The ASD-120 AC Sequenced Power Distro is an extremely compact, low cost rackmount power distribution system that is ideal for touring PA systems, touring musical and theatrical acts, mobile recording facilities, on-location film and video shoots, etc.-any situation where AC power must be distributed to multiple circuits and a hard-wired, built-in system is missing, inadequate, or impractical. Use of a Power Distro is cost-effective, both in terms of the convenience it offers and the elimination of bulky and expensive parallel feeds and related connectors. The ASD-120 offers many more features as well.

Features:

• 120 amp total load
  
• Six 20 amp, 120 volt circuits, each with a status indicator
  
• Oversized buss bars
  
• Four buss design accommodates 120V or 240V single phase, or 208V three phase power
  
• Six widely spaced duplex outlets on rear panel
  
• Outlets can be powered up and down in sequence
  
• Three position switch allows each circuit to be part of the power sequencing, or to be switched on/off independently
  
• Sequence timing can be initiated from unit or remotely, using low voltage control wires
  
• Sequence control signals are available on rear panel to drive additional ASD-120's or other devices and circuits
  
• Front panel key switch for security
  
• Compact two rack space package
  
• Most economical product of its type
  
  Specification:
  Input Current:
  120 amps
  
  Input Voltage:
  Either: 120V single phase, 240V single phase, or 208V 3-phase
  
  Output:
  Six identical 20 amp, 120V circuits
  
  Delay Interval:
  0.5 to 5 seconds per step (adjustable with internal trimpot)
  
  Circuit Breakers:
  Thermal, 20 amp
  
  Spike Protection Mode:
  Line to neutral on each circuit
  
  Spike Clamping Voltage:
  TVSS rating 400V peak, L-N, N-G, L-G (tested to UL 1449)
  
  Response time:
  1 nanosecond
  
  Maximum surge current:
  6,500 amps
  
  Maximum spike energy:
  80 joules per circuit
  
  Mechanical: Dimensions:
  3.5 inch H x 19 inch W x 8 inch D, rack mount. Weight: 20 lbs (9.1 kg). Construction: Steel chassis, zinc chromate plating; .125" brushed and black anodized aluminum front panel.
  
  Power consumption:
  6 Watts
  
  Safety Information:
  All current-carrying components are UL/CSA listed.