{"title":"Radial Engineering","description":"","products":[{"product_id":"radial-eng-catapult-mini-tx","title":"Radial Eng Catapult MINI TX","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe Catapult Mini is a compact passive audio snake that allows you to send four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSend four channels of analog audio over a Cat 5\/6 cable\u003c\/li\u003e\r\n\u003cli\u003eAvailable with XLRM, XLRF or ¼” TRS connectors\u003c\/li\u003e\r\n\u003cli\u003eWorks with a building’s existing cable infrastructure\u003c\/li\u003e\r\n\u003cli\u003eCompact and lightweight, yet durable and rugged\u003c\/li\u003e\r\n\u003cli\u003eEconomical Cat 5\/6 cable replaces bulky multichannel audio snakes\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv class=\"col-12 col-sm-6 order-2 order-sm-1\"\u003e\r\n\u003ch4\u003eAnalog audio over Cat 5 wiring\u003c\/h4\u003e\r\n\u003cp\u003eThe Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.\u003c\/p\u003e\r\n\u003cdiv class=\"col-12 col-sm-6\"\u003e\r\n\u003ch4\u003eStraight-wire passive operation\u003c\/h4\u003e\r\n\u003cp\u003eCatapult modules require no power to operate, and since they keep the signal in the analog realm, no digital conversion is necessary. Straight-wire connection from the XLRs to the RJ45 connector on a Cat 5 cable ensures that your audio passes through without coloration or distortion.\u003c\/p\u003e\r\n\u003cdiv class=\"col-12 col-sm-6 order-2 order-sm-1\"\u003e\r\n\u003ch4\u003eUtilize pre-existing cable installations\u003c\/h4\u003e\r\n\u003cp\u003eAs many buildings are already pre-wired for Cat 5, you can take advantage of this to transmit audio between distant rooms without the need to install or supply new cabling. This eliminates the need for bulky and expensive multi-channel audio cable, and allows contractors to benefit from installed network cable and easily connect from one room to another.\u003c\/p\u003e\r\n\u003cdiv class=\"col-12 col-sm-6\"\u003e\r\n\u003ch4\u003eMix \u0026amp; Match\u003c\/h4\u003e\r\n\u003cp\u003eThree versions of the Catapult Mini are available: The Mini TX features female XLR connectors, the Mini RX has male XLRs, and the Mini TRS is equipped with ¼” TRS jacks for balanced connection to any pro audio device.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive splitter\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e7Hz ~ 20KHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e140dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.0005% @ 1kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCommon Mode Rejection Ratio:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;103dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+35dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eGround lift\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR, TRS, RJ45 (model dependant)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR, TRS, RJ45 (model dependant)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e16-gauge steel chassis \u0026amp; outer shell\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e4.125\" x 1.56\" x 1.31\" (105 x 40 x 33mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e0.85lb (0.4kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e6.25\" x 4.25\" x 3\" (159 x 108 x 76mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e1.1lb (0.5kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43086785019947,"sku":"RAD-R800 8028","price":102.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/catapult_mini-34-right-768x501__75037.1682435738.1280.1280.jpg?v=1775683613"},{"product_id":"radial-eng-catapult-mini-rx","title":"Radial Eng Catapult MINI RX","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe Catapult Mini is a compact passive audio snake that allows you to send four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSend four channels of analog audio over a Cat 5\/6 cable\u003c\/li\u003e\r\n\u003cli\u003eAvailable with XLRM, XLRF or ¼” TRS connectors\u003c\/li\u003e\r\n\u003cli\u003eWorks with a building’s existing cable infrastructure\u003c\/li\u003e\r\n\u003cli\u003eCompact and lightweight, yet durable and rugged\u003c\/li\u003e\r\n\u003cli\u003eEconomical Cat 5\/6 cable replaces bulky multichannel audio snakes\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv class=\"col-12 col-sm-6 order-2 order-sm-1\"\u003e\r\n\u003ch4\u003eAnalog audio over Cat 5 wiring\u003c\/h4\u003e\r\n\u003cp\u003eThe Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.\u003c\/p\u003e\r\n\u003cdiv class=\"col-12 col-sm-6\"\u003e\r\n\u003ch4\u003eStraight-wire passive operation\u003c\/h4\u003e\r\n\u003cp\u003eCatapult modules require no power to operate, and since they keep the signal in the analog realm, no digital conversion is necessary. Straight-wire connection from the XLRs to the RJ45 connector on a Cat 5 cable ensures that your audio passes through without coloration or distortion.\u003c\/p\u003e\r\n\u003cdiv class=\"col-12 col-sm-6 order-2 order-sm-1\"\u003e\r\n\u003ch4\u003eUtilize pre-existing cable installations\u003c\/h4\u003e\r\n\u003cp\u003eAs many buildings are already pre-wired for Cat 5, you can take advantage of this to transmit audio between distant rooms without the need to install or supply new cabling. This eliminates the need for bulky and expensive multi-channel audio cable, and allows contractors to benefit from installed network cable and easily connect from one room to another.\u003c\/p\u003e\r\n\u003cdiv class=\"col-12 col-sm-6\"\u003e\r\n\u003ch4\u003eMix \u0026amp; Match\u003c\/h4\u003e\r\n\u003cp\u003eThree versions of the Catapult Mini are available: The Mini TX features female XLR connectors, the Mini RX has male XLRs, and the Mini TRS is equipped with ¼” TRS jacks for balanced connection to any pro audio device.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive splitter\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e7Hz ~ 20KHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e140dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.0005% @ 1kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCommon Mode Rejection Ratio:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;103dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+35dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eGround lift\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR, TRS, RJ45 (model dependant)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR, TRS, RJ45 (model dependant)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e16-gauge steel chassis \u0026amp; outer shell\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e4.125\" x 1.56\" x 1.31\" (105 x 40 x 33mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e0.85lb (0.4kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e6.25\" x 4.25\" x 3\" (159 x 108 x 76mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e1.1lb (0.5kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43086785151019,"sku":"RAD-R800 8029","price":102.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/catapult_mini-34-right-768x501_1__94388.1682435740.1280.1280.jpg?v=1775683613"},{"product_id":"radial-eng-catapult-rack-tx","title":"Radial Eng Catapult Rack TX","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRackmount Cat 5 Analog Audio Distribution\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Catapult Rack is a passive audio snake that allows you to send or receive 12 channels of analog audio over standard Cat 5 or Cat 6 Ethernet cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnalog audio over Cat 5 wiring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Catapult Rack TX and RX act like a typical multi-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect one shielded Cat 5 cable for every four channels of audio and deliver it to any other Radial Catapult module – it will utilize the analog conductors in the cable to deliver four balanced audio lines to any destination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 Rackspace, 3 times the channel count\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Catapult Rack units operate like three modules in one chassis. Since each Cat 5 Ethernet cable can carry four channels, the 12 XLRs on each Catapult Rack are split into three banks, each with their own noise-eliminating ground lift switch and RJ45 Ethernet jacks on the rear panel. You can use three Ethernet cables to connect all 12 channels to a single location, or split them off to any of the Radial Catapult stage boxes, providing you with a fully customizable audio snake system that can connect multiple destinations at once and even include transformer isolation where needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRugged and flexible\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Catapult Rack TX and RX are built to handle the toughest pro touring environments, and like all Catapult modules they include Neutrik etherCON RJ45 connectors. These allow you to use compatible cables with a protective metal shell around the Ethernet connector that protects against accidental disconnection while also preventing damage to the RJ45 plug itself. Another useful feature on the Catapult Rack is the addition of reversible rack ears, which can be mounted on either side of the chassis, so you can have the XLRS or the Ethernet connections facing outwards as necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStraight-wire passive operation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCatapult Rack modules require no power to operate, and since they keep the signal in the analog realm, no digital conversion is necessary. Straight-wire connection from each bank of XLRs to the RJ45 connector on a Cat 5 cable ensures that your audio passes through without coloration or distortion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStraight-wire passive operation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCatapult Rack modules require no power to operate, and since they keep the signal in the analog realm, no digital conversion is necessary. Straight-wire connection from each bank of XLRs to the RJ45 connector on a Cat 5 cable ensures that your audio passes through without coloration or distortion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistribute 12 channels of balanced audio over three Cat 5 cable lines\u003c\/li\u003e\n\u003cli\u003eEasily combines with any other Radial Catapult modules\u003c\/li\u003e\n\u003cli\u003eRobust steel enclosure and locking Neutrik etherCON connectors\u003c\/li\u003e\n\u003cli\u003eReversible rack ears for optimal configuration with any setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudio circuit type: Passive RJ45 to XLR\u003c\/li\u003e\n\u003cli\u003eFrequency response: 10Hz - 100Hz, ±0.05dB\u003c\/li\u003e\n\u003cli\u003eDynamic range: 136dB re +20dBu, 22kHz BW\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion: \u0026lt;0.0003% @ +4dBu, 20Hz - 20kHz\u003c\/li\u003e\n\u003cli\u003eSignal to Noise: \u0026gt;114dB re +4dBu, 22kHz BW\u003c\/li\u003e\n\u003cli\u003eMaximum Input: +20dBu\u003c\/li\u003e\n\u003cli\u003eCross Talk: -130dB between channels @ 1kHz, +4dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGround lift\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Connectors: XLR, RJ45 (model dependant)\u003c\/li\u003e\n\u003cli\u003eOutput Connectors: XLR, RJ45 (model dependant)\u003c\/li\u003e\n\u003cli\u003eExtras: Reversible rack ears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstruction: 12-gauge steel faceplate, 18-gauge steel chassis\u003c\/li\u003e\n\u003cli\u003eFinish: Durable Powder Coat\u003c\/li\u003e\n\u003cli\u003eSize (L x W x D): L: 19\" x H: 1.75\" x D: 3.25\"\u003c\/li\u003e\n\u003cli\u003eWeight: 3.06lbs (1.39kg)\u003c\/li\u003e\n\u003cli\u003ePower: Passive, no power required\u003c\/li\u003e\n\u003cli\u003eConditions: For use in dry locations only between 5°C and 40°C\u003c\/li\u003e\n\u003cli\u003eWarranty: Radial 3-year, transferable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43086785609771,"sku":"RAD-R800 8039","price":247.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/6dceeefd15MBDbxeLCVjHX6I9T2f0HzVJFgJpZiA.wm-dw_b97b2c85-d201-44db-bab3-ec7df54f17e4.webp?v=1775073323"},{"product_id":"radial-eng-powerhouse","title":"Radial Eng Powerhouse","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe Powerhouse is a 10 module 500 series power-rack designed to accommodate both older and newer 500 series modules and provide the studio with maximum density in a standard 19″ rack frame.\u003c\/p\u003e\r\n\u003cp\u003eThe Powerhouse is a ten card-slot 500 series power rack designed to fit three standard 19″ rack-spaces (3RU). Regarding the audio performance, as there is no audio circuitry other than connectors, the Powerhouse will not impart any color or distortion. The Powerhouse employs gold plated 15-pin EDAC card-edge connectors on the inside plane and nickel-silver Neutrik connectors on the back panel for excellent signal transfer. Each slot is equipped with an auto-resetting fuse to protect the system should a faulty module be employed. A 1600 milliamp external supply provides plenty of current to feed the modules and 48V for phantom power.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e10-slot design for maximum density\u003c\/li\u003e\r\n\u003cli\u003eIndividual XLR \u0026amp; ¼” TRS i\/o on each slot\u003c\/li\u003e\r\n\u003cli\u003eEasy-Glide module alignment tray\u003c\/li\u003e\r\n\u003cli\u003eInnovative feed and link functions\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv class=\"col-12 col-sm-6 order-2 order-sm-1\"\u003e\r\n\u003ch4\u003ePowerhouse\u003c\/h4\u003e\r\n\u003cp\u003eThe design begins with heavy 14-gauge steel construction and durable powder coat finish for maximum shielding against noise and greater durability when subjected to road use. An 'easy glide' slider tray makes it painless to align the PCB connector to the 15 pin card edge receptacle when swapping modules. Once connected, the rear panel sports a standard array of XLRs to connect to and from the workstation or mixer. This is augmented with a series of ¼\" TRS connectors that enable cross-patching and open the door to the excitement of parallel signal processing. Instead of having to hard patch modules together using a cable, the Powerhouse incorporates an innovative feed switch that instantly connects the signal to the adjacent module. This makes building signal chains quick and eliminates the need for extra cables. And unlike older racks that require soldering when modules are used in stereo, the Powerhouse is equipped with a stereo link function that takes care of the task with a simple slide of a switch. Unlike older racks that are limited to an average of 130 milliamps per slot, the Powerhouse boasts a 1600 milliamp power supply that lets you share the power as needed. This means it can deliver 300 milliamps to your two tube preamps and still have over 1000 milliamps left in the pool! And just like all Workhorse racks, the Powerhouse is equipped with extra safety features to ensure safe use when mixing and matching various brands.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003eConnection buss from modules to connectors\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eData Compression:\u003c\/td\u003e\r\n\u003ctd\u003eAdheres to the Whos-Doc and VPR Alliance\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003ePhantom Power, OmniPort\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e10 balanced XLR male, 10 ¼\" TRS\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e10 balanced XLR female, 10 ¼\" TRS\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eExtras:\u003c\/td\u003e\r\n\u003ctd\u003e10 slots; 19\" rack mount, 3 rack space; 1600 milliamps available current; 160 mA average current per slot;\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e21.25\" x 11.50\" x 13.25\"\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e13.5 lb (6.1kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003eExternal 100V - 240V AC with 48V Phantom\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025303595,"sku":"RAD-R700 0104","price":729.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/powerhouse-34-left-768x492__08539.1682443248.1280.1280.jpg?v=1775683565"},{"product_id":"radial-eng-cube","title":"Radial Eng Cube","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe Cube is a three module desktop power rack designed to bring the fun and excitement of 500 series modular audio to everyone.\u003c\/p\u003e\r\n\u003cp\u003eThe Radial Cube is a compact desktop 3-slot 500 series power rack that follows the guidelines set out in the Workhorse open-source document (Whos-Doc). This accommodates the very latest Radial modules while being backward compatible with older formats. Regarding the audio performance – there is no audio circuitry other than connectors. The Cube will not impart any color, distortion or artefact. The Cube employs Edac gold plated 15-pin card-edge connectors on the inside and Neutrik connectors with non-tarnishing nickel-silver contacts on the back panel for excellent signal transfer. Each slot is equipped with an auto-resetting fuse to protect the system should a faulty module be employed. A 500 milliamp external supply provides plenty of current to feed the modules and 48V for phantom power.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDesktop power rack houses three 500 series modules\u003c\/li\u003e\r\n\u003cli\u003eCompatible with Radial and older API systems\u003c\/li\u003e\r\n\u003cli\u003eProvides up to 500 milliamps of shared current\u003c\/li\u003e\r\n\u003cli\u003eOptional angles let you recess it into the table top\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eDesktop power supply\u003c\/h4\u003e\r\n\u003cp\u003eFollowing the criteria established by the Radial Workhorse, the Cube is 100% backwards compatible with older API modules while being optimized for Radial's expanding range of preamps, processors and routing devices. Construction begins with a 14 gauge steel frame and features dual gold contact EDAC 15-pin connectors for optimal signal transfer. To maximize headroom, the external supply delivers 500mA of current for power hungry modules plus a separate 48V phantom tap delivers a full 10mA of current for microphone preamps. Rear panel connectivity includes standard XLRs for each slot along with ¼\" TRS connectors for multiple modules, cross patching and parallel processing. Instead of the traditional 'hardwire patch' system employed by others, The Cube employs an innovative feed function that patches modules together in series without the need of a cable. And stereo modules no longer need to be soldered to be paired, they can now be sync'd together using a simple switch. The Cube is also equipped with Omniport on each slot. This TRS jack enables the module manufacturer to implement a unique function for a given module such as a key input on a gate.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003eConnection buss from modules to connectors\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eData Compression:\u003c\/td\u003e\r\n\u003ctd\u003eAdheres to the Whos-Doc and VPR Alliance\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eOmniPort\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e3 balanced XLR male, 3 ¼\" TRS\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e3 balanced XLR male, 3 ¼\" TRS\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eExtras:\u003c\/td\u003e\r\n\u003ctd\u003eDesktop format; 500 milliamps available current; 166mA average current per slot\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14-gauge steel\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e7.5\" x 7.5\" x 6.25\" (190 x 190 x 160mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e5.4 lb (2.5kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e9.0\" x 12.5\" x 9.25\" (229 x 318 x 235mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e7.85 lb (3.6kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003eExternal 100V - 240V AC with 48V Phantom\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025336363,"sku":"RAD-R700 0107","price":306.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/cube-34-left-768x739__32835.1682443250.1280.1280.jpg?v=1775683565"},{"product_id":"radial-eng-sixpack","title":"Radial Eng SixPack","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe SixPack is a desktop power rack for 500 series modules that lets you mix and match up to six modules and safely power them to create a stereo channel strip or unique signal chain.\u003c\/p\u003e\r\n\u003cp\u003eThe Radial SixPack is a 6 slot 500 series rack, intended to be used with all 500 series modules. The design follows the original specifications as developed by companies such as DBX and API while incorporating new features for added flexibility and connectivity. As the SixPack does not buffer or amplify the signal in any way, the specifications are essentially straight wire. Thus it does not introduce distortion or artifact, nor does it introduce any form of personality into the signal chain. As a power-rack, the SixPack is unmatched delivering more current per slot with more features than all others.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePortable 6 slot power rack with carry handle\u003c\/li\u003e\r\n\u003cli\u003ePerfect for stereo channels or as a studio side car\u003c\/li\u003e\r\n\u003cli\u003ePowerful 1600 milliamp supply will not sag when loaded\u003c\/li\u003e\r\n\u003cli\u003eWorkstation ready with front panel convenience XLRs\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv class=\"col-12 col-sm-6 order-2 order-sm-1\"\u003e\r\n\u003ch4\u003eSerious power\u003c\/h4\u003e\r\n\u003cp\u003eThe design begins with a heavy 14-gauge steel construction and durable powder coat finish. This provides extra durability when moving the SixPack around the studio while also providing better shielding against stray magnetic fields. To reduce induced noise, the power supply is external and connects using a 5-pin locking XLR. To ensure positive contact, the module card-edge connector is mated to a double sided EDAC 15-pin receptacle that is 100% compatible with the old API pin format. Extra safety is built-in to ensure malfunctioning modules will not harm the SixPack or other modules that may already be connected. And with 1600 milliamps of shared current, the SixPack exceeds all others with an average of over 265 milliamps per slot to ensure even the most power hungry tube modules will be satisfied.\u003c\/p\u003e\r\n\u003cdiv class=\"col-12 col-sm-6\"\u003e\r\n\u003ch4\u003eConnections\u003c\/h4\u003e\r\n\u003cp\u003eRear panel connectivity includes individual XLR input and output connectors wired in parallel to ¼\" TRS connectors. These may be used as mults or for cross-patching various modules together to create innovative sounding signal paths. A set of 25-pin D-Sub connectors enable the SixPack to easily integrate with a Workstation. Two XLR connectors are front mounted and may be routed to the D-Sub or to inputs 1 and 4 to make patching in a microphone more expedient. Extra features include a feed switch that patches one module into the next, a link switch to combine stereo-ready modules and Omniport, a ¼\" TRS jack that adds extra functionality\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003eConnection buss from modules to connectors\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eData Compression:\u003c\/td\u003e\r\n\u003ctd\u003eAdheres to the Whos-Doc and VPR Alliance\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003ePhantom Power, OmniPort\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e8 balanced XLR male, 8 ¼\" TRS, 25-Pin D-Sub\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e8 balanced XLR female, 8 ¼\" TRS, 25-Pin D-Sub\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eExtras:\u003c\/td\u003e\r\n\u003ctd\u003e6 slots; desktop format; 1600 milliamps available current; 266 mA per slot average current; Feed switch; Stereo link; D-sub pin wiring follows Tascam D-Sub standard\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14-gauge steel\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e6\" x 7.5\" x 12\" (152 x 191 x 305mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e11lb (4.9kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e9.25\" x 11.5\" x 15.25\" (235 x 292 x 387mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003eExternal 100V - 240V AC with 48V Phantom\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025369131,"sku":"RAD-R700 0108","price":459.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/sixpack-34-left-768x575__71106.1682443252.1280.1280.jpg?v=1775683566"},{"product_id":"radial-eng-twin-servo","title":"Radial Eng Twin Servo","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e500 Series Microphone Preamp\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Twin-Servo is a high performance microphone preamp that leverages two discrete 990 op-amps for incredibly clean and transparent operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExceptionally wide frequency response from 0.5Hz to 150kHz\u003c\/li\u003e\n\u003cli\u003eTwin-Servo topology eliminates capacitors in the signal path\u003c\/li\u003e\n\u003cli\u003eVirtually zero phase shift or bandwidth limitation\u003c\/li\u003e\n\u003cli\u003eOversized Jensen transformers for maximum headroom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLegendary Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Twin-Servo utilizes the now-famous JE-990 circuit originally developed by industry icon Deane Jensen in 1988, providing an update in the 500 series format. Its superior performance is derived from two 100% discrete 990 op-amps cascaded in tandem to deliver 60dB of gain with less than 1\/10th the distortion and twice the bandwidth of a single stage design. This also reduces noise at mid and low levels, a critical advantage for those that record with a wide dynamic range. In order to minimize phase distortion, all capacitors have been removed from the audio signal path and replaced by two DC servo feedback circuits. Oversized Jensen transformers are placed at both the input and output of the — producing a frequency response that extends from 0.5Hz to 150kHz. The result is a remarkably detailed and accurate microphone preamp suitable for any critical recording application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwin-Servo Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsing the Twin-Servo with a condenser mic\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Jensen Twin-Servo has almost unlimited bandwidth and tremendous headroom. This makes it a perfect choice for the most demanding recording, particularly when recording highly dynamic signals such as vocals or orchestral instruments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsing the Twin-Servo with an active DI\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen recording live, capturing the direct feed from an instrument can provide much more consistent results as bleed from other instruments can be eliminated. Connect a piezo transducer to the Radial PZ-DI and send this to the Twin-Servo for amazing bottom end!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsing the Twin-Servo with a ribbon mic\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost modern ribbon microphones have plenty of output and can connect directly to the Twin-Servo’s low noise circuitry. When using old vintage mics, add the Radial McBoost to increase the output by up to 25dB for a total of about 85dB of gain!\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025401899,"sku":"RAD-R700 0111 10","price":567.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/twin-servo-34__86952.1732176966.1280.1280.jpg?v=1775683566"},{"product_id":"radial-eng-x-amp-500","title":"Radial Eng X-AMP 500","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe Radial X-Amp is a 500 series module that lets you take a pre-recorded guitar track and send it back to amplifiers and effects so that you can tailor the sound to suit. The advantages of Reamping® are many: when recording, the guitarist need only concentrate on the performance. Working out specific sounds and optimal mic placement can be done later. This eliminates hours of tiresome repetition while allowing the producer to adjust the character of the track as the production evolves.\u003c\/p\u003e\r\n\u003cp\u003eThe X-Amp 500 is an active Re-amp device that interfaces the balanced line-level output from professional recording systems with guitar effects and amplifiers. Two active buffered high impedance outputs with active level controls connect to effect pedals and instrument amplifiers. Each output is transformer isolated to eliminate hum and buzz caused by ground loops. Output-2 includes polarity invert for achieving proper phase alignment between two amps. When installed in a Workhorse 500 series rack the user has access to the Omniport connector. The X-Amp’s Omniport is configured as an instrument preamp allowing a guitar to connect and drive the amplifier outputs.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eActive Reamp® designed for 500 series racks\u003c\/li\u003e\r\n\u003cli\u003e100% discrete class-A electronics for best tone\u003c\/li\u003e\r\n\u003cli\u003eTransformer isolated to eliminate hum and buzz\u003c\/li\u003e\r\n\u003cli\u003eEasy access front panel jacks \u0026amp; controls\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv class=\"col-12 col-sm-6 order-2 order-sm-1\"\u003e\r\n\u003ch4\u003eProfessional Reamp\u003c\/h4\u003e\r\n\u003cp\u003eUsing the X-Amp is 'plug and play' easy to use. The design begins with an XLR balanced line level input located on the 500 series rear panel that feeds the X-Amp. To ensure the very highest fidelity, 100% discrete class-A circuitry is employed. The X-Amp unbalances and buffers the pre-recorded signal where it then feeds two transformer isolated hi-Z guitar level outputs. The ¼\" jacks are front mounted for desk-top convenience and equipped with ground lifts to help eliminate hum and buzz caused by ground loops. Independent level controls enable you to adjust the drive going to each amp for optimal tone. Should one of the amps be out of phase, depressing the 180º quickly brings both in line.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003eClass-A discrete, transformer coupled\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz~20kHz (adjusted for guitar signals -5dB@20kHz) w 100K Ω load\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026lt;0.002% @ 0dBu (20Hz~20kHz)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eIntermodulation Distortion:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026lt;0.04% @ 0dBu input\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003eXLR: 1.2k Ohms\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003eXLR: 600 Ohms\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNoise:\u003c\/td\u003e\r\n\u003ctd\u003e-114dB below 0dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+26dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eVoltage Gain:\u003c\/td\u003e\r\n\u003ctd\u003eXLR to XLR: 0dB ±0.5dB | Omniport to XLR: -3dB ±0.5dB | XLR to 1\/4\": -0.6dB ±0.5dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eData Compression:\u003c\/td\u003e\r\n\u003ctd\u003e40mA, ±16VDC\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003e180° polarity reverse, Ground lift, OmniPort\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR, 1\/4\"\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eExtras:\u003c\/td\u003e\r\n\u003ctd\u003eOmniPort configured as Hi-Z guitar input\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003eStandard 500 series rack format\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e1.5lbs (0.7kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025434667,"sku":"RAD-R700 0130","price":262.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/x-amp-500-34-right-768x924__42960.1682435663.1280.1280.jpg?v=1775683566"},{"product_id":"radial-eng-extc-500","title":"Radial Eng EXTC-500","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe EXTC is a guitar effects interface designed for use inside the Radial Workhorse and other API compatible rack 500 series systems. It features a balanced line level input with variable guitar level send \u0026amp; receive controls for hi-impedance guitar effects. Transformer isolation combined with class-A discreet electronics assures optimal signal transfer. This makes the EXTC the perfect interface for all kinds of effects that otherwise are difficult to use, cause noise or create unbearable hum.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eBalanced interface for guitar effects pedals\u003c\/li\u003e\r\n\u003cli\u003eSeparate send \u0026amp; receive level controls optimize signal path\u003c\/li\u003e\r\n\u003cli\u003eTransformer isolation to eliminate hum and buzz from ground loops\u003c\/li\u003e\r\n\u003cli\u003eCreative tool incorporates effects pedals into your mix\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv class=\"col-12 col-sm-6 order-2 order-sm-1\"\u003e\r\n\u003ch4\u003eReamp and mix through your guitar pedals\u003c\/h4\u003e\r\n\u003cp\u003eThe EXTC-500 is a 500 series module that allows you to get creative with your effects pedals, using them in your mix on any recorded track. Add a touch of distortion or chorus to a lead vocal, flange on a violin, or fuzz on piano - the possibilities are endless. The EXTC-500 takes the line level balanced output of your recording interface and converts it so an instrument level high-Z output optimized for guitar effects pedals, so you can Reamp any track through your pedalboard with ease. Once you've run the signal through your pedals, connect the output back into the EXTC and it will boost it up to a balanced line level so you can connect directly to the input of your recording interface. The EXTC features Radial's class-A buffer for the best audio quality and transformer isolation to eliminate any buzz or hum - so you can focus your attention on using your pedals in new and exciting applications.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003eSolid state with transformer coupled effects loop\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003eDry: 20Hz ~ 20kHz ±1.5dB | Wet: 20Hz ~ 10kHz ±3.5dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eGain:\u003c\/td\u003e\r\n\u003ctd\u003e12dB - send \u0026amp; receive at maximum\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003eDry: \u0026gt;0.005% 0dB output | Wet: \u0026gt;0.002% 0dB output\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eIntermodulation Distortion:\u003c\/td\u003e\r\n\u003ctd\u003eDry: \u0026gt;0.003% 0dBu input | Wet: \u0026lt;0.02% 0dBu input\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNoise:\u003c\/td\u003e\r\n\u003ctd\u003eDry: -93dB | Wet: -84dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003eDry: +26dBu | Wet: +20dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eData Compression:\u003c\/td\u003e\r\n\u003ctd\u003e60mA, ±16VDC\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003e180° polarity reverse, OmniPort\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e1\/4\", XLR\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e1\/4\", XLR\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025467435,"sku":"RAD-R700 0132","price":262.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/extc-34-right__56650.1682435664.1280.1280.jpg?v=1775683567"},{"product_id":"radial-eng-thumbset","title":"Radial Eng ThumbSet","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe ThumbSet screws feature a perfectly sized thumbscrew head for easy mounting without the need of a screwdriver. However, if ever the ThumbSet is over-tightened, a clever slotted head allows a screwdriver to be used to loosen.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025500203,"sku":"RAD-R700 9100","price":16.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/thumbset-screw-single-bw-768x675__28663.1682435666.1280.1280.jpg?v=1775683567"},{"product_id":"radial-eng-500-series-screws","title":"Radial Eng 500 Series Screws","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e500 Series Screws Standard phillips screws for 500 Series racks and modules, 24 pack\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025532971,"sku":"RAD-R700 9101","price":8.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/673ef75bc0b7b83fbb67388f-radial-500-series-rack-screws-24-pack__59121.1732180034.1280.1280.jpg?v=1775701082"},{"product_id":"radial-eng-rackset","title":"Radial Eng RackSet","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRadial RackSet screws are designed to easily and securely mount 19” studio rackmount gear by hand. The oversized easy-grip head is knurled for hand-tightening during installation, and they are also slotted to allow a screwdriver to be used to loosen the screws if necessary. Stainless steel construction ensures that RackSet screws wont strip, along with standard 10-32 threading to fit in most equipment racks. Sold in a set of 12, each screw also includes a nylon washer to prevent marking or wear on equipment when mounted. With a heavy-duty industrial look and feel, RackSet screws are well suited for any home or professional studio environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the RackSet Screws\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge mounting screws for studio rackmount equipment\u003c\/li\u003e\n\u003cli\u003e10-32 thread compatible with 19” equipment racks\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eIndustrial look \u0026amp; feel to suit any recording studio\u003c\/li\u003e\n\u003cli\u003eSold in boxes of 12, including nylon washers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025565739,"sku":"RAD-R700 9104","price":32.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/Rackset-Screw-Single__21190.1732339313.1280.1280.jpg?v=1775701169"},{"product_id":"radial-eng-sixp19-ra","title":"Radial Eng SixP19-RA","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe SixPack Rack adaptor is triple hit! It may be used to mount the SixPack 500 series power rack into a standard 19″ rack or be mounted into a desktop. In this case, a series of mounting holes on the SixPack work in conjunction with the angle brackets to enable both flush and angle mounting options. This optimizes functionality in the studio or enables the SixPack to travel on the road for live touring or provide safe passage when going between studios.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025598507,"sku":"RAD-R700 9105","price":49.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/six-pack-rack-ki-768x492__05469.1682435667.1280.1280.jpg?v=1775683567"},{"product_id":"radial-eng-solo","title":"Radial Eng Solo","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe Radial Solo™ filler panels will keep your Workhorse safe from dust and other contaminants. Radial offers two standard size filler panels to fit the Radial Workhorse and other 500 series racks. These keep your rack safe from dust and other contaminants while providing the inside a protective shield from inexperienced hands. Two sizes to choose from.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025631275,"sku":"RAD-R700 9110","price":10.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/filler-panels-sixpack-768x527__02472.1682435667.1280.1280.jpg?v=1775683568"},{"product_id":"radial-eng-duo","title":"Radial Eng Duo","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe Radial Duo™ filler panels will keep your Workhorse safe from dust and other contaminants. Radial offers two standard size filler panels to fit the Radial Workhorse and other 500 series racks. These keep your rack safe from dust and other contaminants while providing the inside a protective shield from inexperienced hands. Two sizes to choose from.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025664043,"sku":"RAD-R700 9111","price":12.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/filler-panels-sixpack-768x527_1__01282.1682435668.1280.1280.jpg?v=1775683568"},{"product_id":"radial-eng-sb-1-active","title":"Radial Eng SB-1 Active","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThe Radial SB-1 Acoustic is a high-performance active direct box made for players that are on the move. Made to fit inside a guitar case, the SB-1 is the smallest Radial DI box ever! But don't let the small size deter... this ultra-compact StageBug sounds absolutely terrific!\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThe design begins with standard ¼\" instrument input with a thru-put to feed your tuner or your on-stage amp. The ultra quiet active circuit at once converts the signal from high to low impedance to reduce susceptibility to noise. The signal is then buffered and balanced for long cable runs to the PA system. 48 volt phantom provides the power, so the SB-1 does not require batteries or external supply to make it work. You simply plug in and you are ready to go!\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThe active circuit features a carefully selected 220k-ohm input impedance to eliminate problems with loading while delivering a smooth, warm sound to the audio system. This is particularly important when interfacing vintage guitars with low output pickups when should you plan to do some recording or Reamping. The SB-1 is also equipped with a -15dB pad that reduces the input sensitivity to gracefully handle even the loudest instruments. This makes the SB-1 perfectly well suited for electric bass and keyboards. To reduce feedback, toggling the 180° polarity switch helps eliminate hot spots on stage that can cause low frequency resonance.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThe StageBug... small size, big heart, huge sound!\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eFeatures\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eActive direct box for acoustic guitar\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eUltra compact to fit in your guitar case\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003ePlug \u0026amp; play easy to use feature set\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e48V phantom powered, no batteries needed!\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025696811,"sku":"RAD-R800 0110","price":69.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/sb1_side_new__39637.1682435669.1280.1280.jpg?v=1775683569"},{"product_id":"radial-eng-sb-2-passive","title":"Radial Eng SB-2 Passive","description":"\u003ch1\u003eStageBug™ SB-2 Passive Direct Box\u003c\/h1\u003e\r\n\r\n\u003cli\u003ePassive DI for bass, acoustic and keyboard\u003c\/li\u003e\r\n\u003cli\u003eUltra compact to fit in your guitar case\u003c\/li\u003e\r\n\u003cli\u003ePlug \u0026amp; play easy to use feature set\u003c\/li\u003e\r\n\u003cli\u003eTransformer isolation eliminates noise\u003c\/li\u003e\r\n\u003cbr\u003e\r\n\u003cp\u003eThe Radial StageBug SB-2 Passive is a high-performance direct box made for players who are on the move! Made to fit inside of a guitar case, the SB-2 is ultra compact yet is feature-packed to ensure great performance on any stage.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe compact design begins with a ¼\" input and thru-put to feed the on-stage amp. This connects to the custom made Eclipse ET-DB3 transformer which performs the impedance matching and balances the signal. When using extra high output instruments, a -15dB pad can be inserted into the signal path. This enables the SB-2 to be used with active basses and digital pianos that often tend to overload the input side of the interface. An innovative stereo-to-mono merge function provides a convenient way to connect stereo keyboards and computers without having to reset the source for mono operation, saving time and input channels on the PA. The SB-2 output features an XLR wired to the AES standard with pin-2 hot.\u003c\/p\u003e\r\n\r\n\u003cp\u003eOnce connected, the SB-2 delivers a smooth warm sound reminiscent of older vintage gear. The Eclipse ET-DB3 transformer is magical in its ability to handle extreme signal levels with a natural compression that is pleasing to the ears. The transformer also helps eliminate hum and buzz caused by ground loops by isolating the input from the output. This is augmented with a ground lift switch that lifts pin-1 on the XLR for quiet, professional results.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThese features make the StageBug SB-2 a great choice for electric bass, acoustic guitar and keyboards where small size and big performance matters!\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025729579,"sku":"RAD-R800 0120","price":69.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/stagebug-panels-lrg__40972.1682443249.1280.1280.jpg?v=1775683569"},{"product_id":"radial-eng-sb-4-piezo","title":"Radial Eng SB-4 Piezo","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif; font-size: small;\"\u003eRadial Engineering StageBug SB4 Piezo DI\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThe Radial StageBug SB-4 is a compact active direct box that has been optimized for use with piezo transducers. This enables violin, dobro, mandolin, cello, upright bass and other instruments that are best amplified using a piezo to be connected without compromising the tone or frequency response.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThe design begins with a ¼\" input for the instrument pickup. Unlike typical direct boxes that have a 1meg-ohm input impedance, the SB-4 features a very high 5meg-ohm impedance that smoothes out troublesome peaks that give piezos a bad name. The higher impedance also broadens the frequency response for a more natural and pleasing sound. The active circuit performs the high-to-low impedance conversion and balances the signal to enable long runs upwards to 100 meters without loss, delivering spectacular linearity and low distortion throughout the audio range.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eTo help eliminate feedback on stage, the SB-4 is equipped with a high-pass filter and 180° polarity reverse switch. The high pass filter eliminates excessive bottom end which in turn reduces resonance that can cause the top of the instrument to vibrate. The 180° polarity reverse helps reduce acoustic hot spots on stage by changing the phase relationship between the PA system and room acoustics which can combine at certain frequencies to create peaks. Reversing the polarity eliminates the acoustic peak without resorting to severe equalization which only serves to compromise the natural tone of the instrument. Connections include an AUX out for a stage amplifier plus a standard XLR output to feed the PA. Power is derived from the console's 48V phantom, thus eliminating the need for batteries or external supply. One simply connects, turns on the phantom power and plays!\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThese features combined with the compact size make the StageBug SB-4 the perfect companion for orchestral artists, blue grass players and pop string quartets that need to turn it up when in concert.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv class=\"application-captions\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eUsing the SB-4 on classical guitar\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv class=\"application-captions\"\u003e \u003c\/div\u003e\r\n\u003cdiv class=\"descriptionText\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eConnect your piezo pickup directly to the StageBug SB-4 to get the best tone. No preamp is required! Activate the low-pass filter to eliminate resonance and you are set to go. The SB-4 balances the signal for long runs and smoothes out the peaks for a more natural sounding concert guitar!\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv class=\"descriptionText\"\u003e \u003c\/div\u003e\r\n\u003cdiv class=\"descriptionText\"\u003e\r\n\u003cdiv class=\"application-captions\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eUsing the SB-4 on dobro\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv class=\"application-captions\"\u003e \u003c\/div\u003e\r\n\u003cdiv class=\"descriptionText\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eUse the SB-4 with a piezo on your resonator guitar to capture the unique sound of the body. Connect the AUX out to a stage amp if you like and then send the signal to the PA. The SB-4 will help eliminate the mid range squawk and frequency peaks that often force the sound engineer to turn you down in the mix.\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv class=\"application-captions\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eUsing the SB-4 on upright\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv class=\"descriptionText\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eTraveling with an upright is expensive! So reducing the size of the ancillary equipment is important. The super compact SB-4 connects from the piezo pickup to the PA and you do not need a preamp in between. The SB-4 delivers a deeper bass and more natural top end, greatly improving your tone through the PA.\u003c\/span\u003e\u003c\/div\u003e\r\n\u003ch4 class=\"descriptionText\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eFeatures\u003c\/span\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eActive DI optimized for piezo transducers\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eSmoothes out peaks, eliminates squawk\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eHigh pass filter eliminates resonance\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eUltra compact to fit in your guitar case\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025762347,"sku":"RAD-R800 0140","price":76.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/stagebugsb4-panels-lrg__37615.1682443250.1280.1280.jpg?v=1775683570"},{"product_id":"radial-eng-sb-48-phantom","title":"Radial Eng SB-48 Phantom","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe SB-48 is a phantom power supply that can provide stable 48V power to two condenser microphones or active DI boxes at once, with balanced outputs to feed the inputs of a console or a recording interface. The SB-48 utilizes a non-radiating charge pump circuit to create a stable, ripple-free 48 volt supply for active direct boxes and condenser microphones. It is powered by a single 15VDC 400 mA supply (included), with XLR inputs and outputs for each channel. Simply connect your microphones or direct boxes to the XLR inputs, and feed the outputs to a set of preamps or a PA system. This allows you to use your favorite powered microphone or active DI on stage, even when the venue doesn’t have a reliable phantom power source.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eProvide phantom power for condenser mic’s\u003c\/li\u003e\r\n\u003cli\u003e48V or 12V power for specialty microphones\u003c\/li\u003e\r\n\u003cli\u003eDual XLR inputs and outputs\u003c\/li\u003e\r\n\u003cli\u003ePowered via external 15V power supply\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025795115,"sku":"RAD-R800 0148","price":127.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/sb-48-34-right-768x715__56291.1682443251.1280.1280.jpg?v=1775683570"},{"product_id":"radial-eng-sb-5-laptop","title":"Radial Eng SB-5 Laptop","description":"\u003ch1\u003eStageBug™ SB-5 Laptop DI\u003c\/h1\u003e\r\n\r\n\u003cli\u003eStereo direct box for laptop computer\u003c\/li\u003e\r\n\u003cli\u003eIntegral 1.5m cable with sidewinder cleat\u003c\/li\u003e\r\n\u003cli\u003eTransformer isolation eliminates noise\u003c\/li\u003e\r\n\u003cli\u003ePlug \u0026amp; play easy to use – no power required\u003c\/li\u003e\r\n\u003cbr\u003e\r\n\u003cp\u003eThe Radial Stage Bug SB-5 is a compact stereo direct box designed to accommodate laptop computers, tablets and other consumer audio products when amplifying the signal through a PA system.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe passive design begins with an integrated input cable that connects from the headphone out via a flexible 1.5m (5') cable that is terminated with a standard 3.5mm (1\/8\") stereo connector. The cable is secured via a clamping strain relief and is wrapped using the sidewinder cleat for easy storage. This of course eliminates having to locate a cable making it easier to deploy in fast paced work environments. Inside, the unbalanced stereo signal is sent to a pair of custom wound transformers which balances the signals for long cable runs - upwards to 100 meters (300'), without noise. Transformers further benefit by isolating the computer from the PA system to help eliminate hum and buzz caused by ground loops. This is augmented with a ground lift switch to further reduce ground contamination.\u003c\/p\u003e\r\n\r\n\u003cp\u003eA choice of output connectors is available including a stereo set of ¼\" TRS jacks for full stereo operation or an XLR out that automatically sums the left-right program material to mono. This can save valuable channels on the PA system and makes setup easier in situations where full stereo reproduction is not required. A -15dB input pad may be engaged to reduce sensitivity and enable extra high output sources to be connected without distortion.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThese features combine to make the SB-5 the perfect tool-kit DI for the AV technician, media manager or traveling musician equipped with a computer.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025827883,"sku":"RAD-R800 0150","price":91.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/stagebug-sb5-laptop-34-lrg__60361.1684753326.1280.1280.jpg?v=1775688788"},{"product_id":"radial-eng-sb-5-bracket","title":"Radial Eng SB-5 Bracket","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eDesk Mount L-bracket is available for permanent installations where the SB-5 may need to be affixed to a desk top, podium, AV cart or inside a 19” rack.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025860651,"sku":"RAD-R800 0150 90","price":24.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/r800_0150_90__49432.1682443252.1280.1280.jpg?v=1775683570"},{"product_id":"radial-eng-sb-5w-wall-di","title":"Radial Eng SB-5W Wall DI","description":"\u003ch2\u003eStageBug™ SB5W Wall-mounted stereo direct box\u003c\/h2\u003e\r\n\r\n\u003cli\u003eEasy to use control panel\u003c\/li\u003e\r\n\u003cli\u003ePassive design, no power needed\u003c\/li\u003e\r\n\u003cli\u003eContractor friendly screw terminals\u003c\/li\u003e\r\n\u003cli\u003eTransformer isolated eliminates noise\u003c\/li\u003e\r\n\u003cbr\u003e\r\n\u003cp\u003eThe Radial SB5W is a stereo direct box made to fit in a standard single-gang electrical wall plate. This provides the AV integrator with a simple, yet effective means of connecting an unbalanced analog audio source such as the headphone output from a laptop computer, iPhone, tablet or line level source such as a CD player to a balanced audio system via a permanently mounted interface.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe design begins with all-steel construction for maximum durability and a fully shielded back box to help eliminate pollution from electromagnetic fields caused by dimmers, ballasts, power cables and transformers. Front panel 3.5mm TRS and RCA connectors provide a standard interface for any stereo source and a fully variable level control makes volume adjustments easy. Inside, the SB5W employs two great sounding transformers to convert the high impedance signal to a balanced low impedance capable of driving cables upwards to 100 meters (300') without noise. Transformers further benefit by eliminating hum and buzz caused by so-called ground loops and stray DC voltages that are common when interfacing consumer grade audio devices with professional audio systems. This is augmented with a set \u0026amp; forget ground lift switch. Should channel count be a problem, a recessed mono switch passively sums the stereo signal to a single output. The outputs feature screw terminals with tie-down points for tie-wraps to make installation fast, efficient and permanent.\u003c\/p\u003e\r\n\r\n\u003cp\u003eFinished in a durable black powder coat and sized to fit a standard Decora wall plate, the Radial SB5W looks sharp with any color faceplate while providing clear labeling for easy manipulation for the pros and novices alike.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Radial SB5W Wall plate DI... a world-class connectivity solution by Radial.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025893419,"sku":"RAD-R800 0155","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/stagebugsb5w-34-lrg__47163.1682443253.1280.1280.jpg?v=1775683571"},{"product_id":"radial-eng-sb-6-isolator","title":"Radial Eng SB-6 Isolator","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003ePassive Stereo Line Isolator\u003cbr\u003eThe StageBug SB-6 is a  two-channel passive audio isolator designed to accommodate both balanced and unbalanced signals and effectively eliminate noise when used with instruments, consumer electronics, or professional line-level devices.\u003cbr\u003ePhotos\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIsolator for balanced and unbalanced signals\u003c\/li\u003e\r\n\u003cli\u003eEliminates hum and buzz caused by ground loops\u003c\/li\u003e\r\n\u003cli\u003eExceptionally linear from 20Hz to 20kHz\u003c\/li\u003e\r\n\u003cli\u003eAutomatically configures for hi-Z or lo-Z signal chains\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eProblem solver for stereo systems\u003c\/strong\u003e\u003cbr\u003eThe SB-6 helps remove noise from two channel audio systems, stereo guitar racks, and pedalboards. Two on-board isolation transformers provide a flat frequency response from 20Hz to 20kHz, while removing hum and buzz from ground loops. Dual ground lift switches help further reduce noise, and a -15dB pad allows you to handle high volume outputs without distortion. When using the SB-6 before a set of powered speakers or guitar amplifiers, a polarity reverse switch corrects frequency cancellation and ensures both speakers play back in phase with one another. The SB-6 is completely passive with no need for power, so it's easy to insert into any system to remove noise quickly.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStageBug SB-6 Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the SB-6 in a stereo setup\u003c\/strong\u003e\u003cbr\u003eIsolate the output from a DJ Mixer to a power amp using the SB-6 to eliminate hum and buzz caused by ground loops. Either ¼\" mono or TRS connectors may be used.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the SB-6 in a pro setup\u003c\/strong\u003e\u003cbr\u003eWhen running multiple speakers, you can often encounter noise due to imperfect power systems and DC offsets. Use the SB-6 to isolate distant loudspeakers to solve the problem.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the SB-6 in a guitar rig\u003c\/strong\u003e\u003cbr\u003eEliminate noise in your guitar setup by isolating the guitar amp from other electronic devices. This SB-6 works great between your pedalboard or with your wireless system.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\n\u003cth\u003eSpecifications\u003c\/th\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive Transformers\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTransformer:\u003c\/td\u003e\r\n\u003ctd\u003eEclipse Custom\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz-20KHz +\/-1db\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;140db\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eGain:\u003c\/td\u003e\r\n\u003ctd\u003e-2dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026lt;0.0008% @ 1kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePhase Deviation:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;5° @ 30Hz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003eVaries with Load\/47K\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e600Ω\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;+25dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eInput pad, 180° polarity reverse, Ground lift\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e1\/4\" TRS\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e1\/4\" TRS\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14 gauge steel chassis \u0026amp; outer shell\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e3.92\" x 2.54\" x 1.7\" (100mm x 65mm x 43mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e0.9 lbs (408 grams)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e8\" x 5\" x 3\" (203mm x 127mm x 76mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e1.0 lbs (453 grams)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025926187,"sku":"RAD-R800 0160","price":116.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/sb-6-34-left-768x649__04511.1682443254.1280.1280.jpg?v=1775683571"},{"product_id":"radial-eng-jdi","title":"Radial Eng JDI","description":"\u003ch1\u003eJDI™ Passive Direct Box\u003c\/h1\u003e\r\n\r\n\u003cli\u003eJensen Transformer equipped passive DI\u003c\/li\u003e\r\n\u003cli\u003eEliminates hum and buzz from ground loops\u003c\/li\u003e\r\n\u003cli\u003eVirtually zero phase \u0026amp; harmonic distortion\u003c\/li\u003e\r\n\u003cli\u003eExceptional signal handling and noise rejection\u003c\/li\u003e\r\n\r\n\u003cp\u003eThe Radial JDI is a passive direct box designed to handle extreme signal levels without distortion of any kind. Unlike an active DI that is limited by the buffering amplifier’s rail voltage, the JDI employs a Jensen audio transformer as the engine. Jensen transformers are legendary in their ability to gracefully handle transients while delivering a smooth, warm sounding Bessel curve, reminiscent of the finest vintage gear. Ruler flat from 10Hz to 40kHz and with virtually zero phase deviation, the JDI delivers the natural, pure sound of the instrument without artifact.\u003c\/p\u003e\r\n\r\nThe 100% passive circuitry inside the JDI is incredibly efficient. The transformer performs both high-to-low impedance conversion and signal balancing at the same time with minimal loading and does so without any power whatsoever. The transformer also introduces a magnetic bridge that passes signal while rejecting stray DC voltage. This makes the JDI particularly adept at eliminating hum and buzz caused by ground loops.\r\n\r\nFeatures include input and throughput ¼” connectors, -15dB input pad, ground lift, and 180º degree polarity reverse to help phase align the instrument with the PA. A secondary circuit is added for direct interfacing with high output devices such as guitar or bass amp loudspeakers plus a unique merge function allows stereo sources such as keyboards to be summed mono, saving valuable input channels.\r\n\r\nBuilt tough to handle the abuse of live touring, the JDI features a 14-gauge steel I-beam inner frame and a unique book-end outer shell. The innovative design eliminates stress on the PCB, reducing opportunity for solder joints to go ‘cold’ while the outer shell creates a protective zone around the switches and connectors. The steel casing resists noise-causing electromagnetic pollution and the transformer’s sensitive inner workings are further protected from magnetic fields with a MuMETAL® can. This ensures the signal transfer is quiet and free from hum.\r\n\r\nThese combined features have made the Radial JDI the most popular passive direct box in professional touring and an excellent choice for instrument interface in the studio!\r\n\r\nThe Radial JDI… the world's finest passive direct box.","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025958955,"sku":"RAD-R800 1010","price":189.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/jdi-panels-lrg__73879.1682435670.1280.1280.jpg?v=1775683572"},{"product_id":"radial-eng-jdi-stereo","title":"Radial Eng JDI Stereo","description":"\u003ch1\u003eJDI™ Stereo Passive Direct Box\u003c\/h1\u003e\r\n\r\n\u003cli\u003eJensen Transformer equipped passive DI\u003c\/li\u003e\r\n\u003cli\u003eEliminates hum and buzz from ground loops\u003c\/li\u003e\r\n\u003cli\u003eVirtually zero phase \u0026amp; harmonic distortion\u003c\/li\u003e\r\n\u003cli\u003eCompact stereo format for twice the performance\u003c\/li\u003e\r\n\u003cbr\u003e\r\n\u003cp\u003eThe Radial JDI Stereo is a passive stereo direct box designed to handle extreme signal levels without distortion of any kind. Unlike an active DI that is limited by the buffering amplifier's rail voltage, the JDI employs a pair of Jensen audio transformers that at once balance the signal and lower the impedance to drive long cables. No power is required. You simply plug in and it works.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe magic comes from the amazing Jensen transformers inside. Jensens are legendary in their ability to gracefully handle transients while delivering a smooth, warm sounding Bessel curve, reminiscent of the finest vintage gear. Ruler flat from 10Hz to 40kHz and with virtually zero phase deviation, the JDI Stereo delivers the natural, pure sound of the instrument without artifact. In addition to converting the unbalanced Hi-Z signal to low, the transformers also serve to isolate the input from the output, essentially filtering out stray DC voltage that can cause noise and lead to so called ground loops. This allows audio to pass while eliminating problems.\u003c\/p\u003e\r\n\r\n\u003cp\u003eFeatures include input and thru-put ¼\" connectors plus a -15dB input pad on each channel. This is supplemented with a ground lift switch that lifts pin-1 on the two XLR outputs to further reduce hum and buzz caused by ground loops. Built tough to handle the abuse of live touring, the JDI Stereo employs a 14-gauge steel I-beam inner frame and a unique book-end outer shell. The innovative design eliminates stress on the PCB, reducing opportunity for solder joints to go 'cold' while the outer shell creates a protective zone around the switches and connectors. The steel enclosure works with the transformer's MuMETAL® cans and internal Faraday shield to protect the sensitive inner workings from powerful magnetic fields such as those generated by stage amplifiers. This ensures the signal transfer is quiet and free from hum.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe original Radial JDI has become the most popular passive direct box in both professional touring and recording studios around the world and there is no question that the JDI Stereo is sure to follow suit. These combined features have made the Radial JDI the most popular passive direct box in professional touring and an excellent choice for instrument interface in the studio!\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Radial JDI… the world's finest passive direct box.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895025991723,"sku":"RAD-R800 1012","price":291.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/jdistereo-panels-lrg__72490.1682435671.1280.1280.jpg?v=1775683572"},{"product_id":"radial-eng-jrak-4","title":"Radial Eng JRAK 4","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eMost Radial direct boxes, splitters, isolators and Reampers may be rack-mounted using either the J-Rak 4™ or the J-Rak 8™. These enable multiple units to be combined and safely stored for touring or used as part of a permanent installation. Mounting the DIs is easy. You simply remove the outer shell and slide the inner frame into one of the racks\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDirect Box\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJDI: Premium Passive DI\u003c\/li\u003e\r\n\u003cli\u003eJDI Stereo: Premium Stereo Passive DI\u003c\/li\u003e\r\n\u003cli\u003eJ48: Premium Active DI\u003c\/li\u003e\r\n\u003cli\u003eJ48 Stereo: Premium Stereo Active DI\u003c\/li\u003e\r\n\u003cli\u003eJ33: Phono Preamp \u0026amp; DI\u003c\/li\u003e\r\n\u003cli\u003eJDX 48: Amplifier Direct Box\u003c\/li\u003e\r\n\u003cli\u003eJPC: Computer Direct Box\u003c\/li\u003e\r\n\u003cli\u003eProAV1: Multimedia Direct Box\u003c\/li\u003e\r\n\u003cli\u003eProAV2: Stereo Multimedia Direct Box\u003c\/li\u003e\r\n\u003cli\u003eProD2: Stereo Passive Direct Box\u003c\/li\u003e\r\n\u003cli\u003ePZ-DI: Orchestral Instrument DI\u003c\/li\u003e\r\n\u003cli\u003eTrim-Two: Passive Stereo Direct Box\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJ+4: Stereo Line Driver\u003c\/li\u003e\r\n\u003cli\u003eJ-Iso: Stereo +4dB to -10dB converter\u003c\/li\u003e\r\n\u003cli\u003eJS2: Microphone Splitter\u003c\/li\u003e\r\n\u003cli\u003eJS3: Microphone Splitter\u003c\/li\u003e\r\n\u003cli\u003eLX-2: Line-Level Splitter \u0026amp; Attenuator\u003c\/li\u003e\r\n\u003cli\u003eLX-3: Line-Level Splitter\u003c\/li\u003e\r\n\u003cli\u003ePro-Iso: +4dB to -10dB Converter\u003c\/li\u003e\r\n\u003cli\u003eProMS2: Microphone Splitter\u003c\/li\u003e\r\n\u003cli\u003eRelay Xo: Active Output Switcher\u003c\/li\u003e\r\n\u003cli\u003eTwin-Iso: Line Level Isolator\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003ePreamp\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJCR: Studio Reamper\u003c\/li\u003e\r\n\u003cli\u003eX-Amp: Active Reamp\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026024491,"sku":"RAD-R800 1016","price":127.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/j-rak-front-768x133__15248.1682435672.1280.1280.jpg?v=1775683572"},{"product_id":"radial-eng-j-clamp","title":"Radial Eng J-Clamp","description":"\u003ch1\u003eJ-Clamp Part\u003c\/h1\u003e\r\n\r\n\u003cp\u003eThis lets you secure a standard sized Radial box inside a rack or maybe onto a podium and then bolt it down into place. Mounting is easy: simply unscrew the bookend outer shell and slide into place. Secure the Radial device using the book-end cover screws. Then attach the J-Clamp in the desired position. Top panel label zones are designed for wax pencil function identification.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026057259,"sku":"RAD-R800 1017","price":45.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/j-clamp-jdi__79394.1682435674.1280.1280.jpg?v=1775683573"},{"product_id":"radial-eng-jrak-8","title":"Radial Eng JRAK 8","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eMost Radial direct boxes, splitters, isolators and Reampers may be rack-mounted using either the J-Rak 4™ or the J-Rak 8™. These enable multiple units to be combined and safely stored for touring or used as part of a permanent installation. Mounting the DIs is easy. You simply remove the outer shell and slide the inner frame into one of the racks\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDirect Box\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJDI: Premium Passive DI\u003c\/li\u003e\r\n\u003cli\u003eJDI Stereo: Premium Stereo Passive DI\u003c\/li\u003e\r\n\u003cli\u003eJ48: Premium Active DI\u003c\/li\u003e\r\n\u003cli\u003eJ48 Stereo: Premium Stereo Active DI\u003c\/li\u003e\r\n\u003cli\u003eJ33: Phono Preamp \u0026amp; DI\u003c\/li\u003e\r\n\u003cli\u003eJDX 48: Amplifier Direct Box\u003c\/li\u003e\r\n\u003cli\u003eJPC: Computer Direct Box\u003c\/li\u003e\r\n\u003cli\u003eProAV1: Multimedia Direct Box\u003c\/li\u003e\r\n\u003cli\u003eProAV2: Stereo Multimedia Direct Box\u003c\/li\u003e\r\n\u003cli\u003eProD2: Stereo Passive Direct Box\u003c\/li\u003e\r\n\u003cli\u003ePZ-DI: Orchestral Instrument DI\u003c\/li\u003e\r\n\u003cli\u003eTrim-Two: Passive Stereo Direct Box\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJ+4: Stereo Line Driver\u003c\/li\u003e\r\n\u003cli\u003eJ-Iso: Stereo +4dB to -10dB converter\u003c\/li\u003e\r\n\u003cli\u003eJS2: Microphone Splitter\u003c\/li\u003e\r\n\u003cli\u003eJS3: Microphone Splitter\u003c\/li\u003e\r\n\u003cli\u003eLX-2: Line-Level Splitter \u0026amp; Attenuator\u003c\/li\u003e\r\n\u003cli\u003eLX-3: Line-Level Splitter\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003ePreamp\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJCR: Studio Reamper \u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026090027,"sku":"RAD-R800 1018","price":160.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/j-rack-8-front-768x251__12520.1682435674.1280.1280.jpg?v=1775683573"},{"product_id":"radial-eng-duplex","title":"Radial Eng Duplex","description":"\u003ch1\u003eJDI Duplex™ Stereo Direct Box\u003c\/h1\u003e\r\n\r\n\u003cli\u003eStereo direct box for high output sources\u003c\/li\u003e\r\n\u003cli\u003eUltra linear response from 10Hz to 40kHz\u003c\/li\u003e\r\n\u003cli\u003eVirtually zero phase \u0026amp; harmonic distortion\u003c\/li\u003e\r\n\u003cli\u003eEliminates hum and buzz from ground loops\u003c\/li\u003e\r\n\r\n\u003cp\u003eThe Radial JDI Duplex is a full-feature, stereo passive direct box designed to enhance connectivity, reduce noise, and simplify the hectic life of the touring professional, broadcast engineer or AV integrator. It is plug-and-play easy to use while delivering the utmost sonic quality.\u003c\/p\u003e\r\n\r\n\u003cp\u003eLike the Radial JDI, the Duplex employs two high-performance Jensen audio transformers with the same pristine audio signal path that has made the JDI the industry standard. It features exceptional signal handling with virtually zero phase shift or harmonic distortion, while remaining linear across the entire audio spectrum. When driven to extremes, the natural transformer saturation and resulting warm Bessel curve makes the Radial Duplex the perfect choice for smoothing out highly dynamic instruments such as digital pianos and electronic drums that can sound harsh when pushed. Transformer isolation provides the additional benefit of eliminating troublesome ground loops that can cause hum and buzz in the audio system or interfere with video displays.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis 'Swiss Army knife' DI is equipped with ¼\" connectors for instruments, RCA connectors and a 3.5mm TRS for unbalanced -10dB consumer electronics plus XLR inputs for +4dB professional line sources. Radial's innovative book-end design provides protective zones on the front and rear to keep connectors and switches out of harm's way. The 14 gauge I-beam inner frame adds tremendous rigidity to eliminate outside stresses that could torque the PC board and cause premature solder joint and trace failure. The steel outer shell couples with the transformer's MuMETAL® shield to protect against stray magnetic fields from power transformers or lighting systems that could cause interference. Finally, a full-bottom no-slip pad works double-duty by providing both mechanical and electrical isolation. The Radial Duplex delivers outstanding connectivity, superlative audio and quiet dependable performance.\u003c\/p\u003e\r\n\r\n\u003cp\u003eJDI Duplex… the world's finest passive stereo direct box.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026122795,"sku":"RAD-R800 1020","price":350.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/jdiduplex-panels-lrg__04394.1682435675.1280.1280.jpg?v=1775683574"},{"product_id":"radial-eng-js2","title":"Radial Eng JS2","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003ePassive 2-way Microphone Splitter\u003c\/strong\u003e\u003cbr\u003eThe JS2™ is a high performance balanced mic-level splitter designed to send a signal to multiple destinations simultaneously, with one transformer-isolated output and two direct outputs.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSend one microphone signal to three destinations simultaneously\u003c\/li\u003e\r\n\u003cli\u003eJensen transformer-equipped for exceptional audio quality\u003c\/li\u003e\r\n\u003cli\u003eEliminates hum and buzz caused by ground loops\u003c\/li\u003e\r\n\u003cli\u003eSingle isolated output provides optimal noise rejection\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003ePortable mic splitting on stage or in the studio\u003c\/strong\u003e\u003cbr\u003eThe JS2 is a professional mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A premium Jensen transformer inside provides galvanic isolation to eliminate buzz and hum from ground loops, while maintaining an extremely wide bandwidth with ultra-low distortion and phase shift. Ground lifts on the outputs help further reduce noise, while an input pad allows line-level sources to connected as well. Both the JS2 and the JS3 can be rack mounted for touring and installation purposes, with up to eight fitting in the Radial J-Rak.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJS2 Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the JS2 for a 2-way split\u003c\/strong\u003e\u003cbr\u003eThe Radial JS2 is the perfect interface for splitting a microphone to feed more than one mixer at the same time. 100% isolation eliminates potential ground loops between the two consoles for quiet performance. The main output provides a 48V phantom power return path to the mic.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the JS2 to compare two mic preamps\u003c\/strong\u003e\u003cbr\u003eIn the studio, it is often advantageous to compare the sound of two mic preamps on a particular voice. The JS2 is ideally suited for this as it will not color the sound of the mic or add distortion. The plug \u0026amp; play simplicity makes set up quick.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive mic\/line splitter, transformer based\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTransformer:\u003c\/td\u003e\r\n\u003ctd\u003eJT-MB-CPC, 1:1 ratio\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNumber of channels:\u003c\/td\u003e\r\n\u003ctd\u003eThree-way splitter (one in\/three out)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz ~ 20KHz (+0dB\/ -2dB)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e140dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.0005% @ 1kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePhase Deviation:\u003c\/td\u003e\r\n\u003ctd\u003e0.7° @ 100Hz; 2.8° @ 20Hz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e2.4k Ohms, unbalanced\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e150 Ohms, balanced\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+25dBu @ 1kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eInput pad, Ground lift\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR-F in\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eIsolated output\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14-gauge steel chassis \u0026amp; outer shell\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e3.3\" x 5.0\" x 2\" (84 x 127 x 48mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e1.55lb (0.7kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e4\" x 3\" x 6.5\" (102 x 76 x 165mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e1.92lb (0.87kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026155563,"sku":"RAD-R800 1022","price":207.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/js2-34-right-1-768x806__05116.1682435677.1280.1280.jpg?v=1775683574"},{"product_id":"radial-eng-js3","title":"Radial Eng JS3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003ePassive 3-way Microphone Splitter\u003c\/strong\u003e\u003cbr\u003eThe JS3™ is a high performance balanced mic-level splitter designed to send a signal to multiple destinations simultaneously, with two transformer-isolated outputs and one direct output.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSend one microphone signal to three destinations simultaneously\u003c\/li\u003e\r\n\u003cli\u003eJensen transformer-equipped for exceptional audio quality\u003c\/li\u003e\r\n\u003cli\u003eEliminates hum and buzz caused by ground loops\u003c\/li\u003e\r\n\u003cli\u003eDual isolated outputs provide optimal noise rejection\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003ePortable mic splitting on stage or in the studio\u003c\/strong\u003e\u003cbr\u003eThe JS3 is a professional mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A premium Jensen transformer inside provides galvanic isolation to eliminate buzz and hum from ground loops, while maintaining an extremely wide bandwidth with ultra-low distortion and phase shift. Ground lifts on the outputs help further reduce noise, while an input pad allows line-level sources to connected as well. Both the JS2 and the JS3 can be rack mounted for touring and installation purposes, with up to eight fitting in the Radial J-Rak.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJS3 Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the JS3 to feed three mixers\u003c\/strong\u003e\u003cbr\u003eSometimes, you need to feed the main mixer, stage monitors and a recorder at the same time. The JS3 makes hook-up easy with XLR input, direct out and two isolated outputs. These eliminate ground loops when connecting multiple mixers at the same time.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive mic\/line splitter, transformer based\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTransformer:\u003c\/td\u003e\r\n\u003ctd\u003eJT-MB-DPC, 1:1:1 ratio\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNumber of channels:\u003c\/td\u003e\r\n\u003ctd\u003eThree-way splitter (one in\/three out)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz ~ 20KHz (+0dB\/ -2dB)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e140dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.0005% @ 1kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePhase Deviation:\u003c\/td\u003e\r\n\u003ctd\u003e0.7° @ 100Hz; 2.8° @ 20Hz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e2.4k Ohms, unbalanced\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e2.4k Ohms, unbalanced\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+25dBu @ 1kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eInput pad, Ground lift\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR-F in\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eTwo isolated outputs\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14-gauge steel chassis \u0026amp; outer shell\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e3.3\" x 5.0\" x 2\" (84 x 127 x 48mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e1.55lb (0.7kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e4\" x 3\" x 6.5\" (102 x 76 x 165mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e1.92lb (0.87kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026221099,"sku":"RAD-R800 1023","price":247.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/js3-34-right-768x806__64097.1682443255.1280.1280.jpg?v=1775683574"},{"product_id":"radial-eng-twin-iso","title":"Radial Eng Twin-Iso","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003eTwo Channel Line Level Isolator\u003c\/strong\u003e\u003cbr\u003eThe Twin-Iso™ is a high performance two channel balanced line-level isolator that provides transformer-based isolation between various pieces of pro audio equipment to eliminate hum and buzz caused by ground loops.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eStereo isolator withstands up to +21dB cleanly\u003c\/li\u003e\r\n\u003cli\u003eEliminates hum and buzz caused by ground loops\u003c\/li\u003e\r\n\u003cli\u003eTransparent operation won’t color audio signal\u003c\/li\u003e\r\n\u003cli\u003eJensen transformers provide exceptionally linear response\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eGround loop eliminator\u003c\/strong\u003e\u003cbr\u003eThe Twin-Iso provides a simple and professional way to remove hum and buzz from ground loops by inserting it between any two pieces of balanced audio equipment. It comes equipped with two premium Jensen transformers that deliver exceptional frequency response from 20Hz to 20kHz, with low distortion and the ability to handle high signal levels without saturation - ensuring that the signal integrity of your audio is always maintained. Connect the Twin-Iso between any line-level audio devices, including consoles, amp racks, remote towers, and recorders, and remove ground loops in an instant.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTwin-Iso Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the Twin-Iso to isolate two mixers\u003c\/strong\u003e\u003cbr\u003eIsolating two mixers is common practice in live touring as it allows the opening act to set their mix and feed it into the main act's console. By isolating the two, you eliminate the potential for ground hum and buzz caused by ground loops.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the Twin-Iso on the amp rack\u003c\/strong\u003e\u003cbr\u003eA common problem is the noise encountered when connecting two pieces of gear that may be powered on a different audio circuit. The Twin-Iso easily solves the problem by isolating the input from the output of the other device.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the Twin-Iso to eliminate noise\u003c\/strong\u003e\u003cbr\u003eIn the studio, you can sometimes come across old vintage gear that may sound great, but due to less than ideal grounding, may introduce noise. The Radial Twin-Iso is equipped with ground loops and 100% isolation to eliminate these types of problems.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive line-level isolation, transformer based\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTransformer:\u003c\/td\u003e\r\n\u003ctd\u003eJensen Transformer\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNumber of channels:\u003c\/td\u003e\r\n\u003ctd\u003eStereo (dual mono)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e10Hz ~ 50KHz (± 1dB)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e135dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.001% @ 1kHz, +4dBu output\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePhase Deviation:\u003c\/td\u003e\r\n\u003ctd\u003e0.5° @ 100Hz; 37° @ 20Hz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e600Ω, balanced\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e600Ω, balanced\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+21dBu @ 1kHz, 1% THD+N\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eGround lift\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e2 XLR-F inputs\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e2 XLR-M outputs\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026253867,"sku":"RAD-R800 1024","price":247.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/twin-iso-output-768x589__71236.1682443256.1280.1280.jpg?v=1775683575"},{"product_id":"radial-eng-j-iso","title":"Radial Eng J-Iso","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003eStereo +4dB to -10dB converters and isolator\u003c\/strong\u003e\u003cbr\u003eThe Radial J-Iso™ and Pro-Iso™ are stereo line isolators designed to convert a professional +4dB line level balanced signal to an unbalanced -10dB consumer level device. This enables you to take the balanced output of a mixer and feed a consumer level recorder or audio input on a computer.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eConverts balanced line level signals to unbalanced\u003c\/li\u003e\r\n\u003cli\u003eStereo signal path with set \u0026amp; forget level control\u003c\/li\u003e\r\n\u003cli\u003eTransformer isolated to eliminate hum \u0026amp; buzz\u003c\/li\u003e\r\n\u003cli\u003eFeatures Jensen transformers for optimal signal path\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eExceptional signal handling\u003c\/strong\u003e\u003cbr\u003eThe passive design begins with 100% discrete components throughout. A set \u0026amp; forget level control lets you attenuate the input signal to prevent it from overloading the destination device. Output connections include a stereo pair of ¼\" connectors, a set of RCAs and a mini 3.5mm (1\/8\") for interfacing to a mini recorder or lap-top computer. Transformer isolation helps eliminate hum and buzz caused by ground loops while eliminating stray DC currents from flowing. Construction begins with 14 gauge steel throughout utilizing Radial's unique bookend construction. This creates a protective zone around the connectors and controls for added durability. The steel construction also assists by shielding the transformers from outside magnetic fields. Inside, the J-Iso features an innovative I-beam skeletal insert that makes it virtually impossible to torque the PC board. This reduces potential stress which could cause premature solder joint failure.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJ-Iso Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the J-Iso to record a performance\u003c\/strong\u003e\u003cbr\u003eOften, the available output on a professional console is balanced +4dB. This makes it difficult to feed a portable recorder. The J-Iso comes to the rescue with a simple interface and all of the connectivity you need.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the J-Iso to convert a balanced signal\u003c\/strong\u003e\u003cbr\u003eThe J-Iso makes it easy to convert the balanced line level output from a preamp to a CD player or other consumer device. Transformer isolation further benefits by eliminating hum and buzz caused by ground loops.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the J-Iso to feed a computer\u003c\/strong\u003e\u003cbr\u003eComputers are noisy at the best of times! The Radial J-Iso's premium Jensen transformers help eliminate buzz and hum while delivering exceptional audio. Adjust the set \u0026amp; forget level control on the J-Iso to set signal level.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, transformer based\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTransformer:\u003c\/td\u003e\r\n\u003ctd\u003eJensen JT-11-YMPC\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNumber of channels:\u003c\/td\u003e\r\n\u003ctd\u003eStereo (dual mono)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz ~ 20KHz (+0dB\/ -1.5dB)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e130dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.001% @ 1kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePhase Deviation:\u003c\/td\u003e\r\n\u003ctd\u003e0.5° @ 100Hz; 1° @ 20Hz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e1.3k Ohms, balanced\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e200 Ohms, unbalanced (when output control is set to max)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCommon Mode Rejection Ratio:\u003c\/td\u003e\r\n\u003ctd\u003e-58dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+20dBu @ 1kHz\/1% THD+N\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eGround lift, Level Control\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e1\/4\", RCA and 3.5mm TRS unbalanced\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14 gauge steel chassis\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e8.4cm x 12.7cm x 4.8cm (3.3\" x 5\" x 2\")\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e0.7 kg (1.55 lbs)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e10.2cm x 7.6cm x 16.5cm (4\" x 3\" x 6.5\")\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e0.87 kg (1.92 lbs)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026286635,"sku":"RAD-R800 1025","price":247.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/jiso-34-right-768x801__33311.1682443258.1280.1280.jpg?v=1775683575"},{"product_id":"radial-eng-jpc","title":"Radial Eng JPC","description":"\u003ch1\u003eJPC™ Computer Direct Box\u003c\/h1\u003e\r\n\r\n\u003cli\u003eEasy to use stereo interface for laptop computers\u003c\/li\u003e\r\n\u003cli\u003eActive signal path with transformer isolation\u003c\/li\u003e\r\n\u003cli\u003eEliminates hum and buzz common to PCs\u003c\/li\u003e\r\n\u003cli\u003eFull connector options set for easy interface\u003c\/li\u003e\r\n\u003cbr\u003e\r\n\r\n\u003cp\u003eThe Radial JPC is an analogue stereo interface designed to help solve the buzz and hum problems commonly associated with connecting a computer to an audio system. This is accomplished by combining active buffers and transformer isolation to create an effective 'hybrid' circuit.\u003c\/p\u003e\r\n\r\n\u003cp\u003eIntended for professional field use, the JPC comes fully loaded with choice of ¼\", RCA and 3.5mm input connectors that make it easy to interface with all types of unbalanced audio sources such as computers, iPods, and CD players. It is equipped with isolation transformers to eliminate hum and buzz caused by ground loops and to further reduce system noise; while AC blocking capacitors in the active circuit prevent pollution from the audio system from bleeding back into the computer. Outputs are XLR balanced mic level for easy interface to snake systems and PAs. Powering the JPC is accomplished via 48V phantom from a mixing console. This enables the JPC to be used in concert environments without requiring an external power supply.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe JPC is a great sounding stereo direct box that is plug-and-play easy to use with practically any consumer electronic device. The noise eliminating advantages makes the JPC a must-have problem solver for any technician's audio kit.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Radial JPC... an effective tool designed to make interfacing gear easy.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026319403,"sku":"RAD-R800 1026","price":189.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/jpc-panels-lrg__43041.1682443259.1280.1280.jpg?v=1775683576"},{"product_id":"radial-eng-x-amp","title":"Radial Eng X-Amp","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003eActive Reamp\u003c\/strong\u003e\u003cbr\u003eThe Radial X-Amp™ is an active Reamper™ that allows the engineer to play a pre-recorded track back through guitar amplifiers and pedals. This opens the door to explore new musical sounds and spur on the creative process so that your recording stands out.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eActive Reamp® with two outputs\u003c\/li\u003e\r\n\u003cli\u003e100% discrete class-A signal path\u003c\/li\u003e\r\n\u003cli\u003eTransformer isolated to eliminate noise\u003c\/li\u003e\r\n\u003cli\u003eLED peak indicator and level control\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eReamp for professionals\u003c\/strong\u003e\u003cbr\u003eFollowing the critically acclaimed Radial JD7™ Injector, the X-Amp employs a unique class-A circuit design that has been optimized for use with guitars. Features include balanced line level input with LED peak indicator and level control, class-A circuit topology for optimal reach and frequency response, a transformer isolated output to eliminate hum and buzz caused by ground loops, a 180° polarity reverse switch to bring both amps into phase, and a dual ground lift switch for noise-free operation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eX-Amp Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReamping Step-1\u003c\/strong\u003e\u003cbr\u003eTo Reamp, start by recording a dry track using a Radial J48 and splitting the signal. Record the wet track using a mic so that the guitarist can hear it. Send him to the beach!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReamping Step-2\u003c\/strong\u003e\u003cbr\u003eSend the dry track back to the guitar amps and pedals using the X-Amp. Adjust the tone and move the mics around till it sounds right. You can always come back and Reamp later.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReamping – Not just for guitars!\u003c\/strong\u003e\u003cbr\u003eTry sending a vocal track into a Marshall® amp or a Tonebone Classic-V9™ to add tube warmth and grit. Take it a step further by sending your kick drum to a wah pedal. There are no limits!\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003e100% discrete class-A\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz ~ 15kHz (± 1.0dB)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e119dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.02% @ -15dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eIntermodulation Distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.02% @ -20dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e600Ω\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNoise:\u003c\/td\u003e\r\n\u003ctd\u003eOUT-1 -110dB; OUT-2 -108dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+22dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003e180° polarity reverse, Ground lift, Level Control\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e1\/4\" Isolated and Direct\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14 gauge steel chassis \u0026amp; outer shell\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e3.3\" x 5.0\" x 2\" (84 x 127 x 48mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e1.55lb (720g)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e5\" x 2.75\" x 10.75\" (127 x 70 x 273mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e2.6lb (1.18kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003e+15VDC\/400mA adapter included\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026384939,"sku":"RAD-R800 1028","price":189.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/xamp-input-768x582__00160.1682443260.1280.1280.jpg?v=1775683576"},{"product_id":"radial-eng-reamp-jcr","title":"Radial Eng Reamp JCR","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003eOriginal Reamp Circuit\u003c\/strong\u003e\u003cbr\u003eThe Reamp® JCR is a high-performance passive Reamper that gives you the ability to take a pre-recorded track and send it through a guitar amp or pedal chain, allowing you to explore new sonic textures and experiment with microphone placement, amp and pedal settings without limit. The JCR utilizes the original Reamp circuit designed by recording industry legend John Cuniberti, providing exceptional audio quality that preserves every detail of the original recording while optimizing it to feed amplifiers and effects pedals.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLets you re-record tracks through a guitar or bass amp\u003c\/li\u003e\r\n\u003cli\u003eOriginal Reamp® circuit designed by John Cuniberti\u003c\/li\u003e\r\n\u003cli\u003ePlug and play easy to use passive design\u003c\/li\u003e\r\n\u003cli\u003eImproves productivity while expanding creative options\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003ePlay now, perfect later\u003c\/strong\u003e\u003cbr\u003eThe Radial Reamp JCR is the latest version of the original Reamp that was designed and patented by John Cuniberti. It features a 100% passive design with John's original custom wound 'Made in the USA' transformer and circuit. The latest Radial version features separate XLR and ¼\" TRS input connectors, variable output level plus a three-position filter that lets you tame excessive highs, warm up the lows or simply bypass if you want to revert to the original circuit. An on-board mute function has also been added to allow you to shut off the signal going to the amps when making adjustments or moving mics around the studio.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJCR Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReamping Part 1\u003c\/strong\u003e\u003cbr\u003eReamping usually starts by recording a dry clean track. The Radial J48 is an excellent choice for this as it presents the guitar with an ideal impedance for natural tone.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReamping Part 2\u003c\/strong\u003e\u003cbr\u003eOnce the dry track is recorded, send it back to the Reamp JCR where it can feed a guitar or bass amplifier. Mic the amp to capture the new tone. Move the mic around to find the sweet spot.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdding Pedals\u003c\/strong\u003e\u003cbr\u003eTake things one step further by introducing effects pedals into the mix. Try a wah pedal on kick drum; envelope on snare; distortion on a vocal track. Let your imagination run free!\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, transformer isolated\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz ~ 20kHz (+0dB\/-1dB)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e140dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.001% @ 1kHz\/0dBu input\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eIntermodulation Distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.0025% @ 1kHz\/-10dB input\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePhase Deviation:\u003c\/td\u003e\r\n\u003ctd\u003e2º @ 100Hz; 0º @ 800Hz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e1800 Ohms\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e4.8k Ohms\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCommon Mode Rejection Ratio:\u003c\/td\u003e\r\n\u003ctd\u003e-55dB @ 55Hz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNoise:\u003c\/td\u003e\r\n\u003ctd\u003e-115dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+26dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003e180° polarity reverse, Ground lift, HPF, LPF, Level Control\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e1\/4\" TRS, XLR\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e1\/4\" unbalanced\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14-gauge steel chassis \u0026amp; outer shell\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e3.3\" x 5.0\" x 2\" (84 x 127 x 48mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e1.32lb (600g)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e4\" x 3\" x 6.5\" (102 x 76 x 165mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e1.85lb (840g)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026417707,"sku":"RAD-R800 1030","price":189.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/jcr-34-right-768x747__38133.1682435678.1280.1280.jpg?v=1775683576"},{"product_id":"radial-eng-ice-cube","title":"Radial Eng Ice Cube","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003eBalanced XLR Line Isolator\u003c\/strong\u003e\u003cbr\u003eThe IceCube™ is a balanced line-level isolator designed to quickly eliminate hum and buzz from an audio system by simply inserting it into the signal path.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEliminates hum \u0026amp; buzz caused by ground loops\u003c\/li\u003e\r\n\u003cli\u003eExceptionally linear response from 20Hz to 18kHz\u003c\/li\u003e\r\n\u003cli\u003eCan handle pro output levels without distortion\u003c\/li\u003e\r\n\u003cli\u003ePlug \u0026amp; play easy to use with XLR input \u0026amp; output\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eEliminate ground loops quickly\u003c\/strong\u003e\u003cbr\u003eThe IceCube is an ideal problem solver for today's AV technicians and audio engineers, providing an easy way to insert an isolation transformer into the signal path to remove hum and buzz from ground loops, with a ground lift switch for additional noise reduction. Simply connect it between any two line-level devices, such as a mixer and a powered speaker, or a crossover and a power amp. The IceCube will eliminate ground loop noise without limiting the audio bandwidth or introducing phase shift, and it can handle hot signal levels without distortion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIceCube Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIsolating the DJ mixer from a console\u003c\/strong\u003e\u003cbr\u003ePlug a couple of IceCubes in between the DJ mixer and the main PA to rid the system from hum or buzz caused by ground loops. Standard XLR connections make it easy.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIsolating a crossover from a power amp\u003c\/strong\u003e\u003cbr\u003eEliminating noise problems can take hours of troubleshooting. The IceCube takes the hassle out of the equation with a plug and play solution that works every time.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIsolating a console from a remote tower\u003c\/strong\u003e\u003cbr\u003eWhen distant power systems power equipment it often leads to noise, due to voltage fluctuations and ground contamination. The IceCube isolates the system to reduce noise.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, transformer based\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTransformer:\u003c\/td\u003e\r\n\u003ctd\u003eCustom made Eclipse\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNumber of channels:\u003c\/td\u003e\r\n\u003ctd\u003e1\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz ~ 20KHz (± 1dB)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eGain:\u003c\/td\u003e\r\n\u003ctd\u003e0dB \/ -5.7dB 10K \/ 600 Ω Load\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eClip Level:\u003c\/td\u003e\r\n\u003ctd\u003e25dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026lt;0.0006% 1KHz @ -10dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eIntermodulation Distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.002% @ -10dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e8.66k with 10k load\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e600 Ω nominal\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eEquivalent Input Noise:\u003c\/td\u003e\r\n\u003ctd\u003e110dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e15dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eGround lift\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR Female\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR Male\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e16-gauge steel\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e4.2\" x 1.32\" x 1.6\" (107mm x 34mm x 41mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e0.40lbs (0.18kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e8\" x 5\" x 3\" (203mm x 127mm x 76mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e0.55lbs (0.25kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026450475,"sku":"RAD-R800 1031","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/ice-cube-34-left-768x631__91940.1682435680.1280.1280.jpg?v=1775683577"},{"product_id":"radial-eng-lx2","title":"Radial Eng LX2","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003ePassive Line-Level Splitter \u0026amp; Attenuator\u003c\/strong\u003e\u003cbr\u003eThe LX-2™ is a passive balanced line-level audio splitter that allows you to easily send an audio signal to two different destinations at once without noise, while also providing the ability to attenuate the signal when needed.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSplit one audio signal to two destinations simultaneously\u003c\/li\u003e\r\n\u003cli\u003eJensen® transformer equipped for exceptional audio quality\u003c\/li\u003e\r\n\u003cli\u003eEliminates hum and buzz caused by ground loops\u003c\/li\u003e\r\n\u003cli\u003eVariable trim control can be engaged for easy level adjustment\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eSplit \u0026amp; attenuate audio with ease\u003c\/strong\u003e\u003cbr\u003eThe LX-2 performs the dual functions of splitting a line level audio signal and providing level attenuation where necessary. A premium Jensen transformer inside provides exceptional frequency response and phase coherency to ensure that the highest audio quality is maintained, while isolating the two outputs from each other to eliminate hum and buzz from ground loops. For situations where a level adjustment is required, the trim control on the LX-2 allows you to attenuate overly hot signals. This gives you the ability to drive your mic preamps hard to achieve coloration, while trimming the level at the LX-2 to avoid clipping the inputs of your recording interface. This trim control is activated by a recessed ‘set \u0026amp; forget’ switch; if attenuation is not needed, simply disengage this switch to prevent accidental and unwanted level adjustments.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLX-2 Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSplitting line outputs on stage\u003c\/strong\u003e\u003cbr\u003eSend the output of a mic pre or line level device to a recording interface as well as the PA system\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSplit the output of a mic preamp in the studio\u003c\/strong\u003e\u003cbr\u003eSend the output of a single preamp to two compressors simultaneously. Use the level trim to push your preamp harder for coloration without distorting the compressor inputs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the LX-2 for parallel effects processing\u003c\/strong\u003e\u003cbr\u003eSplit the output of a preamp to feed an outboard effects device while also sending a clean signal to your recording interface. Blend the signals together in your DAW for parallel processing.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, transformer based\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTransformer:\u003c\/td\u003e\r\n\u003ctd\u003eJensen JT-11-FLPCH\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNumber of channels:\u003c\/td\u003e\r\n\u003ctd\u003e1 input, 1 iso output, 1 direct output\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz - 20kHz +\/-0.5dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e140dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eGain:\u003c\/td\u003e\r\n\u003ctd\u003e-1.5dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026lt;0.001% @ 1kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePhase Deviation:\u003c\/td\u003e\r\n\u003ctd\u003e+0.3° @ 20Hz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e716Ω\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e116Ω\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCommon Mode Rejection Ratio:\u003c\/td\u003e\r\n\u003ctd\u003e94dB @ 60Hz, 83dB @3kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNoise:\u003c\/td\u003e\r\n\u003ctd\u003e-119dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+21dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eGround lift, Level Control\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eCombo XLR \/ 1\/4\"\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eisolated XLR, direct XLR\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14-gauge steel\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e84mm x 127mm x 48mm (3.3\" x 5\" x 2\")\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e0.7kg (1.5lbs)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e102mm x 76mm x 165mm (4\" x 3\" x 6.5\")\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e0.87 kg (1.92 lbs)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026483243,"sku":"RAD-R800 1033","price":204.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/lx-2-feature__03479.1682435681.1280.1280.jpg?v=1775683577"},{"product_id":"radial-eng-lx3","title":"Radial Eng LX3","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003ePassive Line-Level Splitter\u003c\/strong\u003e\u003cbr\u003eThe Radial LX-3™ is a high-performance balanced line-level splitter designed to send one audio signal to as many as three destinations at once.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSend one audio signal to three destinations simultaneously\u003c\/li\u003e\r\n\u003cli\u003eJensen transformer-equipped for exceptional audio quality\u003c\/li\u003e\r\n\u003cli\u003eEliminates hum and buzz caused by ground loops\u003c\/li\u003e\r\n\u003cli\u003eCombo jack input for 1\/4″ TRS or XLR sources\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003ePristine audio splitting\u003c\/strong\u003e\u003cbr\u003eThe LX-3 makes use of a premium Jensen transformer to leverage the industry's best combination of frequency response, signal level handling, and low distortion, providing the highest possible signal quality. It features two isolated outputs to eliminate hum and buzz from ground loops, along with a third direct output. All three XLR outputs have ground lift switches for additional noise suppression, and a switchable -12dB input pad allows you to connect even the hottest line outputs without fear of overloading or distortion. The input of the LX-3 is accessed with an XLR\/TRS combo jack, which allows you to connect via balanced or unbalanced cables; the LX-3 will automatically balance the signal at the isolated outputs, preventing interference and signal degradation over long cable runs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLX-3 Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSend one mono signal to multiple headphone mixes\u003c\/strong\u003e\u003cbr\u003eSplit a click track output to three personal monitor mixers on stage\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSplit the output of a mic preamp in the studio\u003c\/strong\u003e\u003cbr\u003eSend the output of a single preamp to three different compressors or effects units, opening the door to numerous creative possibilities.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSplit a mono console feed to multiple devices\u003c\/strong\u003e\u003cbr\u003eSend production audio or a live board feed to up to three different portable recording devices at once.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, transformer based\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTransformer:\u003c\/td\u003e\r\n\u003ctd\u003eJensen JT-123-FLPCH\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNumber of channels:\u003c\/td\u003e\r\n\u003ctd\u003e1 In, 3 Out\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz - 20kHz +\/-0.5dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e140dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eGain:\u003c\/td\u003e\r\n\u003ctd\u003e-1.5dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePhase Deviation:\u003c\/td\u003e\r\n\u003ctd\u003e+0.6° @ 20Hz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e712Ω\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e112Ω\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCommon Mode Rejection Ratio:\u003c\/td\u003e\r\n\u003ctd\u003e105dB @ 60Hz, 70dB @3kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNoise:\u003c\/td\u003e\r\n\u003ctd\u003e-120dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+20dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eInput pad, Ground lift\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eCombo XLR \/ 1\/4\"\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR iso and direct\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14-gauge steel\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e84mm x 127mm x 48mm (3.3\" x 5\" x 2\")\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e0.7kg (1.5lbs)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e102 x 76 x 165mm (4\" x 3\" x 6.5\")\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e0.87 kg (1.92 lbs)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026516011,"sku":"RAD-R800 1034","price":247.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/lx3-input-768x534__24260.1682435682.1280.1280.jpg?v=1775683577"},{"product_id":"radial-eng-sat2","title":"Radial Eng SAT2","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003eStereo Audio Attenuator \u0026amp; Monitor Controller\u003c\/strong\u003e\u003cbr\u003eThe SAT-2™ is a passive stereo audio device that provides you with a transparent level control wherever you may need it, either at the output of a pair of high-gain mic preamps, or between your recording interface and a pair of powered speakers as a compact desktop monitor controller.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLevel control for a pair of powered speakers\u003c\/li\u003e\r\n\u003cli\u003eAttenuates hot signal levels to prevent clipping\u003c\/li\u003e\r\n\u003cli\u003ePassive audio circuit, no power required\u003c\/li\u003e\r\n\u003cli\u003eTransparent operation without signal coloration\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eUltra-quiet monitor controller\u003c\/strong\u003e\u003cbr\u003eWhen using the SAT-2 as a monitor controller, simply connect it in between your playback device and a pair of powered speakers for an easy-access master volume control. Mute and mono switches allow you to silence the outputs or check mixes for mono phase compatibility, while a handy dim switch with adjustable level control allows you to temporarily lower the output volume without losing the main volume setting.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttenuation in the studio\u003c\/strong\u003e\u003cbr\u003eThe SAT-2 can also be used to attenuate signals before sending them to your audio interface, so you can drive your mic preamps hard for coloration without clipping the inputs of the digital audio converter. A high quality 4-pole rotary knob ensures consistent L-R tracking over the entire range of the trim pot, fully maintaining the left-right balance of stereo sources.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSAT-2 Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUse the SAT-2 as a monitor controller\u003c\/strong\u003e\u003cbr\u003eConnect between your audio interface and powered speakers, utilizing the level control as well as the dim and mute switches.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttenuate the output of a hot mic preamp or compressor\u003c\/strong\u003e\u003cbr\u003eUse the trim control on the SAT-2 to avoid overloading or clipping the inputs of your recording device, while retaining the character of your preamps cranked up to their sweet spot.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUse the SAT-2 for parallel effects processing\u003c\/strong\u003e\u003cbr\u003eTake the output of a mic preamp into the SAT-2, engage the mono switch, and connect one of the SAT-2 outputs directly to your recording interface, and the other to an effects device and then to a second recording track. You can then adjust the blend \u003cbr\u003ebetween the two tracks in your DAW.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttenuate stereo outputs for live or broadcast use\u003c\/strong\u003e\u003cbr\u003eUse the SAT-2 to trim down the output of an aux on a mixing console and feed production audio to video cameras or field recorders.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdd a level control to a multi-room PA system\u003c\/strong\u003e\u003cbr\u003eInterface between the aux output of a PA mixer and powered speakers in another room in the venue, providing local volume control for each zone.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive audio signal path\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNumber of channels:\u003c\/td\u003e\r\n\u003ctd\u003e2\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz to 20kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;141dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eGain:\u003c\/td\u003e\r\n\u003ctd\u003e0dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;0.0005% @ 0dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eIntermodulation Distortion:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;0.001% @ 0dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePhase Deviation:\u003c\/td\u003e\r\n\u003ctd\u003e0° @ 20Hz, 0° @ 1kHz, +2° @10kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e8 kΩ\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e1.8 kΩ\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCommon Mode Rejection Ratio:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;80dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNoise:\u003c\/td\u003e\r\n\u003ctd\u003e-115dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;+ 26dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eMono Sum, Level Control\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR, 1\/4\"\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14-gauge steel chassis and outer shell\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e5\" x 3.25\" x 2\" (12.7 x 8.3 x 5cm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e1.5lb (0.68kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e6.4\" x 4.25\" x 3\" (16.3 x 10.8 x 7.6cm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e1.8lb (0.8kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026548779,"sku":"RAD-R800 1035","price":145.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/sat2-34-right-768x525__95869.1682435684.1280.1280.jpg?v=1775683578"},{"product_id":"radial-eng-mix-2-1","title":"Radial Eng MIX 2:1","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003eTwo-channel Audio Combiner \u0026amp; Mixer\u003c\/strong\u003e\u003cbr\u003eThe MIX 2:1™ is a simple yet highly useful mixer that passively sums two audio channels down to one. This enables you to easily sum the stereo outputs of a console, recording interface, or portable playback device down to mono, or to mix any two signals together and balance their relative input levels.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMix two channels to a single mono output\u003c\/li\u003e\r\n\u003cli\u003eIndividual level controls can be bypassed when not in use\u003c\/li\u003e\r\n\u003cli\u003eBalanced 1\/4″ TRS and XLR inputs\u003c\/li\u003e\r\n\u003cli\u003eCompletely passive, no need for power\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCombine two balanced mic or line-level signals\u003c\/strong\u003e\u003cbr\u003eThe MIX 2:1 makes it easy to sum together any two signals, whether it's two microphones on a single guitar amplifier, or the stereo line outputs of a mixing console. At the inputs of the MIX 2:1, both ¼\" TRS and XLR connectors are available, with ground lift switches to eliminate buzz and hum from ground loops and ensure noise-free operation. A trim control is also featured on each input, so if you are connecting two separate mono sources such as the outputs of two mic preamps, they can each be attenuated as needed to match their levels at the output. After both signals are passively summed together, they feed a single XLR output that can be connected to a powered speaker, or the input of a console or recording interface.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMix 2:1 Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMix the output of two mic preamps to a single track\u003c\/strong\u003e\u003cbr\u003eCombine two tracks to a single input on your audio interface. Use the 180° phase flip to ensure phase coherency between the two inputs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSumming a stereo aux to a mono input\u003c\/strong\u003e\u003cbr\u003eEngage the level control bypass to sum both channels at unity gain into the mono input of a powered speaker or a recording device.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSumming a stereo source to a single channel on a console\u003c\/strong\u003e\u003cbr\u003eWhen you’re short on channels, the MIX 2:1 allows you to sum a stereo output down to mono, using only one channel on the console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMix two dynamic microphones together into a single preamp\u003c\/strong\u003e\u003cbr\u003eThe MIX 2:1 works with mic-level signals as well, which is useful when you're low on available input channels, or want to process two mics using the same signal chain. Ensure phantom power is disengaged when connecting the Mix 2:1 to a microphone preamp.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive mixer\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz to 20kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;133dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;0.005% @ 0dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eIntermodulation Distortion:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;0.002% @ 0dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePhase Deviation:\u003c\/td\u003e\r\n\u003ctd\u003e0° @ 20Hz, 0° @ 1kHz, +2° @10kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e8 kΩ\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e1 kΩ\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCommon Mode Rejection Ratio:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;80dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNoise:\u003c\/td\u003e\r\n\u003ctd\u003e-113dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;+ 20dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003e180° polarity reverse, Ground lift, Level Control\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e1\/4\", XLR\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14-gauge steel chassis and outer shell\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e5\" x 3.25\" x 1.85\" (12.7 x 8.3 x 4.7cm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e1.48lb (0.67kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e6.25\" x 4.12\" x 3\" (15.9 x 10.5 x 7.6cm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e1.77lb (0.8kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026581547,"sku":"RAD-R800 1036","price":138.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/mix21-34-right-768x555__52175.1682443256.1280.1280.jpg?v=1775683578"},{"product_id":"radial-eng-reamp-station","title":"Radial Eng Reamp Station","description":"\u003cp\u003e\u003cstrong\u003eReamp® Station\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Reamp® Station combines two studio essentials in one chassis: an active DI box for pristine recordings of any instrument, and the JCR high-performance Reamper to feed those recordings to your guitar amps and pedals during mixdown.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecord high-quality direct tracks using the active DI\u003c\/li\u003e\n\u003cli\u003eReamp® any recorded tracks through pedals and amps\u003c\/li\u003e\n\u003cli\u003eConnect easily with XLR, 1\/4″ TRS, and 3.5mm Reamp® inputs\u003c\/li\u003e\n\u003cli\u003eStreamline your studio recording and mixing workflow\u003c\/li\u003e\n\u003cli\u003eUnlock new creative possibilities for your mixes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecord with confidence\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA great Reamping session starts with a clean, high-quality direct recording -which is why the DI you choose is so important. The active DI portion of the Reamp® Station is based off of Radial's world-class J48, tweaked slightly to provide maximum benefit for recording tracks that can be Reamped later on. Among these changes is a buffer switch, which engages a unity-gain Class-A buffer circuit on the Thru output, preventing any loading down of passive pickups when connected to an amplifier and preserving the natural tone of your instrument. The DI circuit is powered via 48V phantom from your interface or mixer, so there's no need for a separate power supply, and a front panel LED indicator for visual confirmation that power is being received.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReamp® without limits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Reamper side of the Reamp® Station will be familiar to many professional recording engineers and home enthusiasts alike. It takes the circuit from the Reamp® JCR, originally designed by acclaimed engineer John Cuniberti, and ports it into a multi-use studio tool. The JCR features a custom-wound 'Made in the USA' transformer to convert the line-level signals from an audio interface so they are optimized to feed guitar pedals and amplifiers, while also including a level control, 3-position filter, and a mute switch to protect your ears when adjusting mic placement on a live amp. In addition to the XLR and balanced 1\/4\" TRS inputs for the Reamper, a 3.5mm mini input is also included for easy connection to mobile devices such as smartphones and tablets to streamline playback and encourage additional creativity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe complete package\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith a world-class DI box and the JCR Reamper under the hood, the Reamp® Station is the latest must-have piece of gear for studio recording. With this powerful unit next to your amplifier, you can seamlessly switch from recording a performance to Reamping and exploring new creative sounds, while knowing that you'll achieve the highest audio quality during each step. It's also rack mountable using the optional SA Series rack adaptor, and Link In\/Out connections are provided to daisy-chain multiple Reamp® Stations together for larger setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput connections: 1\/4”, XLR, 3.5mm\u003c\/li\u003e\n\u003cli\u003eLED Indicators: 48V phantom (Direct box only)\u003c\/li\u003e\n\u003cli\u003eOutput Connectors: 1\/4”, XLR\u003c\/li\u003e\n\u003cli\u003eMounting Options: SA series rack mount kit available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 48V phantom power (Direct box features only)\u003c\/li\u003e\n\u003cli\u003eConstruction: 14-gauge Steel Chassis \u0026amp; Outer Shell\u003c\/li\u003e\n\u003cli\u003eFinish: Durable Powder Coat\u003c\/li\u003e\n\u003cli\u003eConditions: For use in dry locations only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirect Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudio Circuit Type: Proprietary Active Circuit\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 5Hz to 20kHz (+\/-0.5dB)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: 0.004% @ 1kHz, 0dBu\u003c\/li\u003e\n\u003cli\u003eTHD + Noise: 0.004% @ 1kHz, 0dBu\u003c\/li\u003e\n\u003cli\u003eIntermodulation Distortion: 0.005% @ -10dBV\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio: 94dB\u003c\/li\u003e\n\u003cli\u003eDynamic Range: 100dB\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 220k Ω\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 185 Ω\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eJCR Reamper\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudio Circuit Type: Passive, transformer based\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 0Hz to 20kHz (+\/-0.5dB)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: 0.002% @ 1kHz, +4dBu\u003c\/li\u003e\n\u003cli\u003eTHD + Noise: 0.005% @ 1kHz, +4dBu\u003c\/li\u003e\n\u003cli\u003eIntermodulation Distortion: 0.001% @ 0dBV\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio: 88dB\u003c\/li\u003e\n\u003cli\u003eDynamic Range: 100dB\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 1.4k Ω\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 5.1k Ω\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026614315,"sku":"RAD-R800 1037","price":291.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/RAD-R800_1037-1__17930.1698729861.1280.1280.jpg?v=1775692024"},{"product_id":"radial-eng-reamp-hp","title":"Radial Eng Reamp HP","description":"\u003cp\u003e\u003cstrong\u003eReamp® HP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Reamp® HP takes the signal from a headphone output jack on an audio interface or a mobile device and converts it to feed mono guitar amps and effects pedals for Reamping.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlay prerecorded tracks through amps and pedals\u003c\/li\u003e\n\u003cli\u003eEasily Reamp® from any interface or playback device\u003c\/li\u003e\n\u003cli\u003e1\/4″ and 3.5mm inputs connect to a headphone output jack\u003c\/li\u003e\n\u003cli\u003eTransformer isolated for low-noise recordings\u003c\/li\u003e\n\u003cli\u003eExplore new creative options and improve your mixes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReamping made easy\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Reamp® HP is designed to accept the signal from the headphone output jack on your interface, making it incredibly easy to connect on the fly without having to repatch cables or dig around behind your studio desk or equipment rack. Simply assign the track you want to Reamp® to the right channel of your headphone output and you're ready to feed guitar, bass, or even vocal tracks through your amplifier to record and experiment with new tones and settings. You can even assign stereo tracks to the Reamp® HP and sum them down using the dedicated mono switch on the device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore flexibility = more creativity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Reamp® HP features both 1\/4\" and 3.5mm inputs, so you aren't limited to just Reamping tracks from your audio interface. Connect a smartphone or tablet to the Reamp® HP and create new sounds by combining a sound creation app with your favorite pedals and amps. The Reamp® HP is equipped with an isolation transformer and a ground lift switch to eliminate hum and buzz and help produce a clean recording, along with a level control for fine-tuning the output signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMono Sum, Ground lift, Level Control\n\u003cul\u003e\n\u003cli\u003eInput Connectors: ¼\" TRS unbalanced stereo, 3.5mm TRS unbalanced stereo\u003c\/li\u003e\n\u003cli\u003eOutput Connectors: ¼\" TS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstruction: 16 gauge steel chassis and outer shell\u003c\/li\u003e\n\u003cli\u003eSize (L x W x D): 4.6\" x 1.50\" x 1.89\" (117mm x 48mm x 38mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.58 lbs (256g)\u003c\/li\u003e\n\u003cli\u003ePower: Passive, no power required\u003c\/li\u003e\n\u003cli\u003eConditions: For use in dry locations only between 5°C and 40°C\u003c\/li\u003e\n\u003cli\u003eAudio circuit type: Passive, transformer isolated\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20Hz ~ 20KHz (+\/- 0.5dB)\u003c\/li\u003e\n\u003cli\u003eDynamic range: \u0026gt;96dB\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion: 0.0015% @1kHz\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 11.8kΩ\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 1.5kΩ\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: -105dBu\u003c\/li\u003e\n\u003cli\u003eNoise: -125dBu\u003c\/li\u003e\n\u003cli\u003eMaximum Input: \u0026gt;+20dBu\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026647083,"sku":"RAD-R800 1038","price":76.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/RAD-R800_1038-1__89358.1698729773.1280.1280.jpg?v=1775692024"},{"product_id":"radial-eng-usb-pro","title":"Radial Eng USB-Pro","description":"\u003ch1\u003eUSB-Pro™ Stereo USB Laptop DI\u003c\/h1\u003e\r\n\r\n\u003cli\u003eHigh performance 24bit digital audio converter\u003c\/li\u003e\r\n\u003cli\u003eReady to use without the need of a driver\u003c\/li\u003e\r\n\u003cli\u003e3.5mm analog headphone output to check signal\u003c\/li\u003e\r\n\u003cli\u003eBalanced Lo-Z outputs with switchable isolation\u003c\/li\u003e\r\n\u003cbr\u003e\r\n\r\n\u003cp\u003eThe Radial USB-Pro is a high-resolution stereo digital audio converter (DAC) and direct box that is designed to connect to any computer system to seamlessly transfer digital audio to analog. A stereo pair of balanced XLR audio outputs with adjustable level control then feeds the signal to a microphone preamplifier, PA system, mixing console or even a powered speaker! Made for plug and play simplicity, the USB-Pro will automatically be listed as an available sound card in the audio settings in all popular operating systems including Windows XP, Windows 7\/8\/10, and Mac OSX.\u003c\/p\u003e\r\n\r\n\u003cp\u003eConnection to a computer is accomplished through a standard USB type-B port. Digital-to-analog conversion can be monitored on headphones through the 3.5mm analog output to check signal quality and level before connecting to a sound system. A mono-sum switch may be engaged to check for phasing or for connection to a mono system. Should hum or buzz caused by ground loops be encountered, two recessed side-access switches allow the user to insert isolation transformers into the signal path. To further reduce susceptibility to noise, this is augmented with a ground lift switch that lifts pin-1 on both XLR jacks.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAs with all Radial products, the USB-Pro is designed to handle the rigors of professional touring. Our unique book-end design creates protective zones around the switches, connectors and controls to keep them out of harm's way. Inside, our time-tested I-beam construction assures the sensitive internal PC board will not torque, which could cause premature part failure. Finally, a full bottom no-slip pad provides mechanical isolation and electrical insulation to ensure quiet operation.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026679851,"sku":"RAD-R800 1050","price":211.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/usb-pro-panels-lrg__36471.1682443257.1280.1280.jpg?v=1775683579"},{"product_id":"radial-eng-bt-pro-v2","title":"Radial Eng BT-Pro V2","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStereo Bluetooth Direct Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe BT-Pro V2 is a Bluetooth-enabled direct box that connects wirelessly to smartphones, tablets, and other mobile devices and provides a pair of balanced analog audio outputs to feed a PA system. Each BT-Pro V2 has a unique identifier, allowing multiple units to be used within the same building. The latest model of the BT-Pro can also be powered via 48V phantom from a mixing console.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWirelessly connect smartphones and tablets to a mixer\u003c\/li\u003e\n\u003cli\u003eBluetooth reception of up to 30 meters (100ft)\u003c\/li\u003e\n\u003cli\u003eDual balanced XLR outputs feed the PA system\u003c\/li\u003e\n\u003cli\u003ePowered via external supply or 48V phantom power\u003c\/li\u003e\n\u003cli\u003eUnique device ID allows multiple BT-Pro’s in a single location\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWireless connection, professional audio\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe BT-Pro V2 makes it easy to quickly connect to any smartphone, tablet, or mobile device for high quality audio playback through a sound system. It wirelessly pairs over Bluetooth, eliminating the need to search for adaptor cables and providing you with the freedom to move around while staying connected. Superior audio quality is provided using the Bluetooth 5.0 protocol, allowing the BT-Pro to be used for playback even in critical listening environments. While the BT-Pro V2 is designed to last with a 14 gauge steel outer shell and high durability connectors and controls, it also has an enhanced reception range thanks to the plastic injection-molded insert, which allows wireless signals to pass through unimpeded. Balanced XLR outputs are provided for connection to pro audio equipment, with a level control to allow for easy volume adjustments, a headphone output for testing purposes, and a mono switch to reduce channel requirements when needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e48V operation \u0026amp; unique device identifiers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor ease of use in live sound applications, the BT-Pro can be powered via 48V phantom from the PA console. This provides the ability to use the included external power supply as a redundant backup, or to eliminate it from the setup altogether. Under 48V phantom power, the BT-Pro provides mic-level signals at the XLR outputs, but when the external power supply is used it is capable of generating line-level signals that can be connected to the line inputs of a PA console and avoid using additional mic-level channels. Each individual BT-Pro V2 also has a unique Bluetooth identifier, allowing multiple units to be successfully used in close proximity to one another. This makes it easy for commercial multi-room facilities to employ a number of BT-Pro units without any confusion when trying to connect to a receiver in a specific part of the building.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBT-Pro V2 Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsing the BT-Pro V2 in a presentation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStanding at a podium, you can easily transmit the audio from your laptop presentation to the BT-Pro to play background music, audio clips or to mate with video. Simply connect directly to the PA speakers for amazing audio!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsing the BT-Pro V2 with tablet for performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse the BT-Pro V2 on stage to transmit performance or audio files from a laptop or tablet! Simply pair-up the BT-Pro V2 to your computer to freely move around the stage without wires.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWireless connection, professional audio\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe BT-Pro V2 makes it easy to quickly connect your iPhone® to the PA without having to search through drawers looking for wires. The innovative antenna lets you sit the BT-Pro anywhere without interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudio circuit type: Active audio line driver\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20Hz to 20KHz\u003c\/li\u003e\n\u003cli\u003eDynamic range: 90dB\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion: 0.05%\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 150Ω\u003c\/li\u003e\n\u003cli\u003eSignal to Noise: 90dB\u003c\/li\u003e\n\u003cli\u003eBluetooth Compliance: Bluetooth 5.0\u003c\/li\u003e\n\u003cli\u003eData Compression: SBC Codec\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMono Sum, Ground lift, Level Control, Headphone\u003c\/li\u003e\n\u003cli\u003eInput Connectors: Bluetooth 5.0, Device range up to 100'\u003c\/li\u003e\n\u003cli\u003eOutput Connectors: XLR-M, 3.5mm TRS Headphone\u003c\/li\u003e\n\u003cli\u003eExtras: Included power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstruction: 14 gauge steel outer shell, molded nylon insert\u003c\/li\u003e\n\u003cli\u003eFinish: Durable powder coat\u003c\/li\u003e\n\u003cli\u003eSize (L x W x D): 3.3” X 5” X 2” (84 x 127 x 51mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 1.1lbs (500g)\u003c\/li\u003e\n\u003cli\u003ePower: USB-C connector (Power Only) or 48V Phantom\u003c\/li\u003e\n\u003cli\u003eConditions: For use in dry locations only between 5°C and 40°C\u003c\/li\u003e\n\u003cli\u003eWarranty: Radial 3-year, transferable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026712619,"sku":"RAD-R800 1057","price":266.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/BT-Pro-V2-34-Right__26420.1732181900.1280.1280.jpg?v=1775683583"},{"product_id":"radial-eng-dinet-dan-rx","title":"Radial Eng DiNet Dan-RX","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003eCompact Dante network interface\u003c\/strong\u003e\u003cbr\u003eThe Radial DiNET DAN-RX is a 2-channel Dante™ endpoint that allows you to easily output balanced audio from a Dante enabled network.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eStereo analog output device for Dante networks\u003c\/li\u003e\r\n\u003cli\u003eBalanced XLR outputs for connection at mic or line level\u003c\/li\u003e\r\n\u003cli\u003eHeadphone amplifier for personal monitoring\u003c\/li\u003e\r\n\u003cli\u003e24bit\/96kHz digital to analog conversion\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eEffortless digital audio distribution\u003c\/strong\u003e\u003cbr\u003eThe DAN-RX provides a simple way to take a stereo feed from a Dante network and convert it to analog audio for monitoring in any location. Balanced XLR outputs allow you to connect to professional audio equipment such as a mixing console, amplifier, or a pair of powered speakers. In addition, a local 3.5mm headphone output is equipped with its own level control to test audio before connection to the PA system or to monitor locally with headphones, making it useful in events that use personal monitor systems. The DAN-RX can be powered from an included external supply or any Power over Ethernet (PoE) network switch, and both of these options can be used simultaneously to provide redundancy for critical applications.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiNET DAN-RX Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the DAN-RX to connect a small PA system\u003c\/strong\u003e\u003cbr\u003eQuickly route a stereo feed to small PA systems in overflow rooms or remote locations within the venue.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the DAN-RX for press distribution\u003c\/strong\u003e\u003cbr\u003ePress recorders are often placed in different rooms away from the live event. The DAN-RX provides an easy way to send audio to these rooms to connect directly to a recorder or to feed a press box when necessary.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the DAN-RX for personal monitoring\u003c\/strong\u003e\u003cbr\u003eThe dedicated headphone output on the DAN-RX allows it to be used as a personal monitoring system. The sound engineer can create a unique mix for musicians, producers or any other event staff that need to monitor a feed in any location on the network.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003eHigh current balanced active output device\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNumber of channels:\u003c\/td\u003e\r\n\u003ctd\u003e2\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz - 20kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;100dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eGain:\u003c\/td\u003e\r\n\u003ctd\u003e8dBu max @ -6dBfs\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.007% @ -6dBfs\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e150Ω\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNoise:\u003c\/td\u003e\r\n\u003ctd\u003e44.1kHz, 48kHz, 88.2kHz, and 96kHz (24 bit)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eHeadphone\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eRJ45 Ethernet\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eExtras:\u003c\/td\u003e\r\n\u003ctd\u003e3.5mm headphone for testing\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14-gauge steel\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e5\" x 3.31\" x 1.88\" (12.7cm x 8.4cm x 4.8cm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e1.45lb (0.66kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e11.75\" x 4.75\" x 3\" (29.8cm x 12.1cm x 7.6cm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e2.1lb (0.95kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003e15VDC 400mA (included) or PoE\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026745387,"sku":"RAD-R800 1063","price":364.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/dan-rx-34-thumb__91567.1682443261.1280.1280.jpg?v=1775683584"},{"product_id":"radial-eng-dinet-dan-tx2","title":"Radial Eng DiNet DAN-TX2","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003eTwo Channels of Analog Audio over Dante\u003c\/strong\u003e\u003cbr\u003eThe DAN-TX2 is a 2-Channel analog-to-digital converter that allows you to connect any line level source to a Dante or AES67-compliant network.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eConnect any line level source to a Dante network\u003c\/li\u003e\r\n\u003cli\u003eXLR, 1\/4″ TRS, RCA and 3.5mm input jacks\u003c\/li\u003e\r\n\u003cli\u003e24bit\/96kHz analog to digital conversion\u003c\/li\u003e\r\n\u003cli\u003eHandles signal levels up to +24dBu\u003c\/li\u003e\r\n\u003cli\u003eCompliant to AES67 specifications\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eSeamless network integration\u003c\/strong\u003e\u003cbr\u003eThe DiNET DAN-TX2 makes it easy to transmit two channels of high quality analog audio over a Dante or AES67-compliant network. Multiple input options are provided, with Balanced XLR\/TRS connectors for professional audio sources, RCA jacks for line level consumer devices, and a 3.5mm aux input for connection to laptops, smartphones, and tablets. Trim controls and pad switches are included for each channel, with a link switch to simplify control for stereo sources. The RJ45 network connection is compatible with Neutrik etherCON connector carriers to prevent accidental disconnection and protect cable terminations, and redundant powering is available for critical applications by using the included external power supply and Power over Ethernet (PoE) simultaneously. The DAN-TX2 can be mounted in 19\" equipment racks with the optional SA series rackmount adaptor kit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiNET DAN-TX2 Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the DAN-TX2 with consumer electronics\u003c\/strong\u003e\u003cbr\u003eConnect CD\/DVD players to the RCA inputs for easy integration with a Dante network. Engage the Link switch when using stereo sources to control both left and right inputs with the level control and pad on Channel 1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the DAN-TX2 with mobile devices\u003c\/strong\u003e\u003cbr\u003eA 3.5mm stereo Aux input allows you to easily connects laptops, smartphones and tablets to a networked audio system without the need for special software or equipment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the DAN-TX2 for balanced professional audio\u003c\/strong\u003e\u003cbr\u003eThe balanced XLR\/TRS inputs on the DAN-TX2 can handle signal levels up to +24dBu, allowing any balanced analog mixer, recorder or playback source to be quickly connected to a Dante network.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003eHigh current balanced active input device\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNumber of channels:\u003c\/td\u003e\r\n\u003ctd\u003e2\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz-20kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;103dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.008% @ -6dBfs\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eIntermodulation Distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.0017% -10dBfs\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e40kOhm (Balanced); 20kOhm (Unbalanced)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eEquivalent Input Noise:\u003c\/td\u003e\r\n\u003ctd\u003e-98dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNoise:\u003c\/td\u003e\r\n\u003ctd\u003e44.1kHz, 48kHz, 88.2kHz, and 96kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+28dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eInput pad\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e2x XLR\/TRS combo, 3.5mm TRS, 2x RCA\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eRJ45 Ethernet with locking etherCON\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eExtras:\u003c\/td\u003e\r\n\u003ctd\u003eBit Depth: 24 bit; Idle Channel Noise: -108dB; Channel Separation: \u0026gt;85dB; Power Consumption: 1.25W; Power over Ethernet (PoE): Class 1 IEEE 802.3af\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14-gauge steel\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFinish:\u003c\/td\u003e\r\n\u003ctd\u003eDurable powder coat\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e4.5” x 2” x 6” (121 x 6 x 147mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003e15VDC 400mA (included) or PoE\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895026778155,"sku":"RAD-R800 1064","price":423.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/dan-tx2-back-768x385__81442.1682435685.1280.1280.jpg?v=1775683584"},{"product_id":"radial-eng-dinet-dan-rx2","title":"Radial Eng DiNet DAN-RX2","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003eDual Output Dante Endpoint\u003c\/strong\u003e\u003cbr\u003eThe DAN-RX2 is a 2-channel 24bit\/96kHz digital to analog endpoint that allows you to output audio from a Dante or AES67-compliant network for connection to professional audio systems.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eStereo analog output device for Dante networks\u003c\/li\u003e\r\n\u003cli\u003eBalanced XLR outputs for connection at mic or line level\u003c\/li\u003e\r\n\u003cli\u003eBuilt-in headphone amplifier for personal monitoring\u003c\/li\u003e\r\n\u003cli\u003e24bit\/96kHz digital to analog conversion\u003c\/li\u003e\r\n\u003cli\u003eCompliant to AES67 specifications\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eRobust digital audio distribution\u003c\/strong\u003e\u003cbr\u003eThe DAN-RX2 is a road-worthy digital receiver capable of delivering two channels of analog audio to any location from a Dante or AES-67 compliant network. Balanced XLR outputs include a ground lift and a separate headphone amp with its own level control is included for local testing or personal monitoring. The RJ45 network connection is compatible with Neutrik etherCON connector carriers to prevent accidental disconnection and protect cable terminations. Redundant powering is available for critical applications by using the included external power supply and Power over Ethernet (PoE) simultaneously, and the DAN-RX2 can be mounted in 19\" equipment racks with the optional SA series rackmount adaptor kit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiNET DAN-RX2 Applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the DAN-RX2 to connect a small PA system\u003c\/strong\u003e\u003cbr\u003eQuickly route a stereo feed to small PA systems in overflow rooms or remote locations within the venue.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the DAN-RX2 for press distribution\u003c\/strong\u003e\u003cbr\u003ePress recorders are often placed in different rooms away from the live event. The DAN-RX2 provides an easy way to send audio to these rooms to connect directly to a recorder or to feed a press box when necessary.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing the DAN-RX2 for personal monitoring\u003c\/strong\u003e\u003cbr\u003eThe dedicated headphone outputs on the DAN-RX2 allows it to be used as a personal monitoring system. The sound engineer can create a unique mix for musicians, producers or any other event staff that need to monitor a feed in any location on the network.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003eHigh current balanced active output device\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNumber of channels:\u003c\/td\u003e\r\n\u003ctd\u003e2\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e20Hz-20kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;100dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eGain:\u003c\/td\u003e\r\n\u003ctd\u003e+18dBu max @ 0dBFS\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.007% @ -6dBFS\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\r\n\u003ctd\u003e150Ω\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNoise:\u003c\/td\u003e\r\n\u003ctd\u003e44.1kHz, 48kHz, 88.2kHz, and 96kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e2x XLR male, 1x 3.5mm \u0026amp; 2x 1\/4” headphone out\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003e2x XLR male, 1x 3.5mm \u0026amp; 2x 1\/4” headphone out\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eExtras:\u003c\/td\u003e\r\n\u003ctd\u003eBit Depth: 24 bit; Idle Channel Noise: -108dB; Channel Separation: \u0026gt;75dB; Power Consumption: 1.25W; Power over Ethernet (PoE): Class 1 IEEE 802.3af\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e14-gauge steel\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFinish:\u003c\/td\u003e\r\n\u003ctd\u003eDurable powder coat\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e4.5” x 2” x 6” (121 x 6 x 147mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003e15VDC 400mA (included) or PoE\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895027105835,"sku":"RAD-R800 1065","price":423.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/dan-rx2-back-768x315__11215.1682435687.1280.1280.jpg?v=1775683585"},{"product_id":"radial-eng-p-clamp","title":"Radial Eng P-CLAMP","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eMost regular size J-Class enclosures such as the Radial JDI and J48 along with the smaller ProDI and SGI enclosures may be permanently affixed to a desk top, podium or inside a rack should the need arise using either the J-Clamp™ or P-Clamp™. Installation is easy, you merely remove the book-end outer shell and slide the inner frame into the Clamp and affix using the same hex screws. Handy flanges on each side are then used to bolt down the device for security. The P-Clamp is used to secure the ProDI, SGI and other smaller-sized Radial products. You merely remove the four outer screws from the DI box, and slide the inner frame into the P-Clamp.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDirect Box\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePro48: Active Direct Box\u003c\/li\u003e\r\n\u003cli\u003eProDI: Passive Direct Box\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eProRMP: Studio Reamper\u003c\/li\u003e\r\n\u003cli\u003eSGI: Guitar Interface System\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003ePreamp\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMcBoost: Mic Signal Booster\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895027138603,"sku":"RAD-R800 1090","price":45.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/pclamp-34-right-hirez-768x599__52308.1682435688.1280.1280.jpg?v=1775683585"},{"product_id":"radial-eng-prodi","title":"Radial Eng ProDI","description":"\u003cdiv class=\"modulePoints\"\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCompact passive direct box for stage and studio\u003c\/li\u003e\r\n\u003cli\u003eAble to handle huge transients without distortion\u003c\/li\u003e\r\n\u003cli\u003eTransformer isolation eliminates noisy ground loops\u003c\/li\u003e\r\n\u003cli\u003ePlug and play easy to use feature set - on stage or in the studio\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eThe Radial ProDI is a passive direct box that combines exceptional audio performance with solid dependable construction, making it the ideal general duty direct box for stage and studio.\u003c\/p\u003e\r\n\u003cp\u003eThe heart of the ProDI is a custom wound Radial transformer. It features an exceptionally high 140kΩ input impedance to reduce loading while enabling the ProDI to handle extreme signal levels at all frequencies without distortion. This is further improved upon with an internal MuMETAL® shield to protect against electromagnetic fields that can cause unshielded transformers to distort.\u003c\/p\u003e\r\n\u003cp\u003eThis compact direct box begins with 14-gauge steel I-beam skeleton for added rigidity and Radial's unique book-end design that creates a protective zone around switches and connectors. Glass filled nylon connectors and high cycle switches combine with the mil-spec PCB and internal RF filtering to provide durability and noise-free performance. A full bottom no-slip pad provides both mechanical isolation and electrical insulation to further protect against the rigors of professional touring.\u003c\/p\u003e\r\n\u003cp\u003eThe ProDI is ideally suited for instruments such as bass guitar, active acoustics, keyboards and just about anything else! When you consider all of the features and the affordable price tag, it is no wonder the Radial ProDI has become one of the most popular direct boxes ever made.\u003c\/p\u003e\r\n\u003cp\u003eThe Radial ProDI… Spectacular performance at a price that anyone can afford!\u003c\/p\u003e\r\n\u003cdiv class=\"leftSpecContent\"\u003e\r\n\u003cdiv class=\"indexHeader\"\u003e\r\n\u003ch2\u003eProDI™ Specifications\u003c\/h2\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eThe Radial ProDI is a professional grade passive direct box that employs the same high quality audio transformer used in the ProD2, ProAV1, ProAV2 and ProD8. Designed to be 'plug and play' easy to use, the ProDI supports a standard feature set that is ideally suited for live touring, yet equally effective for the studio. It is able to withstand exceptional signal levels while delivering a clean, natural tone with minimal distortion of all types.\u003c\/p\u003e\r\n\u003cbr\u003e\r\n\u003cdiv\u003e\n\u003ca class=\"blowUP\" href=\"http:\/\/www.radialeng.com\/images\/prodi\/prodi-blk-dgm-lrg.jpg\"\u003e\u003cimg alt=\"Radial ProDI Block Diagram\" src=\"http:\/\/www.radialeng.com\/images\/prodi\/prodi-blk-dgm.jpg\" width=\"360\"\u003e\u003c\/a\u003e\r\n\u003cdiv class=\"caption\"\u003eClick to view larger image.\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv class=\"rightSpecContent\"\u003e\r\n\u003ctable id=\"rounded-corner\" style=\"width: 450px;\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\n\u003cth\u003eSpecifications\u003c\/th\u003e\n\u003cth\u003eRADIAL ProDI\u003c\/th\u003e\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type: \u003c\/td\u003e\r\n\u003ctd\u003ePassive, transformer based\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eNumber of channels:\u003c\/td\u003e\r\n\u003ctd\u003eSingle channel (mono)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response: \u003c\/td\u003e\r\n\u003ctd\u003e20Hz ~ 18.5KHz (± 0.2dB)  \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range: \u003c\/td\u003e\r\n\u003ctd\u003e128dB \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum input: \u003c\/td\u003e\r\n\u003ctd\u003e+18dB @ 20Hz \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion: \u003c\/td\u003e\r\n\u003ctd\u003e0.01% from 20Hz~20kHz @-10dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePhase deviation: \u003c\/td\u003e\r\n\u003ctd\u003e1° @ 100Hz; 8° @ 20Hz \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput impedance: \u003c\/td\u003e\r\n\u003ctd\u003e140k Ohms, unbalanced \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput impedance: \u003c\/td\u003e\r\n\u003ctd\u003e150 Ohms, balanced \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e \u003c\/td\u003e\r\n\u003ctd\u003e \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\n\u003cth\u003eFeatures   \u003c\/th\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTransformer:\u003c\/td\u003e\r\n\u003ctd\u003e\n\u003cspan\u003eEclipse ET-DB2\u003c\/span\u003e, 12:1 ratio\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShield:\u003c\/td\u003e\r\n\u003ctd\u003eFaraday, MuMETAL® can\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput pad: \u003c\/td\u003e\r\n\u003ctd\u003e-15dB  \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eGround lift: \u003c\/td\u003e\r\n\u003ctd\u003eDisconnects pin-1 at XLR output \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eXLR configuration: \u003c\/td\u003e\r\n\u003ctd\u003eAES standard (pin-2 hot) \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConnectors:\u003c\/td\u003e\r\n\u003ctd\u003e1\/4\" in \u0026amp; thru, XLR-M out\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e \u003c\/td\u003e\r\n\u003ctd\u003e \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\n\u003cth\u003eGeneral\u003c\/th\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction: \u003c\/td\u003e\r\n\u003ctd\u003e14 gauge steel chassis \u0026amp; outer shell\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFinish:\u003c\/td\u003e\r\n\u003ctd\u003eDurable powder coat\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize:  (W x H x D)\u003c\/td\u003e\r\n\u003ctd\u003e70 x 108 x 44mm (2.75” x 4.25” x 1.75\")\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight: \u003c\/td\u003e\r\n\u003ctd\u003e.54kg (1.2lbs) \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size: W x H x D:\u003c\/td\u003e\r\n\u003ctd\u003e102 x 76 x 165mm (4.00\" x  3.00\"  x 6.50\")\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e0.61 kg (1.35 lbs)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower: \u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty: \u003c\/td\u003e\r\n\u003ctd\u003e\u003ca href=\"http:\/\/www.radialeng.com\/legal.php#Warranty\"\u003eRadial 3-year, transferable\u003c\/a\u003e\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003ctfoot\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003e\u003cem\u003eSpecifications are subject to change without notice.\u003c\/em\u003e\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tfoot\u003e\r\n\u003c\/table\u003e\r\n\u003cdiv id=\"specGraphs\"\u003e\r\n\u003cdiv\u003e\u003ca class=\"gGuide graphIcon\" href=\"http:\/\/www.radialeng.com\/graphguide.html\"\u003eClick Here for Graph Guide\u003c\/a\u003e\u003c\/div\u003e\r\n\u003cdiv class=\"graph\"\u003e\u003ca class=\"blowUP\" href=\"http:\/\/www.radialeng.com\/images\/passive-pro-freq-graph-lrg.jpg\"\u003e\u003cimg alt=\"Radial ProDI Frequency Response Graph\" src=\"http:\/\/www.radialeng.com\/images\/passive-pro-freq-graph.jpg\" height=\"200\" width=\"222\"\u003e\u003c\/a\u003e\u003c\/div\u003e\r\n\u003cdiv class=\"graph\"\u003e\u003ca class=\"blowUP\" href=\"http:\/\/www.radialeng.com\/images\/passive-pro-phase-graph-lrg.jpg\"\u003e\u003cimg alt=\"Radial ProDI Phase Response Graph\" src=\"http:\/\/www.radialeng.com\/images\/passive-pro-phase-graph.jpg\" height=\"200\" width=\"222\"\u003e\u003c\/a\u003e\u003c\/div\u003e\r\n\u003cdiv class=\"graph\"\u003e\u003ca class=\"blowUP\" href=\"http:\/\/www.radialeng.com\/images\/passive-pro-fft-graph-lrg.jpg\"\u003e\u003cimg alt=\"Radial ProDI FFT Graph\" src=\"http:\/\/www.radialeng.com\/images\/passive-pro-fft-graph.jpg\" height=\"200\" width=\"222\"\u003e\u003c\/a\u003e\u003c\/div\u003e\r\n\u003cdiv class=\"graph\"\u003e\u003ca class=\"blowUP\" href=\"http:\/\/www.radialeng.com\/images\/passive-pro-thdn-graph-lrg.jpg\"\u003e\u003cimg alt=\"Radial ProDI THD+N vs. Frequency\" src=\"http:\/\/www.radialeng.com\/images\/passive-pro-thdn-graph.jpg\" height=\"200\" width=\"222\"\u003e\u003c\/a\u003e\u003c\/div\u003e\r\n\u003cdiv class=\"caption\"\u003eClick to view larger graphs\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv class=\"clrAll\"\u003e \u003c\/div\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43895027171371,"sku":"RAD-R800 1100","price":98.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/pro-di-panels-lrg__62966.1682435689.1280.1280.jpg?v=1775683585"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/collections\/radial-engineering-seeklogo.svg?v=1774888329","url":"https:\/\/www.empirepro.com\/collections\/radial-engineering.oembed","provider":"Empire Pro","version":"1.0","type":"link"}