{"title":"Outdoor Speakers","description":"","products":[{"product_id":"atlas-sound-ah42-212","title":"Atlas Sound AH42-212","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eThe AtlasIED AH42-212 Series stadium horn is designed to deliver high sound pressure levels and high intelligibility across wide areas in directional sound applications. Each speaker system consists of a UV-resistant fiberglass enclosure and three-stage, corrosion resistant steel mesh filtering system that make them highly weather and pest resistant. Each model features a three way design with dual 12\" woofers, a 1.5\" exit compression midrange driver and a 1\" exit high frequency compression driver that combine to provide 750 watts RMS power handling in full range mode.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan\u003eA specially designed crossover provides frequency division and extensive driver protection for each band pass. All models are 8Ω impedance and can be easily bi-amped (LF\/MF+HF) by removing the exterior jumper for use with high-powered systems where greater system control and protection is required (Atlas Model ASP-MG24 speaker controller is recommended for these applications). Suspension mounting is facilitated via multiple forged eyebolts. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the \u003cspan\u003ea href=\"\/Solutions\/PartNumber\/TSD-HF11.html\" target=\"_blank\"\u0026gt;TSD-HF11\u003c\/span\u003e unit designed specifically to protect horns from low frequency damage.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 3 Way Design \u003c\/li\u003e \u003cli\u003e High Pass Single 1\" High Frequency Exit Compression Driver \u003c\/li\u003e \u003cli\u003e Single 1.5\" Midrange Exit Compression Driver \u003c\/li\u003e \u003cli\u003e Low Pass Dual 12\" Cast Frame Woofers \u003c\/li\u003e \u003cli\u003e 750 Watts RMS Power Handling (Full Range) \u003c\/li\u003e \u003cli\u003e Weather Resistant Connection Via a Convenient Recessed Terminal Block Located on the Bottom of the Loudspeaker \u003c\/li\u003e \u003cli\u003e 8Ω Nominal Impedance \u003c\/li\u003e \u003cli\u003e Seven, 10mm Internally Reinforced Forged Eyebolts Included for Suspended Installation \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886865449003,"sku":"AS-AH42-212","price":2957.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AH42-212-1__28723.1731429825.1280.1280.png?v=1775672843"},{"product_id":"atlas-sound-ah42-212-bsg","title":"Atlas Sound AH42-212-BSG","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe AtlasIED AH42-212-BSG stadium horn is designed to deliver high sound pressure levels and high intelligibility across wide areas in directional sound applications. Each speaker system consists of a UV-resistant fiberglass enclosure and three-stage, corrosion resistant steel mesh filtering system that make them highly weather and pest resistant. Each model features a three way design with dual 12\" woofers, a 1.5\" exit compression midrange driver and a 1\" exit high frequency compression driver that combine to provide 750 watts RMS power handling in full range mode.\u0026gt;\u003c\/p\u003e\u003cp\u003eA specially designed crossover provides frequency division and extensive driver protection for each band pass. All models are 8Ω impedance and can be easily bi-amped (LF\/MF+HF) by removing the exterior jumper for use with high-powered systems where greater system control and protection is required (Atlas Model ASP-MG24 speaker controller is recommended for these applications). Suspension mounting is facilitated via multiple forged eyebolts.\u003c\/p\u003e\u003cp\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the \u003cspan\u003e  unit designed specifically to protect horns from low frequency damage. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 3 Way Design \u003c\/li\u003e \u003cli\u003e High Pass Single 1\" High Frequency Exit Compression Driver \u003c\/li\u003e \u003cli\u003e Single 1.5\" Midrange Exit Compression Driver \u003c\/li\u003e \u003cli\u003e Low Pass Dual 12\" Cast Frame Woofers \u003c\/li\u003e \u003cli\u003e 750 Watts RMS Power Handling (Full Range) \u003c\/li\u003e \u003cli\u003e Weather Resistant Connection Via a Convenient Recessed Terminal Block Located on the Bottom of the Loudspeaker \u003c\/li\u003e \u003cli\u003e 8Ω Nominal Impedance \u003c\/li\u003e \u003cli\u003e Seven, 10mm Internally Reinforced Forged Eyebolts Included for Suspended Installation \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886865481771,"sku":"AS-AH42-212-BSG","price":2957.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AH42-212-BSG-1__83008.1731429851.1280.1280.png?v=1775672843"},{"product_id":"atlas-sound-ah5040cddia","title":"Atlas Sound AH5040CDDIA","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eReplacement Diaphragm for AH5040\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 12 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886865514539,"sku":"AS-AH5040CDDIA","price":75.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AH5040CDDIA-1__53540.1731430023.1280.1280.jpg?v=1775672843"},{"product_id":"atlas-sound-ah5040cdwoofer","title":"Atlas Sound AH5040CDWOOFER","description":"\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 12 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886865547307,"sku":"AS-AH5040CDWOOFER","price":241.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AS-AH5040CDWOOFER__18390.1731432510.1280.1280.jpg?v=1775672844"},{"product_id":"atlas-sound-ah66-212","title":"Atlas Sound AH66-212","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe AtlasIED AH66-212 Series stadium horn is designed to deliver high sound pressure levels and high intelligibility across wide areas in directional sound applications. Each speaker system consists of a UV-resistant fiberglass enclosure and three-stage, corrosion resistant steel mesh filtering system that make them highly weather and pest resistant. Each model features a three way design with dual 12\" woofers, a 1.5\" exit compression midrange driver and a 1\" exit high frequency compression driver that combine to provide 750 watts RMS power handling in full range mode.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eA specially designed crossover provides frequency division and extensive driver protection for each band pass. All models are 8Ω impedance and can be easily bi-amped (LF\/MF+HF) by removing the exterior jumper for use with high-powered systems where greater system control and protection is required (Atlas Model ASP-MG24 speaker controller is recommended for these applications). Suspension mounting is facilitated via multiple forged eyebolts.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the \u003cspan\u003ea href=\"\/Solutions\/PartNumber\/TSD-HF11.html\" target=\"_blank\"\u0026gt;TSD-HF11\u003c\/span\u003e unit designed specifically to protect horns from low frequency damage.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 3 Way Design \u003c\/li\u003e \u003cli\u003e High Pass Single 1\" High Frequency Exit Compression Driver \u003c\/li\u003e \u003cli\u003e Single 1.5\" Midrange Exit Compression Driver \u003c\/li\u003e \u003cli\u003e Low Pass Dual 12\" Cast Frame Woofers \u003c\/li\u003e \u003cli\u003e 750 Watts RMS Power Handling (Full Range) \u003c\/li\u003e \u003cli\u003e Weather Resistant Connection Via a Convenient Recessed Terminal Block Located on the Bottom of the Loudspeaker \u003c\/li\u003e \u003cli\u003e 8Ω Nominal Impedance \u003c\/li\u003e \u003cli\u003e Seven, 10mm Internally Reinforced Forged Eyebolts Included for Suspended Installation \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886865580075,"sku":"AS-AH66-212","price":2957.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AH66-212-1__97799.1731430511.1280.1280.png?v=1775672845"},{"product_id":"atlas-sound-ah66-212-bsg","title":"Atlas Sound AH66-212-BSG","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe AtlasIED AH66-212 Series stadium horn is designed to deliver high sound pressure levels and high intelligibility across wide areas in directional sound applications. Each speaker system consists of a UV-resistant fiberglass enclosure and three-stage, corrosion resistant steel mesh filtering system that make them highly weather and pest resistant. Each model features a three way design with dual 12\" woofers, a 1.5\" exit compression midrange driver and a 1\" exit high frequency compression driver that combine to provide 750 watts RMS power handling in full range mode.\u003c\/p\u003e\u003cp\u003eA specially designed crossover provides frequency division and extensive driver protection for each band pass. All models are 8Ω impedance and can be easily bi-amped (LF\/MF+HF) by removing the exterior jumper for use with high-powered systems where greater system control and protection is required (Atlas Model ASP-MG24 speaker controller is recommended for these applications). Suspension mounting is facilitated via multiple forged eyebolts.\u003c\/p\u003e\u003cp\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the \u003cspan\u003e  unit designed specifically to protect horns from low frequency damage. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 3 Way Design \u003c\/li\u003e \u003cli\u003e High Pass Single 1\" High Frequency Exit Compression Driver \u003c\/li\u003e \u003cli\u003e Single 1.5\" Midrange Exit Compression Driver \u003c\/li\u003e \u003cli\u003e Low Pass Dual 12\" Cast Frame Woofers \u003c\/li\u003e \u003cli\u003e 750 Watts RMS Power Handling (Full Range) \u003c\/li\u003e \u003cli\u003e Weather Resistant Connection Via a Convenient Recessed Terminal Block Located on the Bottom of the Loudspeaker \u003c\/li\u003e \u003cli\u003e 8Ω Nominal Impedance \u003c\/li\u003e \u003cli\u003e Seven, 10mm Internally Reinforced Forged Eyebolts Included for Suspended Installation \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886865612843,"sku":"AS-AH66-212-BSG","price":2957.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AH66-212-BSG-1__63277.1731430536.1280.1280.png?v=1775672845"},{"product_id":"atlas-sound-ah66-8t-bsg","title":"Atlas Sound AH66-8T-BSG","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAtlasIED model AH66-8T-BSG \"stadium horn\" is ideal for directional sound distribution where full range reproduction, maximum intelligibility and high sound pressure levels are required. \u003cbr\u003e\u003cbr\u003e Applications include football stadiums, sports arenas, baseball fields, convention centers and auditoriums.\u003cbr\u003e\u003cbr\u003e Weather resistant construction features of the AH66-8T-BSG include a multiple screen configuration to prevent moisture from damaging internal components, a perforated aluminum screen covers the large horn mouth, a secondary screen is in place forward of the high frequency driver and a third tightly perforated screen protects the 8\" cast frame woofer. A \"weep\" hole is also included on the back of the large horn \"bell\" to allow evaporation of any condensation that might build up internally.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the \u003cspan\u003ea href=\"\/Solutions\/PartNumber\/TSD-HF11.html\" target=\"_blank\"\u0026gt;TSD-HF11\u003c\/span\u003e unit designed specifically to protect horns from low frequency damage.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 100 Watts Power Handling  \u003c\/li\u003e \u003cli\u003e Constant Directivity Design Offers Controlled Coverage of 65° Horizontal by 65° Vertical (2kHz Octave Band)  \u003c\/li\u003e \u003cli\u003e Driver Compliment Includes 8\" Cast Frame Woofer with a Concentrically Mounted 1\" Exit Compression Driver Coupled to a 65°H x 65°V HF Horn \u003c\/li\u003e \u003cli\u003e Efficiency Rating of 100dB (1W\/1m) \u003c\/li\u003e \u003cli\u003e Heavy Duty Mounting Bracket (Included) Allows for Easy Installation to Most Any Flat Surface \u003c\/li\u003e \u003cli\u003e Maximum Output of 120dB (Rated Power @ 1M)  \u003c\/li\u003e \u003cli\u003e Battleship Gray Finish \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e7.5, 15, 30, and 60 Watts \u0026amp; 8Ω\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e100dB SPL\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e90Hz - 15kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDriver Type\u003c\/td\u003e \u003ctd\u003e1\" HF and 8\" LF\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e65° x 65°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Rating\u003c\/td\u003e \u003ctd\u003e100 Watts\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e20.95\" (53.21cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e17.91\" (45.49cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight\u003c\/td\u003e \u003ctd\u003e61.00 lbs (27.67 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886865645611,"sku":"AS-AH66-8T-BSG","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AH66-8T-BSG-3__31586.1731430559.1280.1280.png?v=1775672845"},{"product_id":"atlas-sound-ah8stwoofer","title":"Atlas Sound AH8STWOOFER","description":"\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 12 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886865711147,"sku":"AS-AH8STWOOFER","price":120.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AS-AH8STWOOFER-1__73267.1731432575.1280.1280.jpg?v=1775672845"},{"product_id":"atlas-sound-ah94-212","title":"Atlas Sound AH94-212","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe AtlasIED AH94-212 Series stadium horn is designed to deliver high sound pressure levels and high intelligibility across wide areas in directional sound applications. Each speaker system consists of a UV-resistant fiberglass enclosure and three-stage, corrosion resistant steel mesh filtering system that make them highly weather and pest resistant. Each model features a three way design with dual 12\" woofers, a 1.5\" exit compression midrange driver and a 1\" exit high frequency compression driver that combine to provide 750 watts RMS power handling in full range mode.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eA specially designed crossover provides frequency division and extensive driver protection for each band pass. All models are 8Ω impedance and can be easily bi-amped (LF\/MF+HF) by removing the exterior jumper for use with high-powered systems where greater system control and protection is required (Atlas Model ASP-MG24 speaker controller is recommended for these applications). Suspension mounting is facilitated via multiple forged eyebolts.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the \u003cspan\u003ea href=\"\/Solutions\/PartNumber\/TSD-HF11.html\" target=\"_blank\"\u0026gt;TSD-HF11\u003c\/span\u003e unit designed specifically to protect horns from low frequency damage.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 3 Way Design \u003c\/li\u003e \u003cli\u003e High Pass Single 1\" High Frequency Exit Compression Driver \u003c\/li\u003e \u003cli\u003e Single 1.5\" Midrange Exit Compression Driver \u003c\/li\u003e \u003cli\u003e Low Pass Dual 12\" Cast Frame Woofers \u003c\/li\u003e \u003cli\u003e 750 Watts RMS Power Handling (Full Range) \u003c\/li\u003e \u003cli\u003e Weather Resistant Connection Via a Convenient Recessed Terminal Block Located on the Bottom of the Loudspeaker \u003c\/li\u003e \u003cli\u003e 8Ω Nominal Impedance \u003c\/li\u003e \u003cli\u003e Seven, 10mm Internally Reinforced Forged Eyebolts Included for Suspended Installation \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886866006059,"sku":"AS-AH94-212","price":2957.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AH94-212-1__92721.1731430140.1280.1280.png?v=1775672847"},{"product_id":"atlas-sound-ah94-212-bsg","title":"Atlas Sound AH94-212-BSG","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe AtlasIED AH94-212-BSG Series stadium horn is designed to deliver high sound pressure levels and high intelligibility across wide areas in directional sound applications. Each speaker system consists of a UV-resistant fiberglass enclosure and three-stage, corrosion resistant steel mesh filtering system that make them highly weather and pest resistant. Each model features a three way design with dual 12\" woofers, a 1.5\" exit compression midrange driver and a 1\" exit high frequency compression driver that combine to provide 750 watts RMS power handling in full range mode.\u003c\/p\u003e\u003cp\u003eA specially designed crossover provides frequency division and extensive driver protection for each band pass. All models are 8Ω impedance and can be easily bi-amped (LF\/MF+HF) by removing the exterior jumper for use with high-powered systems where greater system control and protection is required (Atlas Model ASP-MG24 speaker controller is recommended for these applications). Suspension mounting is facilitated via multiple forged eyebolts.\u003c\/p\u003e\u003cp\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the \u003cspan\u003e  unit designed specifically to protect horns from low frequency damage. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 3 Way Design \u003c\/li\u003e \u003cli\u003e High Pass Single 1\" High Frequency Exit Compression Driver \u003c\/li\u003e \u003cli\u003e Single 1.5\" Midrange Exit Compression Driver \u003c\/li\u003e \u003cli\u003e Low Pass Dual 12\" Cast Frame Woofers \u003c\/li\u003e \u003cli\u003e 750 Watts RMS Power Handling (Full Range) \u003c\/li\u003e \u003cli\u003e Weather Resistant Connection Via a Convenient Recessed Terminal Block Located on the Bottom of the Loudspeaker \u003c\/li\u003e \u003cli\u003e 90° x 40° Dispersion \u003c\/li\u003e \u003cli\u003e 8Ω Nominal Impedance \u003c\/li\u003e \u003cli\u003e Seven, 10mm Internally Reinforced Forged Eyebolts Included for Suspended Installation \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886866038827,"sku":"AS-AH94-212-BSG","price":2957.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AH94-212-BSG-1__37414.1731430172.1280.1280.png?v=1775672848"},{"product_id":"atlas-sound-ah94-8t-bsg","title":"Atlas Sound AH94-8T-BSG","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAtlasIED model AH94-8T-BSG \"stadium horn\" is ideal for directional sound distribution where full range reproduction, maximum intelligibility and high sound pressure levels are required. \u003cbr\u003e\u003cbr\u003e Applications include football stadiums, sports arenas, baseball fields, convention centers and auditoriums.\u003cbr\u003e\u003cbr\u003e Weather resistant construction features of the AH94-8T-BSG include a multiple screen configuration to prevent moisture from damaging internal components, a perforated aluminum screen covers the large horn mouth, a secondary screen is in place forward of the high frequency driver and a third tightly perforated screen protects the 8\" cast frame woofer. A \"weep\" hole is also included on the back of the large horn \"bell\" to allow evaporation of any condensation that might build up internally.\u003c\/p\u003e\u003cp\u003eLearn more about the importance of  protecting paging horns from low frequency damage  and view the  TSD-HF11  unit designed specifically to protect horns from low frequency damage.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 100 Watts Power Handling  \u003c\/li\u003e \u003cli\u003e Constant Directivity Design Offers Controlled Coverage of 90° Horizontal by 40° Vertical (2kHz Octave Band)  \u003c\/li\u003e \u003cli\u003e Driver Compliment Includes 8\" Cast Frame Woofer with a Concentrically Mounted 1\" Exit Compression Driver Coupled to a 90°H x 40°V HF Horn \u003c\/li\u003e \u003cli\u003e Efficiency Rating of 101dB (1W\/1m) \u003c\/li\u003e \u003cli\u003e Heavy Duty Mounting Bracket (Included) Allows for Easy Installation to Most Any Flat Surface \u003c\/li\u003e \u003cli\u003e Maximum Output of 121dB (Rated Power @ 1M)  \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e7.5, 15, 30, and 60 Watts \u0026amp; 8Ω\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e101dB SPL\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e90Hz - 15kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDriver Type\u003c\/td\u003e \u003ctd\u003e1\" HF and 8\" LF\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e90° x 40°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e19.66\" (49.93cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight\u003c\/td\u003e \u003ctd\u003e63.00 lbs (28.58 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886866071595,"sku":"AS-AH94-8T-BSG","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AH94-8T-BSG-3__16428.1731430251.1280.1280.png?v=1775672848"},{"product_id":"atlas-sound-ah99-12t-bsg","title":"Atlas Sound AH99-12T-BSG","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAtlasIED model AH99-12T-BSG \"stadium horn\" is ideal for directional sound distribution where full range reproduction, maximum intelligibility and high sound pressure levels are required. \u003cbr\u003e\u003cbr\u003e Applications include football stadiums, sports arenas, baseball fields, convention centers and auditoriums.\u003cbr\u003e\u003cbr\u003e Weather resistant construction features of the AH99-12T-BSG include a multiple screen configuration to prevent moisture from damaging internal components, a perforated aluminum screen covers the large horn mouth, a secondary screen is in place forward of the high frequency driver and a third tightly perforated screen protects the single 12\" cast frame woofer. A \"weep\" hole is also included on the back of the large horn \"bell\" to allow evaporation of any condensation that might build up internally.\u003c\/p\u003e\u003cp\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the  \u003cspan\u003eTSD-HF11\u003c\/span\u003e  unit designed specifically to protect horns from low frequency damage.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Constant Directivity Design Offers Controlled Coverage of 90º Horizontal by 90 º Vertical (2kHz Octave Band)  \u003c\/li\u003e \u003cli\u003e Heavy Duty Mounting Bracket (Included) Allows for Easy Installation to Most Any Flat Surface \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e7.5, 15, 30, and 60 Watts \u0026amp; 8Ω\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e101dB SPL\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e80Hz - 15kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDriver Type\u003c\/td\u003e \u003ctd\u003e1\" HF and 12\" LF\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e90° x 90°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e22.06\" (56.03 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight\u003c\/td\u003e \u003ctd\u003e87.00 lbs (39.46 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886866104363,"sku":"AS-AH99-12T-BSG","price":1512.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AH99-12T-BSG-2__44953.1731430283.1280.1280.png?v=1775672849"},{"product_id":"atlas-sound-ah99-8t-bsg","title":"Atlas Sound AH99-8T-BSG","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAtlasIED model AH99-8T-BSG \"stadium horn\" is ideal for directional sound distribution where full range reproduction, maximum intelligibility and high sound pressure levels are required. \u003cbr\u003e\u003cbr\u003e Applications include football stadiums, sports arenas, baseball fields, convention centers and auditoriums.\u003cbr\u003e\u003cbr\u003e Weather resistant construction features of the AH99-8T-BSG include a multiple screen configuration to prevent moisture from damaging internal components, a perforated aluminum screen covers the large horn mouth, a secondary screen is in place forward of the high frequency driver and a third tightly perforated screen protects the 8\" cast frame woofer. A \"weep\" hole is also included on the back of the large horn \"bell\" to allow evaporation of any condensation that might build up internally.\u003c\/p\u003e\u003cp\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the \u003cspan\u003e TSD-HF11 \u003c\/span\u003e unit designed specifically to protect horns from low frequency damage.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 100 Watts Power Handling  \u003c\/li\u003e \u003cli\u003e Constant Directivity Design Offers Controlled Coverage of 90º Horizontal by 90 º Vertical (2kHz Octave Band)  \u003c\/li\u003e \u003cli\u003e Driver Compliment Includes 8\" Cast Frame Woofer with a Concentrically Mounted 1\" Exit Compression Driver Coupled to a 90°H x 90°V HF Horn \u003c\/li\u003e \u003cli\u003e Efficiency Rating of 101dB (1W\/1m) \u003c\/li\u003e \u003cli\u003e Heavy Duty Mounting Bracket (Included) Allows for Easy Installation to Most Any Flat Surface \u003c\/li\u003e \u003cli\u003e Maximum Output of 121dB (Rated Power @ 1M)  \u003c\/li\u003e \u003cli\u003e Battleship Gray Finish \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e7.5, 15, 30, and 60 Watts \u0026amp; 8Ω\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e101dB SPL\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e90Hz - 15kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDriver Type\u003c\/td\u003e \u003ctd\u003e1\" HF and 8\" LF\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e90° x 90°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Rating\u003c\/td\u003e \u003ctd\u003e100 Watts\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e21.88\" (55.57cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e19.66\" (49.93cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886866169899,"sku":"AS-AH99-8T-BSG","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AH99-8T-BSG-2__71111.1731430309.1280.1280.png?v=1775672849"},{"product_id":"atlas-sound-ap-15tc","title":"Atlas Sound AP-15TC","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe 8-ohm Model AP-15 is a double re-entrant speakers which deliver 15-watts of continuous power handling, superior intelligibility and unparalleled efficiency.The AP-15 Series operates within a nominal frequency response range of 400-14,000 Hz and offers a sensitivity of 120dB at rated power to provide clear voice and signal communication.\u003c\/p\u003e\u003cp\u003eThe trademarked squared-bell design signifies AtlasIED quality and reliability. The Omni-Purpose® mounting bracket (supplied on all models) achieves precise positioning in the vertical and horizontal planes with a single adjustment and includes provisions for speaker installation on conventional surfaces as well as for strapmounting on I-beams or pillars.\u003c\/p\u003e\u003cp\u003eAP Series speakers are U.S. made to assure superior service reliability. Weather-resistant construction is metal and matching ABS plastic with metal components finished in beige epoxy.\u003c\/p\u003e\u003cp\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the \u003cspan\u003e TSD-HF11 \u003c\/span\u003e unit designed specifically to protect horns from low frequency damage.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e White Finish \u003c\/li\u003e \u003cli\u003e Environment Resistant for Outdoor and Indoor Use  \u003c\/li\u003e \u003cli\u003e High-Efficiency Driver with Proven Performance Reliability \u003c\/li\u003e \u003cli\u003e Omni-Purpose™ Bracket for Precise Positioning \u003c\/li\u003e \u003cli\u003e Superior Intelligibility for Voice and Tone Signaling \u003c\/li\u003e \u003cli\u003e Transformer Equipped for Versatile 25, 70.7, or 100V Line Applications \u003c\/li\u003e \u003cli\u003e World Recognized for Quality and Dependability \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e400Hz - 14kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e106dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e1, 2, 3.8, 7.5, 15 @ 70.7V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e70°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40 to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e8 3\/4\" (22.23 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e7 7\/8\" (20.00 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e9 5\/16\" (23.66 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e5.00 lbs (2.27 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40C to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886869807147,"sku":"AS-AP-15TC","price":139.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AP-15TC-1__40583.1731431079.1280.1280.png?v=1775672867"},{"product_id":"atlas-sound-ap-15tu","title":"Atlas Sound AP-15TU","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAtlasIED AP-15TU speakers are equipped with a compression driver providing up to 15 watts RMS power handling capability, superior intelligibility and dispersion to achieve maximum sound projection and penetration.\u003cbr\u003e\u003cbr\u003e Weather-resistant metal construction and re-entrant acoustic path assure protection against water, humidity, vermin and corrosion. The Omni-Purpose® mounting bracket allows directional sound dispersion via vertical and horizontal positioning. Provisions are also included for surface or strap mounting to pillars and I-beams.\u003cbr\u003e\u003cbr\u003e All models include a built-in 25\/70.7V Vari-Tap® transformer featuring a screw-driver adjustable, 7-position watt\/impedance selection switch. Wiring terminals are protected with a vandal-resistant adapter cover for control equipment utilizing cable or conduit. Model AP-15TU is not equipped with a capacitor.\u003c\/p\u003e\u003cp\u003eModel meets or exceeds the UL Listed standards for audible signal appliances and are capable of operating within an ambient temp. range of 66°C (150°F) to -35°C (-30°F). Model complies with UL Standard 1480—Speakers for Fire Protective Signaling Systems and California State Fire Marshal (Title 19).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 15-Watt High Efficiency Compression Driver \u003c\/li\u003e \u003cli\u003e Built-In Vari-Tap® Transformer for Easy Impedance Selection \u003c\/li\u003e \u003cli\u003e Omni-Purpose Surface Mounting Bracket For Precise Positioning \u003c\/li\u003e \u003cli\u003e Optional 5 MFD Capacitor for Line Supervision \u003c\/li\u003e \u003cli\u003e Recommended for High Intelligibility Paging, Intercommunication, and Signaling \u003c\/li\u003e \u003cli\u003e Vandal-Resistant, Weatherproof Construction \u003c\/li\u003e \u003cli\u003e UL Certified, Safety Listed to UL1480  \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e400Hz - 14kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e106dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e70°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Rating\u003c\/td\u003e \u003ctd\u003e15 Watts\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSafety Listed\u003c\/td\u003e \u003ctd\u003e1480\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40 to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e8 3\/4\" (22.23 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e7 7\/8\" (20.00 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e9 5\/16\" (23.66 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e5.00 lbs (2.27 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e70°C (158°F) to -40°C (-40°F)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886869839915,"sku":"AS-AP-15TU","price":141.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AP-15TU-1__67034.1731431127.1280.1280.png?v=1775672869"},{"product_id":"atlas-sound-ap-15tuc","title":"Atlas Sound AP-15TUC","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eModel AP-15TUC is a double re-entrant speakers which delivers 15-watts of continuous power handling, superior intelligibility and unparalleled efficiency. The AP-15 Series operates within a nominal frequency response range of 400Hz - 14kHz and offers a sensitivity of 120dB at rated power to provide clear voice and signal communication.\u003cbr\u003e\u003cbr\u003e The trademarked squared-bell design signifies AtlasIED quality and reliability. The Omni-Purpose® mounting bracket (supplied on all models) achieves precise positioning in the vertical and horizontal planes with a single adjustment and includes provisions for speaker installation on conventional surfaces as well as for strapmounting on I-beams or pillars. \u003cbr\u003e\u003cbr\u003e A built-in, 5 mfd capacitor is provided for line supervision. \u003cbr\u003e\u003cbr\u003eAll models meet or exceed the UL Listed standards for audible signal appliances, standard 1480—Speakers for Fire Protective Signaling Systems and California State Fire Marshal (Title 19).\u003cbr\u003e\u003cbr\u003eAP Series speakers are U.S. made to assure superior service reliability. Weather-resistant construction is metal and matching ABS plastic with metal components finished in grey epoxy.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 15-Watt High Efficiency Compression Driver \u003c\/li\u003e \u003cli\u003e 5 mfd Capacitor for Line Supervision \u003c\/li\u003e \u003cli\u003e Built-In Vari-Tap® Transformer for Easy Impedance Selection \u003c\/li\u003e \u003cli\u003e Omni-Purpose Surface Mounting Bracket For Precise Positioning \u003c\/li\u003e \u003cli\u003e Recommended for High Intelligibility Paging, Intercommunication, and Signaling \u003c\/li\u003e \u003cli\u003e Vandal-Resistant, Weatherproof Construction \u003c\/li\u003e \u003cli\u003e UL Certified, Safety Listed to UL1480  \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e400Hz - 14kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e106dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e1, 2, 3.8, 7.5, 15W @ 70.7V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e70°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40 to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e8 3\/4\" (22.22 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e7 7\/8\" (20.00 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e9 5\/16\" (23.66 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e5.00 lbs (2.27 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40C to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886869872683,"sku":"AS-AP-15TUC","price":158.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AP-15TUC-1__58305.1731431230.1280.1280.png?v=1775672868"},{"product_id":"atlas-sound-ap-15tucr","title":"Atlas Sound AP-15TUCR","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eModel AP-15TUCR is a double re-entrant speakers which delivers 15-watts of continuous power handling, superior intelligibility and unparalleled efficiency. The AP-15 Series operates within a nominal frequency response range of 400Hz - 14kHz and offers a sensitivity of 120dB at rated power to provide clear voice and signal communication.\u003cbr\u003e\u003cbr\u003e The trademarked squared-bell design signifies AtlasIED quality and reliability. The Omni-Purpose® mounting bracket (supplied on all models) achieves precise positioning in the vertical and horizontal planes with a single adjustment and includes provisions for speaker installation on conventional surfaces as well as for strapmounting on I-beams or pillars. A built-in, 5 mfd capacitor is provided for line supervision. \u003cbr\u003e\u003cbr\u003eAll models meet or exceed the UL Listed standards for audible signal appliances, standard 1480—Speakers for Fire Protective Signaling Systems and California State Fire Marshal (Title 19). AP Series speakers are U.S. made to assure superior service reliability. Weather-resistant construction is metal and matching ABS plastic with metal components finished in grey epoxy.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 15-Watt High Efficiency Compression Driver \u003c\/li\u003e \u003cli\u003e 5 mfd Capacitor for Line Supervision \u003c\/li\u003e \u003cli\u003e Built-In Vari-Tap® Transformer for Easy Impedance Selection \u003c\/li\u003e \u003cli\u003e Omni-Purpose Surface Mounting Bracket For Precise Positioning \u003c\/li\u003e \u003cli\u003e Recommended for High Intelligibility Paging, Intercommunication, and Signaling \u003c\/li\u003e \u003cli\u003e Vandal-Resistant, Weatherproof Construction \u003c\/li\u003e \u003cli\u003e UL Certified, Safety Listed to UL1480  \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e400Hz - 14kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e106dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e1, 2, 3.8, 7.5, 15W @ 70.7V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSafety Listed\u003c\/td\u003e \u003ctd\u003eUL 1480\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e70°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40 to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e8 3\/4\" (22.23 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e7 7\/8\" (20.00 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e90 5\/16\" (23.66 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e5.00 lbs (2.27 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40C to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886869905451,"sku":"AS-AP-15TUCR","price":158.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AP-15TUCR-1__15361.1731431156.1280.1280.png?v=1775672869"},{"product_id":"atlas-sound-ap-15tu-usa","title":"Atlas Sound AP-15TU-USA","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe AtlasIED AP-15TU-USA speaker is equipped with a compression driver providing up to 15 Watts RMS power handling capability, superior intelligibility and dispersion to achieve maximum sound projection and penetration. Weather-resistant metal construction and re-entrant acoustic path assure protection against water, humidity, vermin, and corrosion. The Omni-Purpose® mounting bracket allows directional sound dispersion via vertical and horizontal positioning. Provisions are also included for surface or strap mounting to pillars and I-beams.\u003c\/p\u003e\u003cp\u003eThe AP-15TU-USA includes a built-in 25\/70.7V Vari-Tap® transformer featuring a screw-driver adjustable, 7-position watt\/impedance selection switch. Wiring terminals are protected with a vandal-resistant adapter cover for control equipment utilizing cable or conduit.\u003c\/p\u003e\u003cp\u003eThis unit meets or exceeds the UL Listed standards for audible signal appliances and is capable of operating within an ambient temp. range of 70˚C (158˚F) to -40˚C (-40˚F). Additionally the AP-15TU-USA complies with UL Standard 1480 - Speakers for Fire Protective Signaling Systems and California State Fire Marshal (Title 19). The AP-15TU-USA also meets Buy American Act Standards.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e High-Efficiency, 15 Watt Compression Driver \u003c\/li\u003e \u003cli\u003e Built In Vari-Tap® Transformer for Easy Impedance Selection \u003c\/li\u003e \u003cli\u003e Optional 5 MFD Capacitor for Line Supervision \u003c\/li\u003e \u003cli\u003e Omni-Purpose Surface Mounting Bracket For Precise Positioning \u003c\/li\u003e \u003cli\u003e Vandal Resistant Metal Construction for Indoor\/Outdoor Use \u003c\/li\u003e \u003cli\u003e Recommended for High Intelligibility Paging, Intercommunication, and Signaling \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e400Hz-4kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e102dB at 15 Watts, 10ft\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e70˚ (-6dB, 2000Hz Octave Band)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Rating\u003c\/td\u003e \u003ctd\u003e15 Watts Continuous\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e8 3\/4\" (222.25mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e7 7\/8\" (200.03mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e9 5\/16\" (236.54mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight\u003c\/td\u003e \u003ctd\u003e4.0 lbs (1.8kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eTemperature Range\u003c\/td\u003e \u003ctd\u003e70°C (158°F) to -40°C (-40°F)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFinish\u003c\/td\u003e \u003ctd\u003eGrey Baked Epoxy\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40C to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886869938219,"sku":"AS-AP-15TU-USA","price":146.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AP-15TU-USA-1__34539.1731431178.1280.1280.png?v=1775672869"},{"product_id":"atlas-sound-ap-30","title":"Atlas Sound AP-30","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe 8-ohm Model AP-30 is a double re-entrant speakers which deliver 30-watts of continuous power  handling, superior intelligibility and unparalleled efficiency. The AP-30 Series operates within a nominal frequency response range of 300Hz - 12kHz and offers a sensitivity of 121dB at rated power to provide clear voice and signal communication.\u003c\/p\u003e\u003cp\u003eThe trademarked squared-bell design signifies AtlasIED quality and reliability. The Omni-Purpose® mounting bracket (supplied on all models) achieves precise positioning in the vertical and horizontal planes with a single adjustment and includes provisions for speaker installation on conventional surfaces as well as for strap mounting on I-beams or pillars. AP Series speakers are U.S. made to assure superior service reliability. Weather-resistant construction is metal and matching ABS plastic with metal components finished in grey epoxy.\u003c\/p\u003e\u003cp\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the \u003cspan\u003e TSD-HF11 \u003c\/span\u003e unit designed specifically to protect horns from low frequency damage.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Environment Resistant for Outdoor and Indoor Use  \u003c\/li\u003e \u003cli\u003e Grey Finish  \u003c\/li\u003e \u003cli\u003e High-Efficiency Driver with Proven Performance Reliability \u003c\/li\u003e \u003cli\u003e Omni-Purpose™ Bracket for Precise Positioning \u003c\/li\u003e \u003cli\u003e Superior Intelligibility for Voice and Tone Signaling \u003c\/li\u003e \u003cli\u003e World Recognized for Quality and Dependability \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e300Hz - 12kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e108dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e60°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Rating\u003c\/td\u003e \u003ctd\u003e30 Watts\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40 to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e11\" (27.94 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e10\" (25.4 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e10 1\/2\" (26.67 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e6.00 lbs (2.72 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40C to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886870036523,"sku":"AS-AP-30","price":154.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AP-30-1__96274.1731431319.1280.1280.png?v=1775672871"},{"product_id":"atlas-sound-ap-30tc","title":"Atlas Sound AP-30TC","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe AP-30TC is a double re-entrant speaker which delivers 30 watts of continuous power handling, superior intelligibility and unparalleled audio conversion-efficiency. The AP-30TC operates within a nominal frequency range of 300Hz - 12kHz and offers a sensitivity of 126dB at rated power to provide clear voice and signal communication.\u003c\/p\u003e\u003cp\u003eThe AP-30TC each features an integral transformer to meet a variety of distributed system needs. The AP-30T is equipped with a versatile, 3-way, 25, 70.7, 100V line transformer. Transformer is adjustable using AtlasIED's exclusive Vari-Tap® Connect Center which features a 7-position, watts \/ impedance selection switch. The labor saving Vari-Tap terminal is screwdriver adjustable and includes a protective cover with built-in strain relief.\u003cbr\u003e\u003cbr\u003e The trademarked square bell design signifies AtlasIED quality and reliability. The Omni-Purpose mounting bracket  (included on all models) allows precise positioning in the vertical and horizontal planes with a single adjustment and provides for installation of the speaker on conventional surfaces or by strap-mounting to I-beams or pillars. AP Series speakers are U.S. made to assure superior service reliability. Weather-resistant construction is metal and matching ABS plastic with metal components finished in grey epoxy (standard) or beige epoxy if suffixed with (C) where noted.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the \u003cspan\u003e TSD-HF11 \u003c\/span\u003e unit designed specifically to protect horns from low frequency damage.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e White Finish \u003c\/li\u003e \u003cli\u003e Environment Resistant for Outdoor \u0026amp; Indoor Use \u003c\/li\u003e \u003cli\u003e Omni-Purpose Mounting Bracket for Precise Positioning \u003c\/li\u003e \u003cli\u003e Superior Intelligibility for Voice and Tone Signaling \u003c\/li\u003e \u003cli\u003e Transformer Equipped for Versatile 25, 70.7, or 100V Line Applications \u003c\/li\u003e \u003cli\u003e U. S. Trademark Design is World Recognized for Quality and Dependability \u003c\/li\u003e \u003cli\u003e Wide Frequency Response for Optimum Sound Quality \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e300Hz - 12kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e108dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e60°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Rating\u003c\/td\u003e \u003ctd\u003e30 Watts\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40 to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e11\" (27.94 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e10\" (25.4 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e10 1\/2\" (26.67 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e6.30 lbs (2.86 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40C to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886870102059,"sku":"AS-AP-30TC","price":181.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/AP-30TC-1__83222.1731431339.1280.1280.png?v=1775672871"},{"product_id":"atlas-sound-apbk","title":"Atlas Sound APBK","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eReplacement Omni-Purpose® swivel bracket bracket, grey.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Shipping Weight=1.00 lb (0.45 kgs) \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 12 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886870265899,"sku":"AS-APBK","price":29.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/APBK-1__56935.1731431449.1280.1280.png?v=1775672873"},{"product_id":"atlas-sound-apf-15tu","title":"Atlas Sound APF-15TU","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAPF-15TU voice control speaker is equipped with a compression driver to provide up to 15 watts of continuous power handling, superior intelligibility and audio conversion efficiency for maximum sound projection and penetration. APF Series speakers may be flush mounted or recessed directly into interior\/exterior walls or ceilings. Recessed installation may be accomplished by mounting speakers into a 5 1\/2\" deep opening or recessed enclosure. Units will facilitate AtlasIED L20 Serie grilles, enclosures and mounting rings (refer to SL2-1372). Accessory mounting kits Model MK-2 or FAMT-6 can be used to mount speakers into 8\" diameter baffles.\u003cbr\u003e\u003cbr\u003e Models include a built-in 25\/70.7V Vari-Tap transformer featuring a screw-driver adjustable, 7-position watt\/impedance selection switch. Magnet assembly is equipped with self-aligning field replaceable diaphragm. Wiring terminals are protected with a vandal-resistant adapter cover for control equipment utilizing cable or conduit.\u003cbr\u003e\u003cbr\u003e A built-in, 5 mfd capacitor is provided on Model APF-15TUC for line supervision. Model APF-15TU is not equipped with a capacitor. All units are finished in grey baked epoxy.\u003cbr\u003e\u003cbr\u003e All models meet or exceed UL Standard 1480 for Fire Protective Speakers and are capable of operating within an ambient temp. range of 66°C (150°F) to -35°C (-30°F).The all-metal, environmentresistant construction and re-entrant acoustic path assure protection against water, humidity, vermin, physical abuse and corrosion. Models are also California State Fire Marshal Listed.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Choose from Matching Grilles, Enclosures and Mounting. Rings (Order Separately) \u003c\/li\u003e \u003cli\u003e Double Re-Entrant Design Provides Superior Audibility of Voice and Tone Signaling \u003c\/li\u003e \u003cli\u003e High-Efficiency, 15 Watt Compression Driver with Proven Record of Outstanding Service Reliability \u003c\/li\u003e \u003cli\u003e May be Flange or Recess Mounted \u003c\/li\u003e \u003cli\u003e Transformer(T) Equipped Version for 25, 70.7, or 100V Line \u003c\/li\u003e \u003cli\u003e Vandal Resistant Metal Construction for Indoor\/Outdoor Use \u003c\/li\u003e \u003cli\u003e UL Certified, Safety Listed to UL1480  \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e600Hz - 14kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e104dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSafety Listed\u003c\/td\u003e \u003ctd\u003eUL 1480\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e95°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40 to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e5 3\/16\" (13.18 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDiameter\u003c\/td\u003e \u003ctd\u003e5 5\/8\" (14.29 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e5.00 lbs (2.27 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e70°C (158°F) to -40°C (-40°F)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886870626347,"sku":"AS-APF-15TU","price":143.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/APF-15TU-1__78719.1731431502.1280.1280.png?v=1775672875"},{"product_id":"atlas-sound-apf-15tuc","title":"Atlas Sound APF-15TUC","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAPF Series voice control speakers are equipped with a compression driver to provide up to 15 watts of continuous power handling, superior intelligibility and audio conversion efficiency for maximum sound projection and penetration. APF Series speakers may be flush mounted or recessed directly into interior\/exterior walls or ceilings. Recessed installation may be accomplished by mounting speakers into a 5 1\/2\" deep opening or recessed enclosure. Units will facilitate AtlasIED L20 Serie grilles, enclosures and mounting rings (refer to SL2-1372). Accessory mounting kits Model MK-2 or FAMT-6 can be used to mount speakers into 8\" diameter baffles.\u003cbr\u003e\u003cbr\u003e Models include a built-in 25\/70.7V Vari-Tap transformer featuring a screw-driver adjustable, 7-position watt\/impedance selection switch. Magnet assembly is equipped with self-aligning field replaceable diaphragm. Wiring terminals are protected with a vandal-resistant adapter cover for control equipment utilizing cable or conduit.\u003cbr\u003e\u003cbr\u003e A built-in, 5 mfd capacitor is provided on Model APF-15TUC for line supervision. Model APF-15TU is not equipped with a capacitor. All units are finished in grey baked epoxy.\u003cbr\u003e\u003cbr\u003e All models meet or exceed UL Standard 1480 for Fire Protective Speakers and are capable of operating within an ambient temp. range of 66°C (150°F) to -35°C (-30°F).The all-metal, environmentresistant construction and re-entrant acoustic path assure protection against water, humidity, vermin, physical abuse and corrosion. Models are also California State Fire Marshal Listed.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 15-Watt High-Efficiency Compression Driver \u003c\/li\u003e \u003cli\u003e All Metal, Vandal and Environment-Resistant Construction for Indoor\/Outdoor Use Indoor\/Outdoor Use Indoor\/Outdoor Use \u003c\/li\u003e \u003cli\u003e Built-In Vari-Tap® Transformer for Easy Impedance Selection \u003c\/li\u003e \u003cli\u003e Compatible with Round or Square Decorative Baffles \u003c\/li\u003e \u003cli\u003e Flange and Recessed Mounting Provisions for Use on Interior\/Exterior Walls and Ceilings \u003c\/li\u003e \u003cli\u003e Recommended for High-Intelligibility Paging, Intercommunication, and Signaling \u003c\/li\u003e \u003cli\u003e UL Listed For Fire Protective Signaling Systems \u003c\/li\u003e \u003cli\u003e UL Certified, Safety Listed to UL1480  \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e600Hz - 14kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e104dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSafety Listed\u003c\/td\u003e \u003ctd\u003eUL 1480\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e95°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40 to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e5 3\/16\" (13.18 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDiameter\u003c\/td\u003e \u003ctd\u003e5 5\/8\" (14.29 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e5.00 lbs (2.27 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e70°C (158°F) to -40°C (-40°F)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886870659115,"sku":"AS-APF-15TUC","price":160.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/APF-15TUC-1__57075.1731431530.1280.1280.png?v=1775672875"},{"product_id":"atlas-sound-apf-15tu-usa","title":"Atlas Sound APF-15TU-USA","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe APF-15TU-USA voice control speaker is equipped with a compression driver to provide up to 15 Watts of continuous power handling, superior intelligibility and audio conversion efficiency for maximum sound projection and penetration.\u003c\/p\u003e\u003cp\u003eThe APF-15TU-USA may be flush mounted or recessed directly into interior\/exterior walls or ceilings. Recessed installation may be accomplished by mounting speakers into a 51⁄2\" deep opening or recessed enclosure. Units will work with AtlasIED L20 Series grilles, enclosures and mounting rings (refer to ATS003855). Accessory mounting kits Model MK-2 or FAMT-6 can be used to mount speakers into 8\" diameter baffles.\u003c\/p\u003e\u003cp\u003eThe unit includes a built-in 25\/70.7V Vari-Tap® transformer featuring a screw-driver adjustable, 7-position watt\/impedance selection switch. Magnet assembly is equipped with self-aligning field replaceable diaphragm. Wiring terminals are protected with a vandal-resistant adapter cover for control equipment utilizing cable or conduit.\u003c\/p\u003e\u003cp\u003eThe unit is finished in grey baked epoxy. The APF-15TU-USA meets or exceeds UL Standard 1480 for Fire Protective Speakers and are capable of operating within an ambient temperature range of 70˚C (158˚F) to -40˚C (-40˚F). The all-metal, environment-resistant construction and re-entrant acoustic path assure protection against water, humidity, vermin, physical abuse, and corrosion. The unit is also California State Fire Marshal Listed. Additionally, the APF-15TU-USA complies with Buy American Act standards.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 15 Watt High-Efficiency Compression Driver \u003c\/li\u003e \u003cli\u003e All Metal, Vandal and Environment-Resistant Construction for Indoor\/ Outdoor Use \u003c\/li\u003e \u003cli\u003e Built-In Vari-Tap® Transformer for Easy Impedance Selection \u003c\/li\u003e \u003cli\u003e Compatible with Round or Square Decorative Baffles \u003c\/li\u003e \u003cli\u003e Flange and Recessed Mounting Provisions for Use on Interior\/Exterior Walls and Ceilings \u003c\/li\u003e \u003cli\u003e Recommended for High-Intelligibility Paging, Intercommunication, and Signaling \u003c\/li\u003e \u003cli\u003e UL Certified, Safety Listed to UL1480  \u003c\/li\u003e \u003cli\u003e UL Listed for Fire Protective Signalling Systems \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e600Hz - 14kHz (Nominal) 700Hz - 55kHz (+-5dB)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e120dB at 15 Watts (Peak) 114dB at 15 Watts\/1 Meter (Avg) 700Hz - 55kHz 104dB at 1 Watt\/1 Meter (Avg) 700Hz - 55kHz \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e 5 3\/16\" (131.78mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e95° (-6dB, 2000Hz Octave Band)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDiameter\u003c\/td\u003e \u003ctd\u003e 5 3\/8\" (142.88mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight\u003c\/td\u003e \u003ctd\u003e2.5 lbs (1.1kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40° to 70°C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSafety Listed\u003c\/td\u003e \u003ctd\u003eUL 1480\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e5.00 lbs (2.27kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFinish\u003c\/td\u003e \u003ctd\u003eGrey Baked Epoxy\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40C to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886870691883,"sku":"AS-APF-15TU-USA","price":148.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/APF-15TU-USA-1__31118.1731431517.1280.1280.png?v=1775672876"},{"product_id":"atlas-sound-apr-30at","title":"Atlas Sound APR-30AT","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eModel APR-30AT is a 30 watt speaker with 40° circular sound dispersion designed for overhead installation in industrial, transportation, and manufacturing centers. \u003cbr\u003e\u003cbr\u003e Unit is equipped with a combination 25\/70.7\/100 volt transformer with screwdriver-adjust power selection. Suspension ring provided on top of unit. \u003cbr\u003e\u003cbr\u003eFinished in grey baked epoxy.\u003c\/p\u003e\u003cp\u003eOptional Extras:  BX-1A  Vandal resistant cover plate for armored cable and conduit connection. Constructed of cast aluminum.\u003c\/p\u003e\u003cp\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the \u003cspan\u003e TSD-HF11 \u003c\/span\u003e unit designed specifically to protect horns from low frequency damage.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e High Intelligibility for Sound, Intercom and Signal System Use \u003c\/li\u003e \u003cli\u003e Internal 25\/70.7\/100-Volt Transformer \u003c\/li\u003e \u003cli\u003e Radial Dispersion Pattern \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e300Hz - 12kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e110dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e2, 3.8, 7.5, 15, 30W @ 70.7V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e40°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e10 1\/2\" (26.67 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDiameter\u003c\/td\u003e \u003ctd\u003e9 1\/4\" (23.50 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e9.50 lbs (4.31 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40C to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886870790187,"sku":"AS-APR-30AT","price":193.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/APR-30AT-1__26981.1731431583.1280.1280.png?v=1775672877"},{"product_id":"atlas-sound-apt-34at","title":"Atlas Sound APT-34AT","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eModel APT-34AT Surface-mounting speaker  with bi-directional sound  dispersion provides concentrated coverage in corridors, stairwells and walkways in commercial, institutional and industrial applications.\u003cbr\u003e\u003cbr\u003e Twin horn assembly delivers 30 watts of power with a single compression driver (included) and provides 100° sound dispersion in each direction.\u003c\/p\u003e\u003cp\u003eUnit includes the Omni-Purpose® bracket and provisions for surface\/strap mounting. Finished in grey baked epoxy.\u003c\/p\u003e\u003cp\u003eLearn more about the importance of \u003cspan\u003e protecting paging horns from low frequency damage \u003c\/span\u003e and view the \u003cspan\u003e TSD-HF11 \u003c\/span\u003e unit designed specifically to protect horns from low frequency damage.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Includes 30 Watt High Efficiency Driver \u003c\/li\u003e \u003cli\u003e Omni-Purpose Mounting Bracket for Positioning Flexibility on Vertical or Horizontal Planes \u003c\/li\u003e \u003cli\u003e Twin Reflex Projectors Provide High Efficiency Bi-Directional Sound Dispersion \u003c\/li\u003e \u003cli\u003e Weather Resistant Construction for Indoor or Outdoor Installations \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e400Hz - 12.5kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e101dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e2, 3.8, 7.5, 15, 30W @ 70.7V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e175°\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e16 1\/2\" (41.91 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDiameter\u003c\/td\u003e \u003ctd\u003e9 1\/4\" (23.50 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e9.00 lbs (4.08 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOperating Temperature Range\u003c\/td\u003e \u003ctd\u003e-40C to 70C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886871085099,"sku":"AS-APT-34AT","price":194.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/APT-34AT-1__36938.1731431952.1280.1280.png?v=1775672882"},{"product_id":"atlas-sound-aw82-b","title":"Atlas Sound AW82-B","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Atlas Sound AW82-B All Weather Speaker\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Atlas Sound AW82-B is a robust, all-weather speaker designed to bring high-quality audio to outdoor environments. Featuring an 8-inch woofer and capable of handling 150 watts RMS at 8 ohms, this black speaker is engineered to withstand various weather conditions while delivering powerful, clear sound. Whether you're hosting a backyard barbecue, setting up audio for an outdoor event, or creating a permanent outdoor sound system, the AW82-B is built to perform and endure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow Does the AW82-B Perform in Outdoor Settings\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt to brave the elements, the Atlas Sound AW82-B excels in outdoor environments where standard speakers would falter. Its weather-resistant construction protects against rain, snow, and extreme temperatures, ensuring consistent performance year-round. The 8-inch woofer produces rich, full-bodied bass that carries well in open spaces, while the speaker's overall design ensures clear and balanced audio across the frequency spectrum. This makes it ideal for everything from background music to more demanding audio applications in outdoor settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere Can You Install the Atlas Sound AW82-B\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe versatility of the AW82-B makes it suitable for a wide range of outdoor installations. It's perfect for patios, decks, poolside areas, and gardens in residential settings. In commercial applications, these speakers shine in outdoor dining areas, theme parks, sports facilities, and educational campuses. Their durable construction also makes them suitable for marine environments, such as on boats or in dockside installations. The black finish allows the speakers to blend seamlessly with various architectural styles and outdoor decors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose the AW82-B for Your Outdoor Audio Needs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSelecting the right outdoor speaker involves balancing sound quality, durability, and power handling. The Atlas Sound AW82-B hits all these marks with its 150-watt RMS power handling, ensuring it can produce substantial volume without distortion. The 8-ohm impedance makes it compatible with a wide range of amplifiers and receivers, offering flexibility in system design. Its weather-resistant properties mean you won't have to worry about bringing the speakers inside during inclement weather, providing convenience and peace of mind for both permanent and semi-permanent installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen to Upgrade Your Outdoor Audio with the AW82-B\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you've been relying on portable or indoor speakers for your outdoor entertainment, it's time to consider the AW82-B. These speakers are particularly beneficial when you need a permanent outdoor audio solution that doesn't compromise on sound quality or reliability. They're an excellent upgrade for those who frequently entertain outdoors or for businesses looking to create an inviting atmosphere in their outdoor spaces. The AW82-B is also ideal when you need speakers that can withstand varying weather conditions without requiring constant maintenance or replacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Benefits Most from the Atlas Sound AW82-B\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHomeowners who enjoy outdoor living will find the AW82-B an excellent addition to their entertainment setup. Similarly, commercial property managers, event planners, and venue operators will appreciate the speaker's durability and performance for outdoor events and permanent installations. Audio professionals will value the AW82-B for its reliable performance and ease of integration into larger sound systems. Anyone looking to create a high-quality outdoor audio experience without constantly worrying about weather damage will find these speakers to be a valuable investment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnderstanding the Technical Aspects of the AW82-B\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDelving into the technical specifications, the Atlas Sound AW82-B's 8-inch woofer is designed to provide a balanced audio output with a focus on clear midrange and punchy bass. The 150-watt RMS power handling at 8 ohms allows for significant volume output while maintaining audio fidelity. This power rating also provides headroom for dynamic peaks in music, ensuring that the speakers can handle sudden increases in volume without distortion. The all-weather construction involves sealed enclosures and weather-resistant components, protecting the internal elements from moisture and temperature fluctuations, which is crucial for maintaining long-term performance in outdoor settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeather-resistant construction for year-round outdoor use\u003c\/li\u003e\n\u003cli\u003e8-inch woofer for powerful bass response\u003c\/li\u003e\n\u003cli\u003e150 watts RMS power handling capacity\u003c\/li\u003e\n\u003cli\u003e8-ohm impedance for wide amplifier compatibility\u003c\/li\u003e\n\u003cli\u003eDurable black finish for discreet installation\u003c\/li\u003e\n\u003cli\u003eDesigned for both residential and commercial applications\u003c\/li\u003e\n\u003cli\u003eSuitable for various outdoor environments including marine settings\u003c\/li\u003e\n\u003cli\u003eBalanced audio output for clear sound across frequencies\u003c\/li\u003e\n\u003cli\u003eBuilt to withstand extreme temperatures and weather conditions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886873247787,"sku":"AS-AW82-B","price":198.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/7935_1__42998.1731480805.1280.1280.jpg?v=1775672904"},{"product_id":"atlas-sound-gsbs-g","title":"Atlas Sound GSBS-G","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe AtlasIED GSBS-G is an enclosure made of stable polyethylene, which ensures performance in even the most temperamental and unpredictable climates including theme parks, hotels, or any architecturally landscaped area, simplify installation and deliver deep, rich sound. Designed to work with the AtlasIED GSH-G speaker and to blend into any environment.This short base allows for surface mounting. The two-piece design allows for a two-phase installation. In phase one, the base is installed. Phase two, after initial construction is done, the system contractor can return to install the speaker\/transformer.\u003c\/p\u003e\u003cp\u003eThis multiple step process protects the speakers from being damaged during the construction\/landscaping process and also eliminates the potential for theft from the construction site.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Works with Loudspeaker Model GSH-G \u003c\/li\u003e \u003cli\u003e Available in a Green Finish \u003c\/li\u003e \u003cli\u003e Revolutionary two-piece design allows for two-phase installation \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e43Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e83.5dB 1W\/1m (Half Space Ref)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e8, 16 \u0026amp; 32 with 8Ω Bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eDeck-mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e360°H x 50°V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886891073579,"sku":"AS-GSBS-G","price":148.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/GSBS-G-1__91696.1731433200.1280.1280.jpg?v=1775673041"},{"product_id":"atlas-sound-gsbt-g","title":"Atlas Sound GSBT-G","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe AtlasIED GSBT-G is an enclosure made of stable polyethylene, which ensures performance in even the most temperamental and unpredictable climates including theme parks, hotels, or any architecturally landscaped area, simplify installation and deliver deep, rich sound. Designed to work with the AtlasIED GSH-G speaker and to blend into any environment.This tall base allows for raised installation from the ground. The two-piece design allows for a two-phase installation. In phase one, the base is installed. Phase two, after initial construction is done, the system contractor can return to install the speaker\/transformer.\u003c\/p\u003e\u003cp\u003eThis multiple step process protects the speakers from being damaged during the construction\/landscaping process and also eliminates the potential for theft from the construction site.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Works with Loudspeaker Model GSH-G \u003c\/li\u003e \u003cli\u003e Available in a Green Finish \u003c\/li\u003e \u003cli\u003e Revolutionary two-piece design allows for two-phase installation \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e43Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e83.5dB 1W\/1m (Half Space Ref)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e8, 16 \u0026amp; 32 with 8Ω Bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eDeck-mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e360°H x 50°V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886891106347,"sku":"AS-GSBT-G","price":169.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/GSBT-G-1__16671.1731433221.1280.1280.jpg?v=1775673041"},{"product_id":"atlas-sound-gsh-g","title":"Atlas Sound GSH-G","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe AtlasIED GSH-Ggarden speaker, designed for theme parks, hotels, or any architecturally landscaped area, simplify installation and deliver deep, rich sound. The speaker is a coaxial 8\", polypropylene\/kevlar cone with rubber surround, 1.5\" voice coil, 21 oz. magnet and a 1\/2\" mylar dome tweeter.\u003c\/p\u003e\u003cp\u003eThe AtlasIED GSH-Ggarden speaker is designed to be used with either the GSBS-G (short base) or GSBT-G (tall base) to blend into any environment. The two-piece design allows for a two-phase installation. In phase one, the base is installed. Phase two, after initial construction is done, the system contractor can return to install the speaker\/transformer.\u003c\/p\u003e\u003cp\u003eThis multiple step process protects the speakers from being damaged during the construction\/landscaping process and also eliminates the potential for theft from the construction site. The GSS-GGarden Speaker base even has a protective cover to keep debris out during construction. Inside the enclosure is a durable 8\" coaxial speaker with a great sounding 360-degree horizontal dispersion pattern.\u003c\/p\u003e\u003cp\u003eThis speaker can also be ordered as part of a kit with the base:\u003c\/p\u003e\u003cp\u003e    GST-G Speaker and Tall Base\u003c\/p\u003e\u003cp\u003e    GSS-G Speaker and Short Base\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Available in a Green Finish \u003c\/li\u003e \u003cli\u003e Revolutionary two-piece design allows for two-phase installation \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e43Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e83.5dB 1W\/1m (Half Space Ref)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e8, 16 \u0026amp; 32 with 8Ω Bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eDeck-mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e360°H x 50°V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886891139115,"sku":"AS-GSH-G","price":335.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/GSH-G-1__40442.1731433300.1280.1280.png?v=1775673041"},{"product_id":"atlas-sound-gss-g","title":"Atlas Sound GSS-G","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe AtlasIED GSS-Ggarden speaker, designed for theme parks, hotels, or any architecturally landscaped area, simplify installation and deliver deep, rich sound. The speaker is a coaxial 8\", polypropylene\/kevlar cone with rubber surround, 1.5\" voice coil, 21 oz. magnet and a 1\/2\" mylar dome tweeter.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe AtlasIED GSS-Ggarden speaker is designed to blend into any environment.This model includes a short base for surface mounting. The two-piece design allows for a two-phase installation. In phase one, the base is installed. Phase two, after initial construction is done, the system contractor can return to install the speaker\/transformer.\u003c\/p\u003e\u003cp\u003eThis multiple step process protects the speakers from being damaged during the construction\/landscaping process and also eliminates the potential for theft from the construction site. The GSS-GGarden Speaker base even has a protective cover to keep debris out during construction. Inside the enclosure is a durable 8\" coaxial speaker with a great sounding 360-degree horizontal dispersion pattern.\u003c\/p\u003e\u003cp\u003eThe enclosure is made of stable polyethylene, which ensures performance in even the most temperamental and unpredictable climates.\u003c\/p\u003e\u003cp\u003eEach component can also be ordered separately:\u003c\/p\u003e\u003cp\u003e    GSH-G Head Unit\u003c\/p\u003e\u003cp\u003e    GSBT-G Tall Base\u003c\/p\u003e\u003cp\u003e    GSBS-G Short Base\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Available in a Green Finish \u003c\/li\u003e \u003cli\u003e Revolutionary two-piece design allows for two-phase installation \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e43Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e83.5dB 1W\/1m (Half Space Ref)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e8, 16 \u0026amp; 32 with 8Ω Bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eDeck-mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e360°H x 50°V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886891171883,"sku":"AS-GSS-G","price":483.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/GSS-G-1__28078.1731433366.1280.1280.png?v=1775673042"},{"product_id":"atlas-sound-gst-g","title":"Atlas Sound GST-G","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe AtlasIED GST-Ggarden speaker, designed for theme parks, hotels, or any architecturally landscaped area, simplify installation and deliver deep, rich sound. The speaker is a coaxial 8\", polypropylene\/kevlar cone with rubber surround, 1.5\" voice coil, 21 oz. magnet and a 1\/2\" mylar dome tweeter.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe AtlasIED GST-Gis designed to blend into any environment.This model includes a deep base for in-landscape burial. The two-piece design allows for a two-phase installation. In phase one, the base is installed. Phase two, after initial construction is done, the system contractor can return to install the speaker\/transformer.\u003c\/p\u003e\u003cp\u003eThis multiple step process protects the speakers from being damaged during the construction\/landscaping process and also eliminates the potential for theft from the construction site.\u003c\/p\u003e\u003cp\u003eThe GST-GGarden Speaker base even has a protective cover to keep debris out during construction. Inside the enclosure is a durable 8\" coaxial speaker with a great sounding 360-degree horizontal dispersion pattern.\u003c\/p\u003e\u003cp\u003eThe enclosure is made of stable polyethylene, which ensures performance in even the most temperamental and unpredictable climates.\u003c\/p\u003e\u003cp\u003eEach component can also be ordered separatly:\u003c\/p\u003e\u003cp\u003e    GSH-G Head Unit\u003c\/p\u003e\u003cp\u003e    GSBT-G Tall Base\u003c\/p\u003e\u003cp\u003e    GSBS-G Short Base\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Available in a Green Finish \u003c\/li\u003e \u003cli\u003e Convenient, Externally Adjustable 8, 16, and 32 Watt Taps in 70.7V Configuration with 8Ω Bypass Mode \u003c\/li\u003e \u003cli\u003e Deep Base for Landscape Installations \u003c\/li\u003e \u003cli\u003e Revolutionary two-piece design allows for two-phase installation \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e43Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e89.5dB 1W\/1m (Half Space Ref)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e8, 16 \u0026amp; 32 with 8Ω Bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eInground\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDispersion\u003c\/td\u003e \u003ctd\u003e360°H x 50°V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886891204651,"sku":"AS-GST-G","price":505.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/GST-G-1__40330.1731433430.1280.1280.png?v=1775673042"},{"product_id":"atlas-sound-ip-apx","title":"Atlas Sound IP-APX","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAtlasIED IP-APX is a weather resistant constant directivity high-output IP horn with rotating bell and wall \/ pole mount. It complements the Unified Communications (VoIP Communications) investment including on-premises and hosted infrastructure platforms so that announcements can be pushed to people and spaces beyond the world of desktop telephony communication, breaking any traditional audio-path barriers.\u003c\/p\u003e\u003cp\u003eThe AtlasIED IP-APX IP Endpoint features a 60℃ x 40℃ constant- dispersion pattern across the controlled frequency band of 1.25-10 kHz. The rotating bell pivots in precise 15℃ increments for exact on-site positioning of projection angles. A triple lock security mounting method saves installation time and provides long-term stability.\u003c\/p\u003e\u003cp\u003eAtlasIED IP-APX registers as a communication endpoint directly within Singlewire®, AtlasIED®, Syn-Apps® and Intrado® notification applications, supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules and pre-recorded \u0026amp; scheduled announcements, while leveraging the wide area network (WAN) or local area network (LAN) architecture.\u003c\/p\u003e\u003cp\u003eAtlasIED IP-APX supports Call Manager publisher subscriber SIP Service call processing failover. This service provides remote location call processing redundancy when access to the centralized Call Manager is interrupted because of a WAN outage. In Cisco® UMC environment, IPX endpoints can register to either Cisco's basic or advanced 3rd party SIP device service for paging functionality.\u003c\/p\u003e\u003cp\u003eIPX must use Cisco's advanced 3rd party SIP device service when registering to a publisher subscriber configuration. IP-APX endpoint can register as a SIP device directly to a SIP device directly to a SIP server or VoIP Communications Manager for critical alerts and public address applications.\u003c\/p\u003e\u003cp\u003e\u003cimg\u003e \u003cimg\u003e \u003cimg\u003e\u003c\/p\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003ch4\u003eNetwork Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDynamic or Static IP Address\u003c\/li\u003e\n\u003cli\u003eIEEE 802.3 10\/100Base-T Ethernet\u003c\/li\u003e\n\u003cli\u003eIEEE 802.1q Tagging\u003c\/li\u003e\n\u003cli\u003eIEEE 802.3at Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAudio Codec Support\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eG.711 u-law \/ a-law (16 kbit\/s)\u003c\/li\u003e\n\u003cli\u003eG.729 Wideband Audio (64 kbits\/s)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAudio Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIntegrated Amplifier with Secondary 8 output\u003c\/li\u003e\n\u003cli\u003eAux Audio Line-In Balanced (2.8Vpp 10K)\u003c\/li\u003e\n\u003cli\u003eAux Audio Line-Out Balanced (2.8Vpp 10K)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAuto Registration\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSLP for Singlewire Applications\u003c\/li\u003e\n\u003cli\u003e• DHCP Option 72 for Syn-Apps \/ Intrado Applications\u003c\/li\u003e\n\u003cli\u003eIEDNet+ for AtlasIED Applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStatic Configuration\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHTTP GUI for Static Configuration\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eAdditional Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e2 General Purpose Inputs\u003c\/li\u003e\n\u003cli\u003e1 General Purpose Output (2A @ 30 VDC)\u003c\/li\u003e\n\u003cli\u003ePhone \/ Night Loud Ringer\u003c\/li\u003e\n\u003cli\u003eExternal Power Supply Option\u003c\/li\u003e\n\u003cli\u003eHighly Efficient Horn Speaker Provides Greater Output and Coverage\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e400Hz - 7.5kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eVertical Coverage\u003c\/td\u003e \u003ctd\u003e40o (‐6dB, 2000 Hz Octave Band)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHorizontal Coverage\u003c\/td\u003e \u003ctd\u003e60o (‐6dB, 2000 Hz Octave Band)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e107dB at 1 Watt \/ 1 Meter Average\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Rating (PoE+ - IEEE 802.3AT)\u003c\/td\u003e \u003ctd\u003e25 Watts Max (802.3at)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eTHD\u003c\/td\u003e \u003ctd\u003e\u0026lt;0.2%\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e8.02\" (204mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e14.61\" (371mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e13.86\" (352mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight\u003c\/td\u003e \u003ctd\u003e6.45 lbs (2.92kg)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e7.75 lbs (3.51kg)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 12 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886905327659,"sku":"AS-IP-APX","price":1007.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/IP-APX-1__96829.1731442385.1280.1280.jpg?v=1775673148"},{"product_id":"atlas-sound-rockfa62t-br","title":"Atlas Sound ROCKFA62T-BR","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e  AtlasIED’s ROCKFA62T-BR brings Strategy Series® sound quality to the great outdoors by packaging the proven performance of the Strategy Series® FA136  driver in a specially designed, natural looking brown ­enclosure designed to mimic the look of brown granite. AtlasIED’s weather-resistant ROCKFA62T-BR speaker systems offer accurate sound reproduction and nature inspired aesthetics’ in a compact ­simulated, rock enclosure.\u003cbr\u003eSystem components consist of a highly efficient 6\" woofer section and 1⁄2\" PEI (Polyetherimide) dome high frequency tweeter. An internal 32 watt 70.7V \/ 100V transformer is terminated to a 24\" direct burial rated pigtail that includes conductors for all transformer taps including a 1:1 connection for 8Ω operation. In an effort to enhance vocal and musical clarity in multi-speaker outdoor systems, the ROCKFA62T-BR is optimized to complement the FAP62T (for under eave mounting) and the SM63T for on the wall deployment in outdoor high quality sound systems.\u003cbr\u003eTo withstand the harshest environments, the new Strategy Series®  ROCKFA62T-BR ground level deployed speakers are constructed of weather-resistant materials. Woofers feature treated Kevlar® cone and synthetic rubber surrounds and the tweeter is constructed of PEI (Polyetherimide).The speaker systems include an embedded underground eyebolt for a security anchor to prevent theft.\u003cbr\u003e\u003cbr\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Available in a Brown Finish  \u003c\/li\u003e \u003cli\u003e Durable 6\" Coaxial Speakers with a 110-Degree Horizontal Dispersion Pattern \u003c\/li\u003e \u003cli\u003e Kevlar® Treated Woofers Cone with Synthetic Rubber Surround \u003c\/li\u003e \u003cli\u003e Includes an Embedded Underground Eye Bolt for a Security Anchor to Prevent Theft \u003c\/li\u003e \u003cli\u003e Internal 32 Watt 70.7V \/ 100V Transformer Including a 1:1 Connection for 8Ω Operation \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e80Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Rating\u003c\/td\u003e \u003ctd\u003e50 Watts (Transformer 32 Watts)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e88dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCrossover\u003c\/td\u003e \u003ctd\u003e5kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e10.5\" (267mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e9\"(229mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886919385131,"sku":"AS-ROCKFA62T-BR","price":182.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/ROCKFA62T-BR-1__96185.1731434924.1280.1280.png?v=1775673252"},{"product_id":"atlas-sound-sm42t-b","title":"Atlas Sound SM42T-B","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eAll AtlasIED Strategy Series speaker systems are designed to provide high fidelity, long life and installation convenience for commercial and residential applications. Because of their weather-resistant properties they are perfect for use indoors or out. The SM42T includes a 4\" woofer and 1\" tweeter as well as an integrated 70.7V \/ 100V transformer and 8Ω bypass for direct coupled applications.\u003c\/p\u003e\u003cp\u003eUse surface-mount AtlasIED SM42T Series speaker systems for commercial, professional and residential applications or where high-fidelity sound and weather-resistance is desired. Full-range frequency response makes these systems ideal for indoor and outdoor installation, in monaural and stereo foreground or background music systems, and for applications in boutiques\/shops, restaurants\/cafes, corporate AV applications and houses of worship. Multi-position, C-shaped mounting bracket and rugged construction provide optimum installation flexibility and assurance of long-term service.\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Ferrofluid™ Cooled Dome Tweeter \u0026amp; Highly Efficient 4\" Polypropylene Woofer \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll 1\/4\"-20 Hardware Inserts Allow Easy Integration of \"Off The Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound POLYGUARD™ High Frequency Protection Circuit \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAvailable in Black or White\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eColor Matched Heavy-Duty Zinc Chromate Plated \u0026amp; Powder Coated \"C\" Bracket (Included)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eFive-Year Warranty\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eScrewdriver Adjustable 16-Watt 70.7V\/100V Transformer (may be bypassed for 8-ohm operation)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eTRX WAVEGUIDE™- Constant Directivity Style High Frequency Wave Guide System \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction for Year-Round Indoor or Outdoor Use\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUL Certified, Safety Listed to UL1480A\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e2, 4, 8, \u0026amp; 16-Watt and 8Ω\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e88dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e115Hz - 16kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e7\" (17.78 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e5 15\/16\" (15.03 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e5\" (12.7 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e5.00 lbs (2.27 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886924529707,"sku":"AS-SM42T-B","price":87.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM42T-B-2__98045.1731443949.1280.1280.png?v=1775673301"},{"product_id":"atlas-sound-sm42ten-b","title":"Atlas Sound SM42TEN-B","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eEnvironment-resistant EN54-24 certified SM Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and ferrofluid cooled mylar high frequency device. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide™ high frequency director. This design provides smooth, even sound coverage (90° x 90°). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED Poly Guard™ protection circuit. Both drivers feature low-flux-leakage designs enabling the speaker to be used in close proximity to video monitors. For critical video monitoring applications, a minimum distance of 18\" from the edge of the loudspeaker to the edge of the screen is recommended. The SM42TEN-B and SM42TEN-WH includes an internally mounted 16 Watt 70.7V\/100V line matching transformer with screwdriver adjustable external tap selection for use in distributed sound applications.\u003c\/p\u003e\u003cp\u003eTo withstand the harshest environments, the new Strategy Series® SM42TEN-B and SM42TEN-WH surface mount loudspeakers are constructed of weather resistant materials: UVresistant, Polycarbonate\/acrylonitrile butadiene styrene injection molded cabinets; polypropylene woofer cones; powder coated aluminum grilles and all brass hardware. The Strategy Series speaker systems include a versatile yet simple C-bracket designed to provide easy vertical or horizontal installation on just about any surface. Care should be taken to ensure that the chosen mounting surface is strong enough to support the SM42TEN-B and SM42TENWH. Care should also be taken to ensure that the SM42TEN-B and SM42TEN-WH is not exposed to direct precipitation. A 15mm (.59\") threaded hole is provided on the C-bracket to allow the SM series speaker to be mounted on any AtlasIED microphone stand for near-field live sound applications. 2-3\/8\" OC brass 1\/4\" inserts are also provided on the rear of the SM42TEN-B and SM42TENWH to accommodate the AtlasIED SMBALLMOUNT bracket or OMNIMOUNT™ 10 Series brackets. All inserts for mounting knobs are standard 1\/4\"-20 to allow easy substitution of standard “off the shelf\" vandal proof torx head or “one-way\" hardware. Input connectors include a sealed 2-pole terminal strip capable of accepting up to two #16AWG wires. 2, 4, 8 and 16 Watt taps are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. Internal transformer may also be bypassed for 8Ω operation via tap selector switch. A flush cover with wire exit hole is provided to ensure input connections and tap selector switch are protected. Systems are available in Black or White finishes and can be painted to accommodate any architectural considerations.\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Ferrofluid™ Cooled Dome Tweeter \u0026amp; Highly Efficient 4\" Polypropylene Woofer \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll 1\/4\"-20 Hardware Inserts Allow Easy Integration of \"Off The Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound POLYGUARD™ High Frequency Protection Circuit \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAvailable in Black or White\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eColor Matched Heavy-Duty Zinc Chromate Plated \u0026amp; Powder Coated \"C\" Bracket (Included)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eFive-Year Warranty\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eScrewdriver Adjustable 16-Watt 70.7V\/100V Transformer (may be bypassed for 8-ohm operation)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eTRX WAVEGUIDE™- Constant Directivity Style High Frequency Wave Guide System \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction For Year-round Indoor Use, (Not EN54-24 certified for outdoor use), UV-resistant PC \/ ABS, Injection Molded, Weatherproof Enclosure, Powder Coated Aluminum Grilles and all Brass Hardware Inserts\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eEC UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUK UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e2, 4, 8, \u0026amp; 16-Watt and 8Ω Bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e88dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity (EN54-24)\u003c\/td\u003e \u003ctd\u003e67dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e115Hz - 16kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e7\" (17.78 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e5\" (12.7 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e5 15\/16\" (15.03 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e5.00 lbs (2.27 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886924562475,"sku":"AS-SM42TEN-B","price":123.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM42TEN-B-2__30330.1731454613.1280.1280.png?v=1775673302"},{"product_id":"atlas-sound-sm42ten-wh","title":"Atlas Sound SM42TEN-WH","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eEnvironment-resistant EN54-24 certified SM Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and ferrofluid cooled mylar high frequency device. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide™ high frequency director. This design provides smooth, even sound coverage (90° x 90°). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED Poly Guard™ protection circuit. Both drivers feature low-flux-leakage designs enabling the speaker to be used in close proximity to video monitors. For critical video monitoring applications, a minimum distance of 18\" from the edge of the loudspeaker to the edge of the screen is recommended. The SM42TEN-B and SM42TEN-WH includes an internally mounted 16 Watt 70.7V\/100V line matching transformer with screwdriver adjustable external tap selection for use in distributed sound applications.\u003c\/p\u003e\u003cp\u003eTo withstand the harshest environments, the new Strategy Series® SM42TEN-B and SM42TEN-WH surface mount loudspeakers are constructed of weather resistant materials: UVresistant, Polycarbonate\/acrylonitrile butadiene styrene injection molded cabinets; polypropylene woofer cones; powder coated aluminum grilles and all brass hardware. The Strategy Series speaker systems include a versatile yet simple C-bracket designed to provide easy vertical or horizontal installation on just about any surface. Care should be taken to ensure that the chosen mounting surface is strong enough to support the SM42TEN-B and SM42TENWH. Care should also be taken to ensure that the SM42TEN-B and SM42TEN-WH is not exposed to direct precipitation. A 15mm (.59\") threaded hole is provided on the C-bracket to allow the SM series speaker to be mounted on any AtlasIED microphone stand for near-field live sound applications. 2-3\/8\" OC brass 1\/4\" inserts are also provided on the rear of the SM42TEN-B and SM42TENWH to accommodate the AtlasIED SMBALLMOUNT bracket or OMNIMOUNT™ 10 Series brackets. All inserts for mounting knobs are standard 1\/4\"-20 to allow easy substitution of standard “off the shelf\" vandal proof torx head or “one-way\" hardware. Input connectors include a sealed 2-pole terminal strip capable of accepting up to two #16AWG wires. 2, 4, 8 and 16 Watt taps are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. Internal transformer may also be bypassed for 8Ω operation via tap selector switch. A flush cover with wire exit hole is provided to ensure input connections and tap selector switch are protected. Systems are available in Black or White finishes and can be painted to accommodate any architectural considerations.\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Ferrofluid™ Cooled Dome Tweeter \u0026amp; Highly Efficient 4\" Polypropylene Woofer \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll 1\/4\"-20 Hardware Inserts Allow Easy Integration of \"Off The Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound POLYGUARD™ High Frequency Protection Circuit \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAvailable in Black or White\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eColor Matched Heavy-Duty Zinc Chromate Plated \u0026amp; Powder Coated \"C\" Bracket (Included)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eFive-Year Warranty\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eScrewdriver Adjustable 16-Watt 70.7V\/100V Transformer (may be bypassed for 8-ohm operation)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eTRX WAVEGUIDE™- Constant Directivity Style High Frequency Wave Guide System \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction For Year-round Indoor Use, (Not EN54-24 certified for outdoor use), UV-resistant PC \/ ABS, Injection Molded, Weatherproof Enclosure, Powder Coated Aluminum Grilles and all Brass Hardware Inserts\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eEC UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUK UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e2, 4, 8, \u0026amp; 16-Watt and 8Ω Bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e88dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity (EN54-24)\u003c\/td\u003e \u003ctd\u003e67dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e115Hz - 16kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e7\" (17.78 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e5\" (12.7 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e5 15\/16\" (15.03 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e5.00 lbs (2.27 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886924628011,"sku":"AS-SM42TEN-WH","price":123.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM42TEN-WH-3__05299.1731454705.1280.1280.png?v=1775673302"},{"product_id":"atlas-sound-sm42t-wh","title":"Atlas Sound SM42T-WH","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eAll AtlasIED Strategy Series speaker systems are designed to provide high fidelity, long life and installation convenience for commercial and residential applications. Because of their weather-resistant properties they are perfect for use indoors or out. The SM42T includes a 4\" woofer and 1\" tweeter as well as an integrated 70.7V \/ 100V transformer and 8Ω bypass for direct coupled applications.\u003c\/p\u003e\u003cp\u003eUse surface-mount AtlasIED SM42T Series speaker systems for commercial, professional and residential applications or where high-fidelity sound and weather-resistance is desired. Full-range frequency response makes these systems ideal for indoor and outdoor installation, in monaural and stereo foreground or background music systems, and for applications in boutiques\/shops, restaurants\/cafes, corporate AV applications and houses of worship. Multi-position, C-shaped mounting bracket and rugged construction provide optimum installation flexibility and assurance of long-term service.\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Ferrofluid™ Cooled Dome Tweeter \u0026amp; Highly Efficient 4\" Polypropylene Woofer \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll 1\/4\"-20 Hardware Inserts Allow Easy Integration of \"Off The Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound POLYGUARD™ High Frequency Protection Circuit \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAvailable in Black or White\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eColor Matched Heavy-Duty Zinc Chromate Plated \u0026amp; Powder Coated \"C\" Bracket (Included)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eFive-Year Warranty\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eScrewdriver Adjustable 16-Watt 70.7V\/100V Transformer (may be bypassed for 8-ohm operation)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eTRX WAVEGUIDE™- Constant Directivity Style High Frequency Wave Guide System \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction for Year-Round Indoor or Outdoor Use\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUL Certified, Safety Listed to UL1480A\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e2, 4, 8, \u0026amp; 16-Watt and 8Ω\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e88dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e115Hz - 16kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e7\" (17.78 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e5 15\/16\" (15.03 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e5\" (12.7 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e5.00 lbs (2.27 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886924660779,"sku":"AS-SM42T-WH","price":87.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM42T-WH-3__89443.1731446308.1280.1280.png?v=1775673302"},{"product_id":"atlas-sound-sm52t-b","title":"Atlas Sound SM52T-B","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eEnvironment-resistant SM Series speaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and FerroFluid cooled, titanium dome high frequency device. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide high frequency director. \u003cbr\u003e\u003cbr\u003eThis design provides smooth, even sound coverage (90°H x 90°V). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED PolyGuard protection circuit. The SM52T includes an internally mounted 30 Watt 70.7V\/100V line matching transformer with 8\u003cspan\u003eΩ\u003c\/span\u003e  bypass and screwdriver adjustable tap selection for use in distributed sound applications.\u003cbr\u003e\u003cbr\u003eTo withstand the harshest environments, the new Strategy Series SM52T surface mount speakers are constructed of weather resistant materials: UV-resistant, talc impregnated, polypropylene injection molded cabinets; polypropylene woofer cones; powder coated aluminum grilles and all brass hardware. \u003cbr\u003e\u003cbr\u003eThe Strategy Series speaker systems include a versatile, yet simple, C-bracket designed to provide easy vertical or horizontal installation on just about any surface. Ensure that the chosen fixing point is strong enough to support the SM52T. Care should also be taken to prevent the SM52T from being exposed to direct precipitation.\u003cbr\u003e\u003cbr\u003eA 5\/8\"-27 threaded hole is provided on the C-bracket to allow the SM52T series speaker to be mounted on any AtlasIED microphone stand for near-field live sound applications. 2-3\/8\" OC brass inserts are also provided on the rear of the SM52T to accommodate an OMNIMOUNT bracket. All inserts for mounting knobs are standard 1\/4\"-20 to allow easy substitution of off-the-shelf vandal-proof torx® head or \"one-way\" hardware (not sold by AtlasIED).\u003cbr\u003e\u003cbr\u003eInput connectors include a two pole barrier strip with wire capture \"caps\" capable of accepting up to (2) #14AWG cable. .94, 1.9, 3.7, 7.5, 15, 30 watt and 6\u003cspan\u003eΩ\u003c\/span\u003e  bypass taps are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. A tongue-in-groove cover with rubber wire exit grommet is provided to protect the input connections and transformer switch assembly from moisture. Can be painted to accommodate any architectural considerations.\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Ferrofluid™ Cooled Dome Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e100HR Salt Spray Test Per ASTM B117\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll ¼\"-20 Hardware Inserts Allow Easy Integration of \"Off The Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound POLYGUARD™ High Frequency Circuit Diverts Damaging Transient Signals to Protect the Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound TRX WAVEGUIDE™- A Constant Directivity Style High Frequency Wave Guide System Provides Accurate, Even High Frequency Coverage\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAvailable in Black or White\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eColor Matched Heavy-Duty Zinc Chromate Plated \u0026amp; Powder Coated \"C\" Bracket (Included)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eCompact, Two-Way Loudspeaker Systems for Exceptional Performance in Sound Reinforcement Systems\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eFive-Year Warranty\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction for Year-Round Indoor or Outdoor Use: UV-Resistant Talc Impregnated Polypropylene, Injection Molded, Weatherproof Enclosure Powder Coated Aluminum Grilles and All Brass Hardware Inserts\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e90dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e.94, 1.9, 3.7, 7.5, 15, 30 \u0026amp; 6Ω bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e10 3\/16\" (28.5 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e5 7\/8\" (14.8 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e6 7\/8\" (17.46 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e8.50 lbs (3.86 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886924759083,"sku":"AS-SM52T-B","price":215.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM52T-B-2__41840.1731446345.1280.1280.png?v=1775673304"},{"product_id":"atlas-sound-sm52ten-b","title":"Atlas Sound SM52TEN-B","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eEnvironment-resistant EN54-24 certified SM Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and ferrofluid cooled, titanium dome high frequency device. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide™ high frequency director. This design provides smooth, even sound coverage (90o H x 90oV). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED PolyGuard™ protection circuit. The SM52TEN includes an internally mounted 60 Watt 70.7V\/100V line matching transformer with screwdriver adjustable tap selection for use in distributed sound applications. The tap selection switch also includes a transformer bypass setting for direct coupled 6Ω operation.\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Ferrofluid™ Cooled Dome Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e100HR Salt Spray Test Per ASTM B117\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll ¼\"-20 Hardware Inserts Allow Easy Integration of \"Off The Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound POLYGUARD™ High Frequency Circuit Diverts Damaging Transient Signals to Protect the Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound TRX WAVEGUIDE™- A Constant Directivity Style High Frequency Wave Guide System Provides Accurate, Even High Frequency Coverage\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAvailable in Black or White\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eColor Matched Heavy-Duty Zinc Chromate Plated \u0026amp; Powder Coated \"C\" Bracket (Included)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eCompact, Two-Way Loudspeaker Systems for Exceptional Performance in Sound Reinforcement Systems\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eFive-Year Warranty\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction For Year-round Indoor Use, (Not EN54-24 certified for outdoor use), UV-resistant PC \/ ABS, Injection Molded, Weatherproof Enclosure, Powder Coated Aluminum Grilles and all Brass Hardware Inserts\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eEC UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUK UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e.94, 1.9, 3.7, 7.5, 15, 30 \u0026amp; 6Ω Bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e90dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity (EN54-24)\u003c\/td\u003e \u003ctd\u003e69dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e93Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e10 3\/16\" (28.5 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e5 7\/8\" (14.8 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e6 7\/8\" (17.46 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e8.50 lbs (3.86 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886924791851,"sku":"AS-SM52TEN-B","price":230.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM52TEN-B-2__16458.1731454728.1280.1280.png?v=1775673304"},{"product_id":"atlas-sound-sm52ten-wh","title":"Atlas Sound SM52TEN-WH","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eEnvironment-resistant EN54-24 certified SM Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and ferrofluid cooled, titanium dome high frequency device. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide™ high frequency director. This design provides smooth, even sound coverage (90o H x 90oV). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED PolyGuard™ protection circuit. The SM52TEN includes an internally mounted 60 Watt 70.7V\/100V line matching transformer with screwdriver adjustable tap selection for use in distributed sound applications. The tap selection switch also includes a transformer bypass setting for direct coupled 6Ω operation.\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Ferrofluid™ Cooled Dome Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e100HR Salt Spray Test Per ASTM B117\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll ¼\"-20 Hardware Inserts Allow Easy Integration of \"Off The Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound POLYGUARD™ High Frequency Circuit Diverts Damaging Transient Signals to Protect the Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound TRX WAVEGUIDE™- A Constant Directivity Style High Frequency Wave Guide System Provides Accurate, Even High Frequency Coverage\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAvailable in Black or White\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eColor Matched Heavy-Duty Zinc Chromate Plated \u0026amp; Powder Coated \"C\" Bracket (Included)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eCompact, Two-Way Loudspeaker Systems for Exceptional Performance in Sound Reinforcement Systems\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eFive-Year Warranty\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction For Year-round Indoor Use, (Not EN54-24 certified for outdoor use), UV-resistant PC \/ ABS, Injection Molded, Weatherproof Enclosure, Powder Coated Aluminum Grilles and all Brass Hardware Inserts\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eEC UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUK UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e.94, 1.9, 3.7, 7.5, 15, 30 \u0026amp; 6Ω Bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e90dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity (EN54-24)\u003c\/td\u003e \u003ctd\u003e69dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e93Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e10 3\/16\" (28.5 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e5 7\/8\" (14.8 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e6 7\/8\" (17.46 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e8.50 lbs (3.86 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886924824619,"sku":"AS-SM52TEN-WH","price":230.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM52TEN-WH-3__15606.1731454742.1280.1280.png?v=1775673304"},{"product_id":"atlas-sound-sm52t-wh","title":"Atlas Sound SM52T-WH","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eEnvironment-resistant SM Series speaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and FerroFluid cooled, titanium dome high frequency device. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide high frequency director. \u003cbr\u003e\u003cbr\u003eThis design provides smooth, even sound coverage (90°H x 90°V). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED PolyGuard protection circuit. The SM52T includes an internally mounted 30 Watt 70.7V\/100V line matching transformer with 8\u003cspan\u003eΩ\u003c\/span\u003e  bypass and screwdriver adjustable tap selection for use in distributed sound applications.\u003cbr\u003e\u003cbr\u003eTo withstand the harshest environments, the new Strategy Series SM52T surface mount speakers are constructed of weather resistant materials: UV-resistant, talc impregnated, polypropylene injection molded cabinets; polypropylene woofer cones; powder coated aluminum grilles and all brass hardware. \u003cbr\u003e\u003cbr\u003eThe Strategy Series speaker systems include a versatile, yet simple, C-bracket designed to provide easy vertical or horizontal installation on just about any surface. Ensure that the chosen fixing point is strong enough to support the SM52T. Care should also be taken to prevent the SM52T from being exposed to direct precipitation.\u003cbr\u003e\u003cbr\u003eA 5\/8\"-27 threaded hole is provided on the C-bracket to allow the SM52T series speaker to be mounted on any AtlasIED microphone stand for near-field live sound applications. 2-3\/8\" OC brass inserts are also provided on the rear of the SM52T to accommodate an OMNIMOUNT bracket. All inserts for mounting knobs are standard 1\/4\"-20 to allow easy substitution of off-the-shelf vandal-proof torx® head or \"one-way\" hardware (not sold by AtlasIED).\u003cbr\u003e\u003cbr\u003eInput connectors include a two pole barrier strip with wire capture \"caps\" capable of accepting up to (2) #14AWG cable. .94, 1.9, 3.7, 7.5, 15, 30 watt and 6\u003cspan\u003eΩ\u003c\/span\u003e  bypass taps are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. A tongue-in-groove cover with rubber wire exit grommet is provided to protect the input connections and transformer switch assembly from moisture. Can be painted to accommodate any architectural considerations.\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Ferrofluid™ Cooled Dome Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e100HR Salt Spray Test Per ASTM B117\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll ¼\"-20 Hardware Inserts Allow Easy Integration of \"Off The Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound POLYGUARD™ High Frequency Circuit Diverts Damaging Transient Signals to Protect the Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound TRX WAVEGUIDE™- A Constant Directivity Style High Frequency Wave Guide System Provides Accurate, Even High Frequency Coverage\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAvailable in Black or White\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eColor Matched Heavy-Duty Zinc Chromate Plated \u0026amp; Powder Coated \"C\" Bracket (Included)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eCompact, Two-Way Loudspeaker Systems for Exceptional Performance in Sound Reinforcement Systems\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eFive-Year Warranty\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction for Year-Round Indoor or Outdoor Use: UV-Resistant Talc Impregnated Polypropylene, Injection Molded, Weatherproof Enclosure Powder Coated Aluminum Grilles and All Brass Hardware Inserts\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e90dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e.94, 1.9, 3.7, 7.5, 15, 30 \u0026amp; 6Ω bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e10 3\/16\" (28.5 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e5 7\/8\" (14.8 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e6 7\/8\" (17.46 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e8.50 lbs (3.86 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886924857387,"sku":"AS-SM52T-WH","price":215.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM52T-WH-1__74876.1731446548.1280.1280.png?v=1775673305"},{"product_id":"atlas-sound-sm63t-b","title":"Atlas Sound SM63T-B","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eEnvironment-resistant SM Series speaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and FerroFluid cooled, titanium dome high frequency device. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide high frequency director. \u003cbr\u003e\u003cbr\u003eThis design provides smooth, even sound coverage (120°H x 120°V). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED PolyGuard protection circuit. The SM63T includes an internally mounted 32 Watt 70.7V\/100V line matching transformer with 8\u003cspan\u003eΩ\u003c\/span\u003e  bypass and screwdriver adjustable tap selection for use in distributed sound applications.\u003cbr\u003e\u003cbr\u003eTo withstand the harshest environments, the new Strategy Series SM63T surface mount speakers are constructed of weather resistant materials: UV-resistant, talc impregnated, polypropylene injection molded cabinets; polypropylene woofer cones; powder coated aluminum grilles and all brass hardware. \u003cbr\u003e\u003cbr\u003eThe Strategy Series speaker systems include a versatile, yet simple, C-bracket designed to provide easy vertical or horizontal installation on just about any surface. Ensure that the chosen fixing point is strong enough to support the SM63T. Care should also be taken to prevent the SM63T from being exposed to direct precipitation.\u003cbr\u003e\u003cbr\u003eA 5\/8\"-27 threaded hole is provided on the C-bracket to allow the SM63T series speaker to be mounted on any AtlasIED microphone stand for near-field live sound applications. 2-3\/8\" OC brass inserts are also provided on the rear of the SM63T to accommodate an OMNIMOUNT bracket. All inserts for mounting knobs are standard 1\/4\"-20 to allow easy substitution of off-the-shelf vandal-proof torx® head or \"one-way\" hardware (not sold by AtlasIED).\u003cbr\u003e\u003cbr\u003eInput connectors include a two pole barrier strip with wire capture \"caps\" capable of accepting up to (2) #14AWG cable. 4, 8, 16, 32-watt and 8\u003cspan\u003eΩ\u003c\/span\u003e  bypass taps are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. A tongue-in-groove cover with rubber wire exit grommet is provided to protect the input connections and transformer switch assembly from moisture. Can be painted to accommodate any architectural considerations.\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Ferrofluid™ Cooled Dome Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e100HR Salt Spray Test Per ASTM B117\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll ¼\"-20 Hardware Inserts Allow Easy Integration of \"Off The Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound POLYGUARD™ High Frequency Circuit Diverts Damaging Transient Signals to Protect the Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAvailable in Black or White\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eColor Matched Heavy-Duty Zinc Chromate Plated \u0026amp; Powder Coated \"C\" Bracket (Included)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eCompact, Two-Way Loudspeaker Systems for Exceptional Performance in Sound Reinforcement Systems\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eFive-Year Warranty\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e\u003cp\u003e\u003cspan\u003eHighly Efficient 6.5\" Polypropylene Woofer\u003c\/span\u003e\u003c\/p\u003e\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction for Year-Round Indoor or Outdoor Use: UV-Resistant Talc Impregnated Polypropylene, Injection Molded, Weatherproof Enclosure Powder Coated Aluminum Grilles and All Brass Hardware Inserts\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUL Certified, Safety Listed to UL1480A\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e88dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e4, 8, 16, 32 \u0026amp; 8Ω bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e104Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e10.27\" (26.09 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e6.68\" (16.97 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e7.24\" (18.39 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e6.55 lbs (2.97 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886925086763,"sku":"AS-SM63T-B","price":286.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM63T-B-2__12841.1731452554.1280.1280.png?v=1775673308"},{"product_id":"atlas-sound-sm63ten-b","title":"Atlas Sound SM63TEN-B","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eEnvironment-resistant EN54-24 certified SM Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and ferrofluid cooled, polymer reinforced linen composite dome high frequency device. This design provides smooth, even sound coverage (120° conical). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED PolyGuard™ protection circuit. The SM63TEN includes an internally mounted 32-Watt 70.7V\/100V line matching transformer with screwdriver adjustable tap selection for use in distributed sound applications. The tap selection switch also includes a transformer bypass setting for direct coupled 8Ω operation.\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Ferrofluid™ Cooled Dome Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e100HR Salt Spray Test Per ASTM B117\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll ¼\"-20 Hardware Inserts Allow Easy Integration of \"Off The Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound POLYGUARD™ High Frequency Circuit Diverts Damaging Transient Signals to Protect the Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAvailable in Black or White\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eColor Matched Heavy-Duty Zinc Chromate Plated \u0026amp; Powder Coated \"C\" Bracket (Included)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eCompact, Two-Way Loudspeaker Systems for Exceptional Performance in Sound Reinforcement Systems\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eFive-Year Warranty\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction For Year-round Indoor Use, (Not EN54-24 certified for outdoor use), UV-resistant PC \/ ABS, Injection Molded, Weatherproof Enclosure, Powder Coated Aluminum Grilles and all Brass Hardware Inserts\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e\u003cp\u003e\u003cspan\u003eHighly Efficient 6.5\" Polypropylene Woofer\u003c\/span\u003e\u003c\/p\u003e\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eEC UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUK UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e4, 8, 16, 32 \u0026amp; 8Ω bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e88.5dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity (EN54-24)\u003c\/td\u003e \u003ctd\u003e72dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e104Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e10.27\" (26.09 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e7.24\" (18.39 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e6.68\" (16.97 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e6.55 lbs (2.97 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886925119531,"sku":"AS-SM63TEN-B","price":293.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM63TEN-B-2__38930.1731454840.1280.1280.png?v=1775673309"},{"product_id":"atlas-sound-sm63ten-wh","title":"Atlas Sound SM63TEN-WH","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eEnvironment-resistant EN54-24 certified SM Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and ferrofluid cooled, polymer reinforced linen composite dome high frequency device. This design provides smooth, even sound coverage (120° conical). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED PolyGuard™ protection circuit. The SM63TEN includes an internally mounted 32-Watt 70.7V\/100V line matching transformer with screwdriver adjustable tap selection for use in distributed sound applications. The tap selection switch also includes a transformer bypass setting for direct coupled 8Ω operation.\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Ferrofluid™ Cooled Dome Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e100HR Salt Spray Test Per ASTM B117\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll ¼\"-20 Hardware Inserts Allow Easy Integration of \"Off The Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound POLYGUARD™ High Frequency Circuit Diverts Damaging Transient Signals to Protect the Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAvailable in Black or White\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eColor Matched Heavy-Duty Zinc Chromate Plated \u0026amp; Powder Coated \"C\" Bracket (Included)\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eCompact, Two-Way Loudspeaker Systems for Exceptional Performance in Sound Reinforcement Systems\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eFive-Year Warranty\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction For Year-round Indoor Use, (Not EN54-24 certified for outdoor use), UV-resistant PC \/ ABS, Injection Molded, Weatherproof Enclosure, Powder Coated Aluminum Grilles and all Brass Hardware Inserts\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e\u003cp\u003e\u003cspan\u003eHighly Efficient 6.5\" Polypropylene Woofer\u003c\/span\u003e\u003c\/p\u003e\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eEC UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUK UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e4, 8, 16, 32 \u0026amp; 8Ω bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e88.5dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity (EN54-24)\u003c\/td\u003e \u003ctd\u003e72dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e104Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e10.27\" (26.09 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e7.24\" (18.39 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e6.68\" (16.97 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e6.55 lbs (2.97 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886925152299,"sku":"AS-SM63TEN-WH","price":293.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM63TEN-WH-3__74199.1731454846.1280.1280.png?v=1775673309"},{"product_id":"atlas-sound-sm63t-wh","title":"Atlas Sound SM63T-WH","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eEnvironment-resistant SM Series speaker systems  offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and FerroFluid cooled, titanium dome high frequency device. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide high frequency director.\u003cbr\u003e\u003cbr\u003eThis design provides smooth, even sound coverage (120°H x 120°V). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED PolyGuard protection circuit. The SM63T includes an internally mounted 32-Watt 70.7V\/100V line matching transformer with 8\u003cspan\u003eΩ\u003c\/span\u003ebypass and screwdriver adjustable tap selection for use in distributed sound applications.\u003cbr\u003e\u003cbr\u003eTo withstand the harshest environments, the new Strategy Series SM63T surface mount speakers are constructed of weather resistant materials: UV-resistant, talc impregnated, polypropylene injection molded cabinets; polypropylene woofer cones; powder coated aluminum grilles and all brass hardware.\u003cbr\u003e\u003cbr\u003eThe Strategy Series speaker systems include a versatile, yet simple, C-bracket designed to provide easy vertical or horizontal installation on just about any surface. Ensure that the chosen fixing point is strong enough to support the SM63T. Care should also be taken to prevent the SM63T from being exposed to direct precipitation.\u003cbr\u003e\u003cbr\u003eA 5\/8\"-27 threaded hole is provided on the C-bracket to allow the SM63T series speaker to be mounted on any AtlasIED microphone stand for near-field live sound applications. 2-3\/8\" OC brass inserts are also provided on the rear of the SM63T to accommodate an OMNIMOUNT bracket. All inserts for mounting knobs are standard 1\/4\"-20 to allow easy substitution of off-the-shelf vandal-proof torx® head or \"one-way\" hardware (not sold by AtlasIED).\u003cbr\u003e\u003cbr\u003eInput connectors include a two pole barrier strip with wire capture \"caps\" capable of accepting up to (2) #14AWG cable. 4, 8, 16, 32-watt and 8\u003cspan\u003eΩ\u003c\/span\u003ebypass taps are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. A tongue-in-groove cover with rubber wire exit grommet is provided to protect the input connections and transformer switch assembly from moisture. Can be painted to accommodate any architectural considerations.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 1\" Ferrofluid™ Cooled Dome Tweeter \u003c\/li\u003e \u003cli\u003e 100HR Salt Spray Test Per ASTM B117 \u003c\/li\u003e \u003cli\u003e All ¼\"-20 Hardware Inserts Allow Easy Integration of \"Off The Shelf\" Security Hardware \u003c\/li\u003e \u003cli\u003e Atlas Sound POLYGUARD™ High Frequency Circuit Diverts Damaging Transient Signals to Protect the Tweeter \u003c\/li\u003e \u003cli\u003e Available in Black or White \u003c\/li\u003e \u003cli\u003e Color Matched Heavy-Duty Zinc Chromate Plated \u0026amp; Powder Coated \"C\" Bracket (Included) \u003c\/li\u003e \u003cli\u003e Compact, Two-Way Loudspeaker Systems for Exceptional Performance in Sound Reinforcement Systems \u003c\/li\u003e \u003cli\u003e Five-Year Warranty \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cspan\u003eHighly Efficient 6.5\" Polypropylene Woofer\u003c\/span\u003e\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e Weather-Resistant Construction for Year-Round Indoor or Outdoor Use: UV-Resistant Talc Impregnated Polypropylene, Injection Molded, Weatherproof Enclosure Powder Coated Aluminum Grilles and All Brass Hardware Inserts \u003c\/li\u003e \u003cli\u003e OMNIMOUNT™ Compatible \u003c\/li\u003e \u003cli\u003e UL Certified, Safety Listed to UL1480A \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e88dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e4, 8, 16, 32 \u0026amp; 8Ω bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e104Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e10.27\" (26.09 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e6.68\" (16.97 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e7.24\" (18.39 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e6.55 lbs (2.97 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 60 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886925185067,"sku":"AS-SM63T-WH","price":286.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM63T-WH-1__36823.1731446365.1280.1280.png?v=1775673310"},{"product_id":"atlas-sound-sm82t-b","title":"Atlas Sound SM82T-B","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eEnvironment-resistant SM Series speaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and 1\" exit high frequency compression driver. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide high frequency director. This product is UL 1480A listed.\u003cbr\u003e\u003cbr\u003eThis design provides smooth, even sound coverage (65°H x 65°V). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED PolyGuard protection circuit. \u003cbr\u003e\u003cbr\u003eThe SM82T includes an internally mounted 60-watt 70.7V\/100V line matching transformer with 8Ω bypass and screwdriver adjustable tap selection for use in distributed sound applications. To withstand the harshest environments, the new Strategy Series SM82T surface mount speakers are constructed of weather resistant materials: UV-resistant, talc impregnated, polypropylene injection molded cabinets; polypropylene woofer cones; powder coated aluminum grilles and all brass hardware. \u003cbr\u003e\u003cbr\u003eThe Strategy Series speaker systems include a versatile, yet simple, C-bracket designed to provide easy vertical or horizontal installation on just about any surface. Ensure that the chosen fixing point is strong enough to support the SM82T. Care should also be taken to prevent the SM82T from being exposed to direct precipitation.\u003cbr\u003e\u003cbr\u003eA 5\/8\"-27 threaded hole is provided on the C-bracket to allow the SM82T series speaker to be mounted on any AtlasIED microphone stand for near-field live sound applications. 2-3\/8\" OC brass inserts are also provided on the rear of the SM82T to accommodate an OMNIMOUNT bracket (not sold by AtlasIED).\u003c\/p\u003e\u003cp\u003eAll inserts for mounting knobs are standard 1\/4\"-20 to allow easy substitution of off-the-shelf vandal-proof torx® head or \"one-way\" hardware. Input connectors include a two pole barrier strip with wire capture \"caps\" capable of accepting up to (2) #14AWG cable. 1.9, 3.7, 7.5, 15, 30, 60 watt and 8Ω  bypass taps are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. A tongue-in-groove cover with rubber wire exit grommet is provided to protect the input connections and transformer switch assembly from moisture. Can be painted to accommodate any architectural considerations.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Exit Titanium High Frequency Compression Driver\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUL1480A Listed\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll ¼\"-20 Hardware Inserts Allow Easy Integration of \"Off-the-Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound TRX WAVEGUIDE™- A Constant Directivity Style High Frequency Wave Guide System Provides Accurate, Even High Frequency Coverage\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eCompact, 2-way Loudspeaker Systems for Exceptional Performance in Music and Sound Reinforcement Systems\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eConforms to 100HR Salt Spray Test per ASTM B117\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eHighly Efficient 8\" HYCONET Treated Woofer\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003ePOLYGUARD™ High Frequency Circuit Diverts Damaging Transient Signals to Protect the Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eScrewdriver Adjustable 60 Watt 70.7V\/100V Transformer for Distributed Sound Application.\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction for Year-Round Indoor or Outdoor Use: UV-Resistant, Talc Impregnated, Polypropylene, Injection Molded Enclosure, Powder Coated Aluminum Grilles and All Brass Hardware Inserts Color Matched Heavy-Duty Zinc Chromate Plated and Powder Coated \"C\" Bracket (Included) \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e92dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e1.9, 3.8, 7.5, 15, 30, 60 \u0026amp; 8Ω bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e16 1\/2\" (41.9 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e9 1\/16\" (23.0 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e8 7\/16 (21.4 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e20.00 lbs (9.07 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886925479979,"sku":"AS-SM82T-B","price":368.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM82T-B-2__71979.1731446815.1280.1280.png?v=1775673313"},{"product_id":"atlas-sound-sm82ten-b","title":"Atlas Sound SM82TEN-B","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eEnvironment-resistant EN54-24 certified SM Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and ferrofluid cooled, titanium dome high frequency device. Vocal and musical clarity are optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide™ high frequency director. This design provides smooth, even sound coverage (65oH x 65oV). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. The AtlasIED PolyGuard™ protection circuit provides high frequency component protection. To withstand the harshest environments, the Strategy Series SM82TEN surface mount loudspeakers are constructed of weather resistant materials: UV-resistant, talc impregnated, polypropylene injection molded cabinets; HYCONE treated paper woofer cones; powder coated aluminum grilles and all brass hardware. The Strategy Series speaker systems include a versatile, yet simple, C-bracket designed to provide easy vertical or horizontal installation on just about any surface. A 15mm (.59\") hole is provided on the C-bracket to allow the SM82T speaker to be mounted on any AtlasIED microphone stand for nearfield live sound applications. Four 4 1\/4\" x 2\" (108mm x 51mm) OC brass inserts are also provided on the rear of the SM82TEN-B and SM82TEN-WH to accommodate OMNIMOUNT™ 30 series brackets. (OMNIMOUNT 30.0 WB recommended for wall mounting.\u003c\/p\u003e\u003cp\u003eAll inserts for mounting knobs are standard 1\/4\"–20 to allow easy substitution of off-the-shelf vandal-proof torx head or “one-way hardware.Input connectors include a two-pole barrier strip with wire capture “caps” capable of accepting up to two #16AWG cables. 1.9, 3.7, 7.5,15, 30 and 60 Watt taps, plus a transformer bypass setting for direct coupled 8Ω operation are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. A tongue-in-groove cover with rubber wire exit grommet is provided to protect the input connections and transformer switch assembly from moisture. Systems are available in black or white and may be painted to accommodate any architectural considerations.\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Exit Titanium High Frequency Compression Driver\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUL1480A Listed\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll ¼\"-20 Hardware Inserts Allow Easy Integration of \"Off-the-Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound TRX WAVEGUIDE™- A Constant Directivity Style High Frequency Wave Guide System Provides Accurate, Even High Frequency Coverage\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eCompact, 2-way Loudspeaker Systems for Exceptional Performance in Music and Sound Reinforcement Systems\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eConforms to 100HR Salt Spray Test per ASTM B117\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eHighly Efficient 8\" HYCONET Treated Woofer\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003ePOLYGUARD™ High Frequency Circuit Diverts Damaging Transient Signals to Protect the Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eScrewdriver Adjustable 60 Watt 70.7V\/100V Transformer for Distributed Sound Application.\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction For Year-round Indoor Use, (Not EN54-24 certified for outdoor use), UV-resistant PC \/ ABS, Injection Molded, Weatherproof Enclosure, Powder Coated Aluminum Grilles and all Brass Hardware Inserts\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eEC UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUK UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e1.9, 3.8, 7.5, 15, 30, 60 \u0026amp; 8Ω bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e92dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity (EN54-24)\u003c\/td\u003e \u003ctd\u003e72db\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e65Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e16 1\/2\" (41.9 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e9 1\/16\" (23.0 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e8 7\/16 (21.4 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e20.00 lbs (9.07 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886925512747,"sku":"AS-SM82TEN-B","price":368.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM82TEN-B-2__15052.1731454792.1280.1280.png?v=1775673313"},{"product_id":"atlas-sound-sm82ten-wh","title":"Atlas Sound SM82TEN-WH","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003eEnvironment-resistant EN54-24 certified SM Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and ferrofluid cooled, titanium dome high frequency device. Vocal and musical clarity are optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide™ high frequency director. This design provides smooth, even sound coverage (65oH x 65oV). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. The AtlasIED PolyGuard™ protection circuit provides high frequency component protection. To withstand the harshest environments, the Strategy Series SM82TEN surface mount loudspeakers are constructed of weather resistant materials: UV-resistant, talc impregnated, polypropylene injection molded cabinets; HYCONE treated paper woofer cones; powder coated aluminum grilles and all brass hardware. The Strategy Series speaker systems include a versatile, yet simple, C-bracket designed to provide easy vertical or horizontal installation on just about any surface. A 15mm (.59\") hole is provided on the C-bracket to allow the SM82T speaker to be mounted on any AtlasIED microphone stand for nearfield live sound applications. Four 4 1\/4\" x 2\" (108mm x 51mm) OC brass inserts are also provided on the rear of the SM82TEN-B and SM82TEN-WH to accommodate OMNIMOUNT™ 30 series brackets. (OMNIMOUNT 30.0 WB recommended for wall mounting.\u003c\/p\u003e\u003cp\u003eAll inserts for mounting knobs are standard 1\/4\"–20 to allow easy substitution of off-the-shelf vandal-proof torx head or “one-way hardware.Input connectors include a two-pole barrier strip with wire capture “caps” capable of accepting up to two #16AWG cables. 1.9, 3.7, 7.5,15, 30 and 60 Watt taps, plus a transformer bypass setting for direct coupled 8Ω operation are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. A tongue-in-groove cover with rubber wire exit grommet is provided to protect the input connections and transformer switch assembly from moisture. Systems are available in black or white and may be painted to accommodate any architectural considerations.\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Exit Titanium High Frequency Compression Driver\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUL1480A Listed\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll ¼\"-20 Hardware Inserts Allow Easy Integration of \"Off-the-Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound TRX WAVEGUIDE™- A Constant Directivity Style High Frequency Wave Guide System Provides Accurate, Even High Frequency Coverage\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eCompact, 2-way Loudspeaker Systems for Exceptional Performance in Music and Sound Reinforcement Systems\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eConforms to 100HR Salt Spray Test per ASTM B117\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eHighly Efficient 8\" HYCONET Treated Woofer\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003ePOLYGUARD™ High Frequency Circuit Diverts Damaging Transient Signals to Protect the Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eScrewdriver Adjustable 60 Watt 70.7V\/100V Transformer for Distributed Sound Application.\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction For Year-round Indoor Use, (Not EN54-24 certified for outdoor use), UV-resistant PC \/ ABS, Injection Molded, Weatherproof Enclosure, Powder Coated Aluminum Grilles and all Brass Hardware Inserts\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eEC UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUK UK Certificate of constancy of performance to EN54-24\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e1.9, 3.8, 7.5, 15, 30, 60 \u0026amp; 8Ω bypass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e92dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity (EN54-24)\u003c\/td\u003e \u003ctd\u003e72db\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e65Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e16 1\/2\" (41.9 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e9 1\/16\" (23.0 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e8 7\/16 (21.4 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e20.00 lbs (9.07 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886925545515,"sku":"AS-SM82TEN-WH","price":368.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM82TEN-WH-3__02952.1731454833.1280.1280.png?v=1775673313"},{"product_id":"atlas-sound-sm82tuc-b","title":"Atlas Sound SM82TUC-B","description":"\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cp\u003e\u003cstrong\u003eNote: The SM82TUC-B is UL 1480 certified.  UL 1480 is the standard for \u003cem\u003eSpeakers for Fire Alarm and Signaling Systems\u003c\/em\u003e.  This provides that these listed speakers can be used in code required Fire Alarm Systems (NFPA 72).  \u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eEnvironment-resistant SM Series speaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and 1\" exit high frequency compression driver. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide high frequency director. \u003cbr\u003e\u003cbr\u003eThis design provides smooth, even sound coverage (65°H x 65°V). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED PolyGuard protection circuit. \u003cbr\u003e\u003cbr\u003eThe SM82TUC includes an internally mounted 60-watt 70.7V\/100V line matching transformer with screwdriver adjustable tap selection for use in distributed sound applications. To withstand the harshest environments, the new Strategy Series SM82TUC surface mount speakers are constructed of weather resistant materials: UV-resistant, talc impregnated, polypropylene injection molded cabinets; polypropylene woofer cones; powder coated aluminum grilles and all brass hardware. \u003cbr\u003e\u003cbr\u003eThe Strategy Series speaker systems include a versatile, yet simple, C-bracket designed to provide easy vertical or horizontal installation on just about any surface. Ensure that the chosen fixing point is strong enough to support the SM82TUC. Care should also be taken to prevent the SM82TUC from being exposed to direct precipitation.\u003cbr\u003e\u003cbr\u003eA .59\" through hole is provided on the C-bracket to allow the SM82TUC series speaker to be mounted on any AtlasIED microphone stand for near-field live sound applications. 4-1\/4-20 brass inserts are also provided on both ends of the SM82TUC to accommodate an OMNIMOUNT bracket (not sold by AtlasIED).\u003c\/p\u003e\u003cp\u003eAll inserts for mounting knobs are standard 1\/4-20 to allow easy substitution of off-the-shelf vandal-proof torx® head or \"one-way\" hardware. Input connectors include a two pole barrier strip with wire capture \"caps\" capable of accepting up to (2) #14AWG cable. 1.9, 3.7, 7.5, 15, 30, 60 watt taps are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. A tongue-in-groove cover with rubber wire exit grommet is provided to protect the input connections and transformer switch assembly from moisture. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e \u003cdiv\u003e1\" Exit Titanium High Frequency Compression Driver\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eUL Certified, Safety Listed to UL1480\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAll ¼\"-20 Hardware Inserts Allow Easy Integration of \"Off-the-Shelf\" Security Hardware\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eAtlas Sound TRX WAVEGUIDE™- A Constant Directivity Style High Frequency Wave Guide System Provides Accurate, Even High Frequency Coverage\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eCompact, 2-way Loudspeaker Systems for Exceptional Performance in Music and Sound Reinforcement Systems\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eConforms to 100HR Salt Spray Test per ASTM B117\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eHighly Efficient 8\" HYCONET Treated Woofer\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003ePOLYGUARD™ High Frequency Circuit Diverts Damaging Transient Signals to Protect the Tweeter\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eScrewdriver Adjustable 60 Watt 70.7V\/100V Transformer for Distributed Sound Application.\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eWeather-Resistant Construction for Year-Round Indoor or Outdoor Use: UV-Resistant, Talc Impregnated, Polypropylene, Injection Molded Enclosure, Powder Coated Aluminum Grilles and All Brass Hardware Inserts Color Matched Heavy-Duty Zinc Chromate Plated and Powder Coated \"C\" Bracket (Included) \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003eOMNIMOUNT™ Compatible\u003c\/div\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eSpeaker Type\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSensitivity\u003c\/td\u003e \u003ctd\u003e92dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Taps\u003c\/td\u003e \u003ctd\u003e1.9, 3.8, 7.5, 15, 30, 60\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e16 1\/2\" (41.9 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e9 1\/16\" (23.0 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e8 7\/16 (21.4 cm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eShipping Weight\u003c\/td\u003e \u003ctd\u003e20.00 lbs (9.07 kgs)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e\u003ca\u003e60 months from date of purchase\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003c\/div\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886925578283,"sku":"AS-SM82TUC-B","price":376.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/SM82TUC-B-2__98415.1731454895.1280.1280.png?v=1775673314"}],"url":"https:\/\/www.empirepro.com\/collections\/outdoor-speakers\/outdoor-speakers.oembed?page=4","provider":"Empire Pro","version":"1.0","type":"link"}