Subscape 10

The Subscape 10 is a direct-burial, 10” subwoofer to complement Periscape speakers. With 250 watts (RMS) of power handling, it is an ideal companion to Periscape spike-mount speakers. Once installed, the only visible part of the speaker is a discreet, brown vent cap. One Subscape subwoofer is suitable for installations of up to 7 Periscape units; additional subwoofers are recommended for larger installations. The Subscape 10 may also be used with other Rockustics speakers or other outdoor products. A built-in transformer provides convenience for 70V installations; the subwoofer may also be operated in 8 ohm direct mode. When installed in 8 ohm mode, we recommend the use of the PhaseTech P350 subwoofer amp.

Nominal Impedance 8 Ohm

Impedance (min) 8 Ohm

Sensitivity dB @ 2.83V/1M 87.0 dB

Sensitivity dB @ 1W/1M (2) 87.0 dB

Frequency Response (± 3 dB) 32 Hz - 105 Hz

Frequency Response (±10 dB) 25 Hz - 150 Hz

Max. Program Power 500W

Max. Continuous Power RMS 250W

Max. Power SPL @ 1 M 111.0 dB

Tap Selector 3 sets bare wire leads with optional transformer bypass

Transformer Options 70.7 / 100 Volt option with 8 Ohm direct

Transducer - Low Frequency Driver 10" Polypropylene Cone w/ Butyl Rubber Surround

Colors Brown

Height (SM = Height) 635 mm / 25"