{"title":"RME","description":"","products":[{"product_id":"rme-12-mic","title":"RME 12 Mic","description":"\u003ch3\u003eOverview:\u003c\/h3\u003e\r\n\u003cp\u003eDesigned to provide professional audio over digital networks, the \u003cstrong\u003eRME 12Mic\u003c\/strong\u003e offers 12 channels of high-quality audio microphone preamps with MADI and ABV connections. You get preamps for mic, line-level, and instrument sources; preamps that can output digitally through a variety of different connections. It does this in a compact 1 RU housing and with the ability to control all of its routing capabilities wirelessly when configured into a wireless network.\u003c\/p\u003e\r\n\u003cp\u003eEach of its 12 pad-free input stages offer a 75 dB range of transparent gain. You'll find four combination XLR-1\/4\" inputs and eight XLR inputs. Selecting among line level, mic level, or instrument level is made possible by the front-panel control menu or can be done wirelessly on any network link via the web interface.\u003c\/p\u003e\r\n\u003cp\u003eOn the digital side, you'll find BNC MADI I\/O, three ADAT ports, MADI via an integrated SFP module, USB connectivity, and two Ethernet ports for AVB networking. MADI can be implemented for independent or redundant operation. The Ethernet ports are fully redundant.\u003c\/p\u003e\r\n\u003cp\u003eAny signal can be routed over a network with a fixed latency to ensure steady playback. RME's SteadyClock FS also ensures precise synchronization among elements, giving you a performance free from jitter so your audio is as clear as it can be. The unit also features a redundant power supplies: use the DC input and the IEC VAC input, ensuring that accidental disconnection of either won't cause the 12Mic to shut off.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\r\n\u003cul class=\"vertical\"\u003e\r\n\u003cli\u003e12-channel microphone preamplifier with support for AVB and MADI digital audio\u003c\/li\u003e\r\n\u003cli\u003eAVB core follows the IEEE standard, allowing for full control from any AVB controller\u003c\/li\u003e\r\n\u003cli\u003eFully redundant network ports and power supplies for maximum operational reliability\u003c\/li\u003e\r\n\u003cli\u003eClass-leading microphone preamps, clocking technology, and conversion quality add up to stellar sound quality\u003c\/li\u003e\r\n\u003cli\u003eControl gain levels and routing, create gain groups, and switch phantom power remotely via web browser from anywhere on your network\u003c\/li\u003e\r\n\u003cli\u003eUSB 2.0 port for network connectivity and firmware updates\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eSpecs:\u003c\/h3\u003e\r\n\u003cdiv class=\"group_K7YrQottgVsRZ4B6zAaGG\"\u003e\r\n\u003ctable class=\"table_o418fscimQZEg1oshu4aX\" data-selenium=\"specsItemGroupTable\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL firstSpecWhenNoGroupName_2L9ob5rxYHNpmiwoNrY0FE\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eForm Factor\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v firstSpecWhenNoGroupName_2L9ob5rxYHNpmiwoNrY0FE\" data-selenium=\"specsItemGroupTableColumnValue\"\u003eRackmount\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eChannels of I\/O\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003e\n\u003cstrong\u003eAnalog:\u003c\/strong\u003e\u003cbr\u003e12 Input \/ 2 Output\u003cbr\u003e\u003cstrong\u003eDigital:\u003c\/strong\u003e\u003cbr\u003e0 Input \/ 24 Output at 48 kHz\u003cbr\u003e\u003cstrong\u003eMADI:\u003c\/strong\u003e\u003cbr\u003e128 Input \/ 128 Output at 48 kHz\u003cbr\u003e\u003cstrong\u003eDigital:\u003c\/strong\u003e\u003cbr\u003e128 Input \/ 128 Output at 48 kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eMax Sample Rate\/Resolution\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003e96 kHz \/ 24-Bit\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eNumber of Mic Preamps\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003e12\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv class=\"group_K7YrQottgVsRZ4B6zAaGG\"\u003e\r\n\u003cdiv class=\"name_3mapjiENorVzh8SvFyXVPc\" data-selenium=\"specsItemGroupName\"\u003eConnectivity\u003c\/div\u003e\r\n\u003ctable class=\"table_o418fscimQZEg1oshu4aX\" data-selenium=\"specsItemGroupTable\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL \" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eAnalog Audio I\/O\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v \" data-selenium=\"specsItemGroupTableColumnValue\"\u003e\n\u003cstrong\u003e8 x \u003c\/strong\u003eXLR 3-Pin Balanced Mic\/Line Input\u003cbr\u003e\u003cstrong\u003e4 x \u003c\/strong\u003eCombo XLR-1\/4\" TRS Balanced\/Unbalanced Mic\/Line\/Hi-Z Input\u003cbr\u003e\u003cstrong\u003e1 x \u003c\/strong\u003e1\/4\" TRS Unbalanced Headphone Output\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003ePhantom Power\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003e+48 V (Selectable on Individual Inputs)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eDigital Audio I\/O\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003e\n\u003cstrong\u003e3 x \u003c\/strong\u003eTOSLINK Optical ADAT Output\u003cbr\u003e\u003cstrong\u003e1 x \u003c\/strong\u003eBNC Coaxial MADI Input\u003cbr\u003e\u003cstrong\u003e1 x \u003c\/strong\u003eBNC Coaxial MADI Output\u003cbr\u003e\u003cstrong\u003e1 x \u003c\/strong\u003eSC-Plug Optical MADI In\/Out\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eHost Connection \/ USB\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003e\n\u003cstrong\u003e1 x \u003c\/strong\u003eUSB Type-B (USB 2.0)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eNetwork I\/O\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003e\n\u003cstrong\u003e2 x \u003c\/strong\u003eetherCON\/RJ45 AVB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eMIDI I\/O\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003e\u003cem\u003eNone\u003c\/em\u003e\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv class=\"group_K7YrQottgVsRZ4B6zAaGG\"\u003e\r\n\u003cdiv class=\"name_3mapjiENorVzh8SvFyXVPc\" data-selenium=\"specsItemGroupName\"\u003ePerformance\u003c\/div\u003e\r\n\u003ctable class=\"table_o418fscimQZEg1oshu4aX\" data-selenium=\"specsItemGroupTable\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL \" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eGain\/Trim Range\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v \" data-selenium=\"specsItemGroupTableColumnValue\"\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e\u003cbr\u003e75 dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eMax Input Level\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003e+18 dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eSNR\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003cbr\u003e121.2 dBA\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv class=\"group_K7YrQottgVsRZ4B6zAaGG\"\u003e\r\n\u003cdiv class=\"name_3mapjiENorVzh8SvFyXVPc\" data-selenium=\"specsItemGroupName\"\u003eDigital Audio\u003c\/div\u003e\r\n\u003ctable class=\"table_o418fscimQZEg1oshu4aX\" data-selenium=\"specsItemGroupTable\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL \" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eSample Rates\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v \" data-selenium=\"specsItemGroupTableColumnValue\"\u003eUp to 192 kHz (A\/D Conversion)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eBit Depths\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003eUp to 24-Bit (A\/D Conversion)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eSync Sources\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003eInternal, Word Clock\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv class=\"group_K7YrQottgVsRZ4B6zAaGG\"\u003e\r\n\u003cdiv class=\"name_3mapjiENorVzh8SvFyXVPc\" data-selenium=\"specsItemGroupName\"\u003ePower\u003c\/div\u003e\r\n\u003ctable class=\"table_o418fscimQZEg1oshu4aX\" data-selenium=\"specsItemGroupTable\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL \" data-selenium=\"specsItemGroupTableColumnLabel\"\u003ePower Requirements\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v \" data-selenium=\"specsItemGroupTableColumnValue\"\u003eAC Input, AC\/DC Power Adapter (Not Included)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eAC Input Power\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003e100 to 240 VAC, 50 \/ 60 Hz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eAC\/DC Power Adapter\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003e12 VAC at 2.5 A (Not Included)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv class=\"group_K7YrQottgVsRZ4B6zAaGG\"\u003e\r\n\u003cdiv class=\"name_3mapjiENorVzh8SvFyXVPc\" data-selenium=\"specsItemGroupName\"\u003ePhysical\u003c\/div\u003e\r\n\u003ctable class=\"table_o418fscimQZEg1oshu4aX\" data-selenium=\"specsItemGroupTable\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL \" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eRackmount Size\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v \" data-selenium=\"specsItemGroupTableColumnValue\"\u003e1 RU (with Included Hardware)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv class=\"group_K7YrQottgVsRZ4B6zAaGG\"\u003e\r\n\u003cdiv class=\"name_3mapjiENorVzh8SvFyXVPc\" data-selenium=\"specsItemGroupName\"\u003ePackaging Info\u003c\/div\u003e\r\n\u003ctable class=\"table_o418fscimQZEg1oshu4aX\" data-selenium=\"specsItemGroupTable\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL \" data-selenium=\"specsItemGroupTableColumnLabel\"\u003ePackage Weight\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v \" data-selenium=\"specsItemGroupTableColumnValue\"\u003e8.85 lb\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"pair_3u9fnESIQrtuEu6ye_zM4k\" data-selenium=\"specsItemGroupTableRow\"\u003e\r\n\u003ctd class=\"label_3bLwbW8ibvYc5tUwpKVQsL\" data-selenium=\"specsItemGroupTableColumnLabel\"\u003eBox Dimensions (LxWxH)\u003c\/td\u003e\r\n\u003ctd class=\"value_11Av1yGkVYn9TX48mQeu9v\" data-selenium=\"specsItemGroupTableColumnValue\"\u003e22 x 12.5 x 4.5\"\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e","brand":"RME","offers":[{"title":"Default Title","offer_id":43895123443755,"sku":"RME-12 MIC","price":2469.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/untitled_4___13566.1682443560.1280.1280.jpg?v=1775684092"},{"product_id":"rme-fireface-802-fs","title":"RME Fireface 802 FS","description":"\u003cb\u003eFireface 802 FS\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e60-Channel 192 kHz high-end USB Audio Interface\u003cbr\u003e\u003cbr\u003eThe Fireface 802 FS is a highly integrated pro audio solution for live and studio use, all within a 19” enclosure. An interface designed for users who don’t want to make compromises in sound, stability and ultra-low latency operation, and who long for an unrivaled professional feature set. Once again a milestone interface from RME, including the best of the best and even a bit more. 60 channels of audio, high-end microphone preamps, reference class converters, a complete effects section and operation at up to 192 kHz are the base for many more features.\u003cbr\u003e\u003cp class=\"richp\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp class=\"richp\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e12 x Analog I\/O\u003cbr\u003e4 x XLR\/TRS Mic\/Inst\/Line\u003cbr\u003e2 x Phones Output\u003cbr\u003e1 x AES\/EBU I\/O\u003cbr\u003e2 x ADAT I\/O\u003cbr\u003e2 x SPDIF I\/O\u003cbr\u003e1 x Word Clock I\/O\u003cbr\u003e1 x MIDI I\/O\u003cbr\u003e1 x RME USB 2.0\u003cbr\u003eClass Compliant Mode\u003cbr\u003eTotalMix FX\u003cbr\u003eARC USB\u003cbr\u003eIncluding FX\u003cbr\u003eSteadyClock FS\u003cbr\u003eDC-coupled Outputs\u003cbr\u003e\u003cbr\u003e\u003cb\u003eEnhance Your Recording Setup - Discover Unmatched Flexibility\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUltra-low latency operation with RME USB 2 technology, combined with the legendary RME driver stability and maintenance. SteadyClock FS jitter suppression, individually switchable reference levels for all inputs and outputs, full stand-alone functionality and identical operation on Windows PC and Mac completes the package.\u003cbr\u003e\u003cbr\u003eThe Fireface 802 FS is based on a newly developed analog and digital board. While the analog board offers, for example, DC-coupled analog outputs as well as new AD and DA converters, the digital board also enables interesting new features thanks to updated high-tech components.\u003cbr\u003e\u003cbr\u003eThe front panel of the Fireface 802 FS provides four high-performance XLR\/TRS combo inputs for microphone, instrument and line signals and two stereo headphone jacks with +17 dBu output level, to provide high volumes even with hi-impedance headphones.\u003cbr\u003e\u003cbr\u003eThe rear panel reveals the full connectivity of the Fireface 802 FS. Besides MIDI and Word Clock I\/O, the two optical ADAT I\/Os, an AES\/EBU I\/O, and eight balanced analog inputs and outputs with line level are available. With the new Multi-Mode, the two ADAT I\/Os can be used as separate optical SPDIF inputs and outputs in addition to the AES I\/O. Users will also find a USB A port for connecting directly the optional available ARC USB.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003ePowerful Applications for Mixing, Monitoring and Measurement included\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Fireface 802 FS comes with the TotalMix FX DSP mixer offering comprehensive routing and monitoring options, as well as the DigiCheck Analyzer allowing to measure and analyze the digital data feed in both directions with maximum precision. TotalMix FX can completely replace an external mixer, enabling the creation of multiple latency-free monitor mixes with EQ, Dynamics, Reverb and Delay for any outputs, incl. main monitors and headphone mixes for musicians.\u003cbr\u003e\u003cbr\u003eThe additional TotalMix Remote is a remote control for TotalMix FX, to control the hardware mixer and effects in RME audio interfaces. TotalMix Remote mirrors the current state of the host system on the iPad and Windows\/Mac computers - the entire mixing state, the complete routing, all FX settings, up to the level meters, and everything in real-time. Easily adjust all the mixer and FX settings from a distance, via Ethernet and WiFi.\u003cbr\u003e\u003cbr\u003eTotalMix FX mixer with comprehensive routing, monitoring and effects options\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eUSB 2 Class Compliant Audio\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Fireface 802 FS operates in two different modes: driver-based USB 2 and Class Compliant. The Class Compliant mode is a standard that is natively supported by operating systems like Windows, Mac OSX and Linux distributions. No proprietary drivers are required, the device will be directly recognized when the CC firmware is loaded. The alternative CC mode can be activated via a recessed pushbutton switch directly at the back of the interface.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"richp\"\u003eThe Fireface 802 FS offers full USB 2.0 support in Class Compliant Mode. This makes all channels available in driverless operation for Linux, Mac and iPadOS. An iPad Pro with USB C can manage up to 60 channels for recording and playback in TotalMix FX for iPad and on system level.\u003c\/p\u003e\u003cb\u003eDC-Coupled Outputs - CV\/Gate Voltage Control\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMost audio interfaces are traditionally designed with what is called 'AC-coupled outputs', where capacitors are used to filter out any extreme low frequencies.\u003cbr\u003e\u003cbr\u003eWhilst these frequencies are generally considered undesirable for audio - eating into headroom and potentially causing damage to other equipment - one instance where DC-coupling remains desirable is the world of modular synthesizers, where static or slow-moving signals are used for control over various parameters such as pitch note values or LFOs.\u003cbr\u003e\u003cbr\u003e\u003cp class=\"richp\"\u003eAll of the Fireface 802 FS line-level outputs are fully DC-coupled, allowing for the sending of control voltages (CV) or Gate information to modular synthesizers (such as the popular Eurorack and Moog\/MOTM\/Synthesizers formats) and other studio hardware.\u003c\/p\u003e\u003cp class=\"richp\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003cb\u003eARC USB Remote Control - Plug’n Play Plus\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe optional available ARC USB connects to your computer via USB, and talks to TotalMix FX directly. It has 15 freely assignable and illuminated buttons, one encoder wheel, and a TS jack to connect a foot switch.\u003cbr\u003e\u003cbr\u003eThe ARC USB is a USB 1.1 MIDI remote control for the Fireface 802 FS. Thanks to operating as a UAC 1 class device, it is natively compatible to Windows and Mac OS X. As soon as it is present in the operating system, TotaIMix FX will automatically detect the ARC USB, and communicate with it via simple MIDI remote commands to control the 802 FS.\u003cbr\u003e\u003cbr\u003eDirect access to the most frequently used actions and commands of TotalMix FX\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eExperience Uncompromising Audio Quality\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eLike other RME products before the Fireface 802 FS combines excellent analog circuit design with latest digital conversion technology. All balanced TRS \u0026amp; XLR I\/Os as well as the two phones outputs offer outstanding low noise and distortion values. In best RME tradition and product philosophy converters and preamps don’t produce “sound”, they do not add or remove anything from the source signal, just capture it as it is.\u003cbr\u003e\u003cbr\u003eEquipped with the latest low latency A\/D and D\/A converter chips, all I\/Os operate at up to 192 kHz and reach high dynamic range on playback - even both headphone outputs. Their high power technology delivers high volume no matter if high or low impedance phones are used. Due to its efficient jitter reduction, RME’s superior SteadyClock FS guarantees state-of-the-art AD\/DA conversion, even when clocking to an external clock source.\u003cbr\u003e\u003cbr\u003eEvery input and output is individually switchable to these common professional studio levels: -10 dBV, +4 dBu, HiGain (equivalent to +2 dBV, +13 dBu and +19 dBu for digital full scale). All outputs can be used for ASIO Direct Monitoring (ADM) purposes.\u003cbr\u003e\u003cbr\u003eTotalMix FX\u003cbr\u003e\u003cbr\u003eCapture every detail with latest digital conversion technology\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eProfessional high-transparency Preamps\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eFor Microphones and Instruments with Low Latency Conversion. The 802 FS has four high-transparency preamps, also with low latency converters. Microphone and instrument preamps of the 802 FS use the classic technology of the OctaMic II, a high-end preamp for supreme sonic demands and critical applications, like the professional recording of classical concerts. The symmetrical preamp design impresses with extremely low distortion, excellent signal to noise ratio and a perfect linear frequency response. A premium solution for transmitting and amplifying any audio input truly unchanged, be it high-level stage or typical studio signals, lower level and high-impedance instruments, or dynamic, condenser and ribbon microphones.\u003cbr\u003e\u003cbr\u003eThe four inputs on the front use balanced XLR\/TS combo sockets and operate alternatively as Hi-Z inputs. Directly plug in up to four guitars or other instruments - no other hardware required. Each channel can be individually switched to 48V phantom power or instrument mode. LEDs for signal, clip, TS operation and activated phantom power provide overview on the unit's status.\u003cbr\u003e\u003cbr\u003eThe Fireface 802 FS follows RME's tradition of providing flexible and expandable audio systems. Adding additional preamplifiers or more analog inputs is easily done via the dual ADAT optical I\/Os on the rear.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStand Alone Operation with Setup Recall\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Fireface 802 FS can be set up and configured directly via iPad, MIDI remote and ARC USB. Additionally 6 memory slots are present where the current configuration can be stored permanently. This way the 802 FS operates independently from a computer. In stand-alone operation it can turn itself into different devices by the simple push on a button.\u003cbr\u003e\u003cb\u003eICC - Intelligent Clock Control\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"richp\"\u003eNot only displays every clock status, but will also retain the last valid input sample rate in case of failure of the external source. Other renowned RME technologies like SyncCheck offer a quick detection of clock pro\u003c\/p\u003e","brand":"RME","offers":[{"title":"Default Title","offer_id":43895124033579,"sku":"RME-FIREFACE 802 FS","price":1892.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/Fireface-802-FS__25258.1701428417.1280.1280.png?v=1775692104"},{"product_id":"rme-locking-iec-power-cable","title":"RME Locking IEC Power Cable","description":"\u003cspan data-mce-fragment=\"1\"\u003eGrounded IEC cable with V-Lock connector for RME 12Mic, M-32 Pro, and M-1610 models\u003c\/span\u003e","brand":"RME","offers":[{"title":"Default Title","offer_id":43895124394027,"sku":"RME-LOCKING IEC CABLE","price":16.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/image_1024__13214.1701425792.1280.1280.png?v=1775692104"},{"product_id":"rme-m-32-pro-ad-ii","title":"RME M-32 Pro AD II","description":"M-32 AD Pro II\u003cbr\u003e\u003cbr\u003eHigh-end 32-Channel 192 kHz AD or DA Converter with MADI and AVB\u003cbr\u003e\u003cbr\u003eThe M-32 Pro II series is designed to meet the demanding requirements of professional studios, immersive sound installations, live sound systems, and industrial applications that need a reliable solution for analog conversion with high-end network audio processing. These new converters are available with either 32 analog inputs or outputs, and either with Dante® or AVB for a choice of four different models.\u003cbr\u003e\u003cbr\u003eBoasting up to 32-channels, fully equipped MADI I\/Os (coaxial \u0026amp; optical via optional SPF module), improved specs with extremely low THD values, intelligent channel routing and innovative usability, the brand-new M-32 Pro II Series truly represents the state-of-the art in exceptional audio performance.\u003cbr\u003e\u003cbr\u003e32 x Analog I\/O\u003cbr\u003e1 x MADI Optical SFP (optional)\u003cbr\u003e1 x MADI I\/O coaxial\u003cbr\u003e1 x Word Clock I\/O\u003cbr\u003e1 x MIDI I\/O\u003cbr\u003e2 x Gigabit Ethernet (802.3 compliant)\u003cbr\u003eUSB for firmware \u0026amp; remote control\u003cbr\u003eRedundant PSU\u003cbr\u003eDC-coupled Outputs\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Ultimate Solution for High-End Network Audio Processing\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe latest 32-channel M-32 Pro II is based on state-of-the-art, high-resolution converter components and a fully balanced analog circuit design that offer signal-to-noise ratios of 120 dB(A) with very low latencies — placing the converters in the reference class. While the M-32 AD Pro II offers the same outstanding analog performance as its predecessor, the DA-Converter has even improved the THD+N to -111 dB. All models benefit from impulse response optimization at sampling rates of 88.2 kHz and higher to minimize ringing artifacts in the conversion process.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eRME Audio AVB \u0026amp; Dante Solutions\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAVB Network Solutions by RME Audio\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003ePlug \u0026amp; play - rapid user interaction\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eControl all device states directly from the front panel for convenient, direct access to all features. RME AVB devices can be reached over network (including wirelessly over Wi-Fi) and USB for convenient remote access, allowing the rapid creation of gain groups, phantom power switching and clock configuration. In addition, a JSON based API and even SysEx MIDI commands can be used to integrate each model virtually anywhere. The integrated routing matrix allows single channel routing across all analog and digital I\/O. As such, problem-solving of signals, clocking, connectivity or other issues is both simple and straight-forward!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eRME AVB Network Audio Devices\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eDirect access to all features via the web-interface on any network\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eAVB Audio Networking - 2 fully redundant network ports\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn addition to the two MADI I\/Os including separate signal routing, the new M-32 DA Pro II and M-32 AD Pro II feature an AVB interface based on the open network standards IEEE 802.1 and 1722.1, enabling transmission of the 32 analog channels at a maximum 192 kHz sampling rate via a single Ethernet cable. Combined with external AVB switches, the new M-Series converters can be quickly, easily and reliably integrated into more complex network structures thanks to the comprehensive time-synchronous signal processing of the AVB protocol. Up to 128 audio channels at 48 kHz (96 @ 96k, 64 @ 192k) can be sent and received over AVB in total across all streams.\u003cbr\u003e\u003cbr\u003eRME offers an AVB device with two fully redundant network ports, based on the recommendations of MILAN™. The RME AVB Core has meticulously implemented the IEEE standards for audio- streaming, discovery and control, allowing RME devices to be both discovered and fully controlled by any AVB controller, and making vendor-specific control protocols a thing of the past. Any signal reaching the M-32 Pro II can be routed and streamed over a network with fixed latency and guaranteed bandwidth - no switch configuration is required!\u003cbr\u003e\u003cbr\u003eMultiple layers of redundancy make the M-32 Pro II Series a perfect companion for any kind of live sound application.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eAnalog Line Level Performance\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eFor maximum compatibility with a variety of analog hardware, the individual channels of the M-32 AD Pro II and M-32 DA Pro II can be operated with different line levels - each with full resolution of the converters. Besides +19 dBu and +13 dBu, the new M-Series is one of the few solutions available on the market that also allows working with the SMPTE® recommendation of +24 dBu at 0 dBFS.\u003cbr\u003e\u003cbr\u003eAvailable as AD or DA version for unprecedented flexibility and compatibility in format conversion.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eEasy to Operate\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eTri-color back-lit channel label fields offer an almost indispensable advantage in fixed installations. Using the provided transparent papers, users can create individual channel labels and securely affix them behind a magnetic cover, where they are illuminated depending on signal level. This provides a comprehensive overview of analog channel assignments and signal flow.\u003cbr\u003eUpdates included\u003cbr\u003e\u003cbr\u003eWith hardware built to last, RME makes sure the firmware running on the device does not fall behind. Since the release of the first version of the M-32 Pro, numerous feature updates have been released, delivering an increase of AVB total stream and channel count from four streams (64 channels) to nine streams (128 channels + additional CRF clock stream), additional stream formats, numerous adjustments for MILAN™ compatibility, single channel routing, preset upload and download, configurable preset names, static IP address assignment, and many more. They reflect the ongoing commitment of RME developers to sound engineers that expect the best performance of their devices for years to last.\u003cbr\u003e\u003cbr\u003e","brand":"RME","offers":[{"title":"Default Title","offer_id":43895124590635,"sku":"RME-M-32 AD PRO II","price":3434.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/M-32-AD-_-M-32-DA-Pro-1__90829.1701427305.1280.1280.jpg?v=1775692104"},{"product_id":"rme-m-32-pro-ad-ii-dante","title":"RME M-32 Pro AD II Dante","description":"\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cp\u003eHigh-end 32-Channel 192 kHz AD or DA Converter with MADI and Dante\u003c\/p\u003e\n\u003cp\u003eThe\n M-32 Pro II series is designed to meet the demanding requirements of \nprofessional studios, immersive sound installations, live sound systems,\n and industrial applications that need a reliable solution for analog \nconversion with high-end network audio processing. These new converters \nare available with either 32 analog inputs or outputs, and either with \nDante® or AVB for a choice of four different models.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e32 x Analog I\/O\u003cbr\u003e1 x MADI Optical SFP (optional)\u003cbr\u003e1 x MADI I\/O coaxial\u003cbr\u003e1 x Word Clock I\/O\u003cbr\u003e1 x MIDI I\/O\u003cbr\u003e2 x Gigabit Ethernet (802.3 compliant)\u003cbr\u003eUSB for firmware \u0026amp; remote control\u003cbr\u003eRedundant PSU\u003cbr\u003eDC-coupled Outputs\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Ultimate Solution for High-End Network Audio Processing\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe\n latest 32-channel M-32 Pro II is based on state-of-the-art, \nhigh-resolution converter components and a fully balanced analog circuit\n design that offer signal-to-noise ratios of 120 dB(A) with very low \nlatencies — placing the converters in the reference class. While the \nM-32 AD Pro II offers the same outstanding analog performance as its \npredecessor, the DA-Converter has even improved the THD+N to -111 dB. \nAll models benefit from impulse response optimization at sampling rates \nof 88.2 kHz and higher to minimize ringing artifacts in the conversion \nprocess.\u003cbr\u003e\u003cbr\u003eRME Audio AVB \u0026amp; Dante Solutions\u003cbr\u003e\u003cbr\u003eNetwork Audio Solutions by RME Audio\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003ePlug \u0026amp; play - rapid user interaction\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eControl\n all device states directly from the front panel for convenient, direct \naccess to all features. RME network audio devices can be reached over \nnetwork (including wirelessly over Wi-Fi) and USB for convenient remote \naccess, allowing the rapid creation of gain groups, phantom power \nswitching and clock configuration. In addition, a JSON based API and \neven SysEx MIDI commands can be used to integrate each model virtually \nanywhere. The integrated routing matrix allows single channel routing \nacross all analog and digital I\/O. As such, problem-solving of signals, \nclocking, connectivity or other issues is both simple and \nstraight-forward!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eRME AVB Network Audio Devices\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eDirect access to all features via the web-interface on any network\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eDante Audio Networking - 2 fully redundant network ports\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eWith\n an ever changing landscape of network audio solutions, the challenge \nfor RME’s development team was to design a highly performant device \nplatform that will guarantee unparalleled flexibility and stability for \nyears to come. To match these high requirements in accordance with RME’s\n core principles everything was built from the ground up. By integrating\n Audinate’s Dante IP Core on a custom built RME FPGA platform, RME is \nnot only delivering a highly flexible solution but also gets one step \ncloser to achieving a truly universal Audio Networking experience.\u003cbr\u003e\u003cbr\u003eDante\n connectivity was a frequent request and has been integrated to run \nnatively on the M-32 Pro II-D hardware. It provides direct connectivity \nto other audio devices via standard switches – and allows users to \ndirectly record and play back up to 64 channels from their computer to \nany of the M-32’s analog and digital I\/O using Audinate’s Dante Virtual \nSoundcard™ (License not included)\u003cbr\u003e\u003cbr\u003eMultiple layers of redundancy make the M-32 Pro II Series a perfect companion for any kind of live sound application.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eAnalog Line Level Performance\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eFor\n maximum compatibility with a variety of analog hardware, the individual\n channels of the M-32 AD Pro II and M-32 DA Pro II can be operated with \ndifferent line levels - each with full resolution of the converters. \nBesides +19 dBu and +13 dBu, the new M-Series is one of the few \nsolutions available on the market that also allows working with the \nSMPTE® recommendation of +24 dBu at 0 dBFS.\u003cbr\u003e\u003cbr\u003eAvailable as AD or DA version for unprecedented flexibility and compatibility in format conversion.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eEasy to Operate\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eTri-color\n back-lit channel label fields offer an almost indispensable advantage \nin fixed installations. Using the provided transparent papers, users can\n create individual channel labels and securely affix them behind a \nmagnetic cover, where they are illuminated depending on signal level. \nThis provides a comprehensive overview of analog channel assignments and\n signal flow.\u003cbr\u003eUpdates included\u003cbr\u003e\u003cbr\u003eWith hardware built to last, \nRME makes sure the firmware running on the device does not fall behind. \nSince the release of the first version of the M-32 Pro, numerous feature\n updates have been released, delivering an increase of AVB total stream \nand channel count from four streams (64 channels) to nine streams (128 \nchannels + additional CRF clock stream), additional stream formats, \nnumerous adjustments for MILAN™ compatibility, single channel routing, \npreset upload and download, configurable preset names, static IP address\n assignment, and many more. They reflect the ongoing commitment of RME \ndevelopers to sound engineers that expect the best performance of their \ndevices for years to last.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RME","offers":[{"title":"Default Title","offer_id":43895124656171,"sku":"RME-M-32 AD PRO II-D","price":3949.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/RME-M-32-AD-Pro-II__07974.1701427940.1280.1280.jpg?v=1775692105"},{"product_id":"rme-m-32-pro-da-ii","title":"RME M-32 Pro DA II","description":"M-32 DA Pro II\u003cbr\u003e\u003cbr\u003eHigh-end 32-Channel 192 kHz AD or DA Converter with MADI and AVB\u003cbr\u003e\u003cbr\u003eThe\n M-32 Pro II series is designed to meet the demanding requirements of \nprofessional studios, immersive sound installations, live sound systems,\n and industrial applications that need a reliable solution for analog \nconversion with high-end network audio processing. These new converters \nare available with either 32 analog inputs or outputs, and either with \nDante® or AVB for a choice of four different models.\u003cbr\u003e\u003cbr\u003eBoasting up \nto 32-channels, fully equipped MADI I\/Os (coaxial \u0026amp; optical via \noptional SPF module), improved specs with extremely low THD values, \nintelligent channel routing and innovative usability, the brand-new M-32\n Pro II Series truly represents the state-of-the art in exceptional \naudio performance.\u003cbr\u003e\u003cbr\u003e32 x Analog I\/O\u003cbr\u003e1 x MADI Optical SFP (optional)\u003cbr\u003e1 x MADI I\/O coaxial\u003cbr\u003e1 x Word Clock I\/O\u003cbr\u003e1 x MIDI I\/O\u003cbr\u003e2 x Gigabit Ethernet (802.3 compliant)\u003cbr\u003eUSB for firmware \u0026amp; remote control\u003cbr\u003eRedundant PSU\u003cbr\u003eDC-coupled Outputs\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Ultimate Solution for High-End Network Audio Processing\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe\n latest 32-channel M-32 Pro II is based on state-of-the-art, \nhigh-resolution converter components and a fully balanced analog circuit\n design that offer signal-to-noise ratios of 120 dB(A) with very low \nlatencies — placing the converters in the reference class. While the \nM-32 AD Pro II offers the same outstanding analog performance as its \npredecessor, the DA-Converter has even improved the THD+N to -111 dB. \nAll models benefit from impulse response optimization at sampling rates \nof 88.2 kHz and higher to minimize ringing artifacts in the conversion \nprocess.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eRME Audio AVB \u0026amp; Dante Solutions\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAVB Network Solutions by RME Audio\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003ePlug \u0026amp; play - rapid user interaction\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eControl\n all device states directly from the front panel for convenient, direct \naccess to all features. RME AVB devices can be reached over network \n(including wirelessly over Wi-Fi) and USB for convenient remote access, \nallowing the rapid creation of gain groups, phantom power switching and \nclock configuration. In addition, a JSON based API and even SysEx MIDI \ncommands can be used to integrate each model virtually anywhere. The \nintegrated routing matrix allows single channel routing across all \nanalog and digital I\/O. As such, problem-solving of signals, clocking, \nconnectivity or other issues is both simple and straight-forward!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eRME AVB Network Audio Devices\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eDirect access to all features via the web-interface on any network\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eAVB Audio Networking - 2 fully redundant network ports\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn\n addition to the two MADI I\/Os including separate signal routing, the \nnew M-32 DA Pro II and M-32 AD Pro II feature an AVB interface based on \nthe open network standards IEEE 802.1 and 1722.1, enabling transmission \nof the 32 analog channels at a maximum 192 kHz sampling rate via a \nsingle Ethernet cable. Combined with external AVB switches, the new \nM-Series converters can be quickly, easily and reliably integrated into \nmore complex network structures thanks to the comprehensive \ntime-synchronous signal processing of the AVB protocol. Up to 128 audio \nchannels at 48 kHz (96 @ 96k, 64 @ 192k) can be sent and received over \nAVB in total across all streams.\u003cbr\u003e\u003cbr\u003eRME offers an AVB device with \ntwo fully redundant network ports, based on the recommendations of \nMILAN™. The RME AVB Core has meticulously implemented the IEEE standards\n for audio- streaming, discovery and control, allowing RME devices to be\n both discovered and fully controlled by any AVB controller, and making \nvendor-specific control protocols a thing of the past. Any signal \nreaching the M-32 Pro II can be routed and streamed over a network with \nfixed latency and guaranteed bandwidth - no switch configuration is \nrequired!\u003cbr\u003e\u003cbr\u003eMultiple layers of redundancy make the M-32 Pro II Series a perfect companion for any kind of live sound application.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eAnalog Line Level Performance\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eFor\n maximum compatibility with a variety of analog hardware, the individual\n channels of the M-32 AD Pro II and M-32 DA Pro II can be operated with \ndifferent line levels - each with full resolution of the converters. \nBesides +19 dBu and +13 dBu, the new M-Series is one of the few \nsolutions available on the market that also allows working with the \nSMPTE® recommendation of +24 dBu at 0 dBFS.\u003cbr\u003e\u003cbr\u003eAvailable as AD or DA version for unprecedented flexibility and compatibility in format conversion.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eEasy to Operate\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eTri-color\n back-lit channel label fields offer an almost indispensable advantage \nin fixed installations. Using the provided transparent papers, users can\n create individual channel labels and securely affix them behind a \nmagnetic cover, where they are illuminated depending on signal level. \nThis provides a comprehensive overview of analog channel assignments and\n signal flow.\u003cbr\u003eUpdates included\u003cbr\u003e\u003cbr\u003eWith hardware built to last, \nRME makes sure the firmware running on the device does not fall behind. \nSince the release of the first version of the M-32 Pro, numerous feature\n updates have been released, delivering an increase of AVB total stream \nand channel count from four streams (64 channels) to nine streams (128 \nchannels + additional CRF clock stream), additional stream formats, \nnumerous adjustments for MILAN™ compatibility, single channel routing, \npreset upload and download, configurable preset names, static IP address\n assignment, and many more. They reflect the ongoing commitment of RME \ndevelopers to sound engineers that expect the best performance of their \ndevices for years to last.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"RME","offers":[{"title":"Default Title","offer_id":43895124754475,"sku":"RME-M-32 DA PRO II","price":3434.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/M-32-AD-_-M-32-DA-Pro__84457.1701427250.1280.1280.jpg?v=1775692105"},{"product_id":"rme-m-32-pro-da-ii-dante","title":"RME M-32 Pro DA II Dante","description":"\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cp\u003eHigh-end 32-Channel 192 kHz AD or DA Converter with MADI and Dante\u003c\/p\u003e\n\u003cp\u003eThe\n M-32 Pro II series is designed to meet the demanding requirements of \nprofessional studios, immersive sound installations, live sound systems,\n and industrial applications that need a reliable solution for analog \nconversion with high-end network audio processing. These new converters \nare available with either 32 analog inputs or outputs, and either with \nDante® or AVB for a choice of four different models.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e32 x Analog I\/O\u003cbr\u003e1 x MADI Optical SFP (optional)\u003cbr\u003e1 x MADI I\/O coaxial\u003cbr\u003e1 x Word Clock I\/O\u003cbr\u003e1 x MIDI I\/O\u003cbr\u003e2 x Gigabit Ethernet (802.3 compliant)\u003cbr\u003eUSB for firmware \u0026amp; remote control\u003cbr\u003eRedundant PSU\u003cbr\u003eDC-coupled Outputs\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Ultimate Solution for High-End Network Audio Processing\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe latest 32-channel M-32 Pro II is based on state-of-the-art, high-resolution converter components and a fully balanced analog circuit design that offer signal-to-noise ratios of 120 dB(A) with very low latencies — placing the converters in the reference class. While the M-32 AD Pro II offers the same outstanding analog performance as its predecessor, the DA-Converter has even improved the THD+N to -111 dB. All models benefit from impulse response optimization at sampling rates of 88.2 kHz and higher to minimize ringing artifacts in the conversion process.\u003cbr\u003e\u003cbr\u003eRME Audio AVB \u0026amp; Dante Solutions\u003cbr\u003e\u003cbr\u003eNetwork Audio Solutions by RME Audio\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003ePlug \u0026amp; play - rapid user interaction\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eControl all device states directly from the front panel for convenient, direct access to all features. RME network audio devices can be reached over network (including wirelessly over Wi-Fi) and USB for convenient remote access, allowing the rapid creation of gain groups, phantom power switching and clock configuration. In addition, a JSON based API and even SysEx MIDI commands can be used to integrate each model virtually anywhere. The integrated routing matrix allows single channel routing across all analog and digital I\/O. As such, problem-solving of signals, clocking, connectivity or other issues is both simple and straight-forward!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eRME AVB Network Audio Devices\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eDirect access to all features via the web-interface on any network\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eDante Audio Networking - 2 fully redundant network ports\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eWith an ever changing landscape of network audio solutions, the challenge for RME’s development team was to design a highly performant device platform that will guarantee unparalleled flexibility and stability for years to come. To match these high requirements in accordance with RME’s core principles everything was built from the ground up. By integrating Audinate’s Dante IP Core on a custom built RME FPGA platform, RME is not only delivering a highly flexible solution but also gets one step closer to achieving a truly universal Audio Networking experience.\u003cbr\u003e\u003cbr\u003eDante connectivity was a frequent request and has been integrated to run natively on the M-32 Pro II-D hardware. It provides direct connectivity to other audio devices via standard switches – and allows users to directly record and play back up to 64 channels from their computer to any of the M-32’s analog and digital I\/O using Audinate’s Dante Virtual Soundcard™ (License not included)\u003cbr\u003e\u003cbr\u003eMultiple layers of redundancy make the M-32 Pro II Series a perfect companion for any kind of live sound application.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eAnalog Line Level Performance\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eFor maximum compatibility with a variety of analog hardware, the individual channels of the M-32 AD Pro II and M-32 DA Pro II can be operated with different line levels - each with full resolution of the converters. Besides +19 dBu and +13 dBu, the new M-Series is one of the few solutions available on the market that also allows working with the SMPTE® recommendation of +24 dBu at 0 dBFS.\u003cbr\u003e\u003cbr\u003eAvailable as AD or DA version for unprecedented flexibility and compatibility in format conversion.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cb\u003eEasy to Operate\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eTri-color back-lit channel label fields offer an almost indispensable advantage in fixed installations. Using the provided transparent papers, users can create individual channel labels and securely affix them behind a magnetic cover, where they are illuminated depending on signal level. This provides a comprehensive overview of analog channel assignments and signal flow.\u003cbr\u003eUpdates included\u003cbr\u003e\u003cbr\u003eWith hardware built to last, RME makes sure the firmware running on the device does not fall behind. Since the release of the first version of the M-32 Pro, numerous feature updates have been released, delivering an increase of AVB total stream and channel count from four streams (64 channels) to nine streams (128 channels + additional CRF clock stream), additional stream formats, numerous adjustments for MILAN™ compatibility, single channel routing, preset upload and download, configurable preset names, static IP address assignment, and many more. They reflect the ongoing commitment of RME developers to sound engineers that expect the best performance of their devices for years to last.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"RME","offers":[{"title":"Default Title","offer_id":43895124820011,"sku":"RME-M-32 DA PRO II-D","price":3949.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/RME-M-32-AD-Pro-II__01046.1701427901.1280.1280.jpg?v=1775692106"},{"product_id":"rme-rme-external-power-supply-iec","title":"RME RME External Power Supply IEC","description":"\u003cul\u003e\n\u003cli\u003eInput: 100-240V\/50-60 Hz\u003c\/li\u003e\n\u003cli\u003eOutput: 12V\/2A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExternal power supply for the following RME devices\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFireface UCX\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFireface UC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFireface 400 (obsolete)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eQuadMic (obsolete)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eADI-2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eADI-4DD\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RME","offers":[{"title":"Default Title","offer_id":43895124983851,"sku":"RME-NT-RME-12","price":69.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/RME-NT-RME-12__45634.1701425167.1280.1280.jpg?v=1775692106"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/collections\/RME.svg?v=1777067837","url":"https:\/\/www.empirepro.com\/collections\/rme.oembed","provider":"Empire Pro","version":"1.0","type":"link"}