{"title":"Signal Processing","description":"","products":[{"product_id":"radial-eng-catapult-mini-tx","title":"Radial Eng Catapult MINI TX","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe Catapult Mini is a compact passive audio snake that allows you to send four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSend four channels of analog audio over a Cat 5\/6 cable\u003c\/li\u003e\r\n\u003cli\u003eAvailable with XLRM, XLRF or ¼” TRS connectors\u003c\/li\u003e\r\n\u003cli\u003eWorks with a building’s existing cable infrastructure\u003c\/li\u003e\r\n\u003cli\u003eCompact and lightweight, yet durable and rugged\u003c\/li\u003e\r\n\u003cli\u003eEconomical Cat 5\/6 cable replaces bulky multichannel audio snakes\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv class=\"col-12 col-sm-6 order-2 order-sm-1\"\u003e\r\n\u003ch4\u003eAnalog audio over Cat 5 wiring\u003c\/h4\u003e\r\n\u003cp\u003eThe Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.\u003c\/p\u003e\r\n\u003cdiv class=\"col-12 col-sm-6\"\u003e\r\n\u003ch4\u003eStraight-wire passive operation\u003c\/h4\u003e\r\n\u003cp\u003eCatapult modules require no power to operate, and since they keep the signal in the analog realm, no digital conversion is necessary. Straight-wire connection from the XLRs to the RJ45 connector on a Cat 5 cable ensures that your audio passes through without coloration or distortion.\u003c\/p\u003e\r\n\u003cdiv class=\"col-12 col-sm-6 order-2 order-sm-1\"\u003e\r\n\u003ch4\u003eUtilize pre-existing cable installations\u003c\/h4\u003e\r\n\u003cp\u003eAs many buildings are already pre-wired for Cat 5, you can take advantage of this to transmit audio between distant rooms without the need to install or supply new cabling. This eliminates the need for bulky and expensive multi-channel audio cable, and allows contractors to benefit from installed network cable and easily connect from one room to another.\u003c\/p\u003e\r\n\u003cdiv class=\"col-12 col-sm-6\"\u003e\r\n\u003ch4\u003eMix \u0026amp; Match\u003c\/h4\u003e\r\n\u003cp\u003eThree versions of the Catapult Mini are available: The Mini TX features female XLR connectors, the Mini RX has male XLRs, and the Mini TRS is equipped with ¼” TRS jacks for balanced connection to any pro audio device.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive splitter\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e7Hz ~ 20KHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e140dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.0005% @ 1kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCommon Mode Rejection Ratio:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;103dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+35dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eGround lift\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR, TRS, RJ45 (model dependant)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR, TRS, RJ45 (model dependant)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e16-gauge steel chassis \u0026amp; outer shell\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e4.125\" x 1.56\" x 1.31\" (105 x 40 x 33mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e0.85lb (0.4kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e6.25\" x 4.25\" x 3\" (159 x 108 x 76mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e1.1lb (0.5kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43086785019947,"sku":"RAD-R800 8028","price":102.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/catapult_mini-34-right-768x501__75037.1682435738.1280.1280.jpg?v=1775683613"},{"product_id":"radial-eng-catapult-mini-rx","title":"Radial Eng Catapult MINI RX","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe Catapult Mini is a compact passive audio snake that allows you to send four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSend four channels of analog audio over a Cat 5\/6 cable\u003c\/li\u003e\r\n\u003cli\u003eAvailable with XLRM, XLRF or ¼” TRS connectors\u003c\/li\u003e\r\n\u003cli\u003eWorks with a building’s existing cable infrastructure\u003c\/li\u003e\r\n\u003cli\u003eCompact and lightweight, yet durable and rugged\u003c\/li\u003e\r\n\u003cli\u003eEconomical Cat 5\/6 cable replaces bulky multichannel audio snakes\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv class=\"col-12 col-sm-6 order-2 order-sm-1\"\u003e\r\n\u003ch4\u003eAnalog audio over Cat 5 wiring\u003c\/h4\u003e\r\n\u003cp\u003eThe Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.\u003c\/p\u003e\r\n\u003cdiv class=\"col-12 col-sm-6\"\u003e\r\n\u003ch4\u003eStraight-wire passive operation\u003c\/h4\u003e\r\n\u003cp\u003eCatapult modules require no power to operate, and since they keep the signal in the analog realm, no digital conversion is necessary. Straight-wire connection from the XLRs to the RJ45 connector on a Cat 5 cable ensures that your audio passes through without coloration or distortion.\u003c\/p\u003e\r\n\u003cdiv class=\"col-12 col-sm-6 order-2 order-sm-1\"\u003e\r\n\u003ch4\u003eUtilize pre-existing cable installations\u003c\/h4\u003e\r\n\u003cp\u003eAs many buildings are already pre-wired for Cat 5, you can take advantage of this to transmit audio between distant rooms without the need to install or supply new cabling. This eliminates the need for bulky and expensive multi-channel audio cable, and allows contractors to benefit from installed network cable and easily connect from one room to another.\u003c\/p\u003e\r\n\u003cdiv class=\"col-12 col-sm-6\"\u003e\r\n\u003ch4\u003eMix \u0026amp; Match\u003c\/h4\u003e\r\n\u003cp\u003eThree versions of the Catapult Mini are available: The Mini TX features female XLR connectors, the Mini RX has male XLRs, and the Mini TRS is equipped with ¼” TRS jacks for balanced connection to any pro audio device.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table feature-product\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eAudio circuit type:\u003c\/td\u003e\r\n\u003ctd\u003ePassive splitter\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFrequency response:\u003c\/td\u003e\r\n\u003ctd\u003e7Hz ~ 20KHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDynamic range:\u003c\/td\u003e\r\n\u003ctd\u003e140dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTotal harmonic distortion:\u003c\/td\u003e\r\n\u003ctd\u003e0.0005% @ 1kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCommon Mode Rejection Ratio:\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt;103dB\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eMaximum Input:\u003c\/td\u003e\r\n\u003ctd\u003e+35dBu\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"2\"\u003eFeatures\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd colspan=\"2\"\u003eGround lift\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eInput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR, TRS, RJ45 (model dependant)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eOutput Connectors:\u003c\/td\u003e\r\n\u003ctd\u003eXLR, TRS, RJ45 (model dependant)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"heading\"\u003e\r\n\u003ctd colspan=\"3\"\u003eGeneral\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConstruction:\u003c\/td\u003e\r\n\u003ctd\u003e16-gauge steel chassis \u0026amp; outer shell\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSize (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e4.125\" x 1.56\" x 1.31\" (105 x 40 x 33mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWeight:\u003c\/td\u003e\r\n\u003ctd\u003e0.85lb (0.4kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping size (L x W x D):\u003c\/td\u003e\r\n\u003ctd\u003e6.25\" x 4.25\" x 3\" (159 x 108 x 76mm)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eShipping weight:\u003c\/td\u003e\r\n\u003ctd\u003e1.1lb (0.5kg)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePower:\u003c\/td\u003e\r\n\u003ctd\u003ePassive, no power required\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConditions:\u003c\/td\u003e\r\n\u003ctd\u003eFor use in dry locations only between 5°C and 40°C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWarranty:\u003c\/td\u003e\r\n\u003ctd colspan=\"2\"\u003eRadial 3-year, transferable\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43086785151019,"sku":"RAD-R800 8029","price":102.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/catapult_mini-34-right-768x501_1__94388.1682435740.1280.1280.jpg?v=1775683613"},{"product_id":"radial-eng-catapult-rack-tx","title":"Radial Eng Catapult Rack TX","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRackmount Cat 5 Analog Audio Distribution\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Catapult Rack is a passive audio snake that allows you to send or receive 12 channels of analog audio over standard Cat 5 or Cat 6 Ethernet cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnalog audio over Cat 5 wiring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Catapult Rack TX and RX act like a typical multi-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect one shielded Cat 5 cable for every four channels of audio and deliver it to any other Radial Catapult module – it will utilize the analog conductors in the cable to deliver four balanced audio lines to any destination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 Rackspace, 3 times the channel count\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Catapult Rack units operate like three modules in one chassis. Since each Cat 5 Ethernet cable can carry four channels, the 12 XLRs on each Catapult Rack are split into three banks, each with their own noise-eliminating ground lift switch and RJ45 Ethernet jacks on the rear panel. You can use three Ethernet cables to connect all 12 channels to a single location, or split them off to any of the Radial Catapult stage boxes, providing you with a fully customizable audio snake system that can connect multiple destinations at once and even include transformer isolation where needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRugged and flexible\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Catapult Rack TX and RX are built to handle the toughest pro touring environments, and like all Catapult modules they include Neutrik etherCON RJ45 connectors. These allow you to use compatible cables with a protective metal shell around the Ethernet connector that protects against accidental disconnection while also preventing damage to the RJ45 plug itself. Another useful feature on the Catapult Rack is the addition of reversible rack ears, which can be mounted on either side of the chassis, so you can have the XLRS or the Ethernet connections facing outwards as necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStraight-wire passive operation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCatapult Rack modules require no power to operate, and since they keep the signal in the analog realm, no digital conversion is necessary. Straight-wire connection from each bank of XLRs to the RJ45 connector on a Cat 5 cable ensures that your audio passes through without coloration or distortion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStraight-wire passive operation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCatapult Rack modules require no power to operate, and since they keep the signal in the analog realm, no digital conversion is necessary. Straight-wire connection from each bank of XLRs to the RJ45 connector on a Cat 5 cable ensures that your audio passes through without coloration or distortion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDistribute 12 channels of balanced audio over three Cat 5 cable lines\u003c\/li\u003e\n\u003cli\u003eEasily combines with any other Radial Catapult modules\u003c\/li\u003e\n\u003cli\u003eRobust steel enclosure and locking Neutrik etherCON connectors\u003c\/li\u003e\n\u003cli\u003eReversible rack ears for optimal configuration with any setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudio circuit type: Passive RJ45 to XLR\u003c\/li\u003e\n\u003cli\u003eFrequency response: 10Hz - 100Hz, ±0.05dB\u003c\/li\u003e\n\u003cli\u003eDynamic range: 136dB re +20dBu, 22kHz BW\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion: \u0026lt;0.0003% @ +4dBu, 20Hz - 20kHz\u003c\/li\u003e\n\u003cli\u003eSignal to Noise: \u0026gt;114dB re +4dBu, 22kHz BW\u003c\/li\u003e\n\u003cli\u003eMaximum Input: +20dBu\u003c\/li\u003e\n\u003cli\u003eCross Talk: -130dB between channels @ 1kHz, +4dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGround lift\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Connectors: XLR, RJ45 (model dependant)\u003c\/li\u003e\n\u003cli\u003eOutput Connectors: XLR, RJ45 (model dependant)\u003c\/li\u003e\n\u003cli\u003eExtras: Reversible rack ears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstruction: 12-gauge steel faceplate, 18-gauge steel chassis\u003c\/li\u003e\n\u003cli\u003eFinish: Durable Powder Coat\u003c\/li\u003e\n\u003cli\u003eSize (L x W x D): L: 19\" x H: 1.75\" x D: 3.25\"\u003c\/li\u003e\n\u003cli\u003eWeight: 3.06lbs (1.39kg)\u003c\/li\u003e\n\u003cli\u003ePower: Passive, no power required\u003c\/li\u003e\n\u003cli\u003eConditions: For use in dry locations only between 5°C and 40°C\u003c\/li\u003e\n\u003cli\u003eWarranty: Radial 3-year, transferable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":43086785609771,"sku":"RAD-R800 8039","price":247.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/6dceeefd15MBDbxeLCVjHX6I9T2f0HzVJFgJpZiA.wm-dw_b97b2c85-d201-44db-bab3-ec7df54f17e4.webp?v=1775073323"},{"product_id":"art-arts8","title":"ART ARTS8","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ART S8 can be used to split eight balanced low impedance microphone signals into sixteen balanced low impedance microphone signals (eight pairs).\u003c\/p\u003e\n\u003cp\u003eEach channel of the S8 provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct outputs to the main or Front-of-House mixer, and the second isolated outputs being sent to a monitor or recording mixer. The direct outputs pass phantom power from the main mixer to the microphones for use with condenser microphones.\u003c\/p\u003e\n\u003cp\u003eThe S8 includes a ground-lift switch on each isolated output to reduce noise due to ground loops between connected equipment. For versatility the S8 also features an attenuator pad switch on each input that can be used to connect preamplified signals to the two microphone-level outputs on each channel. Typical preamplified signals would originate from instrument preamplifiers, mixers, keyboards, et cetera.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal solution for splitting microphone sources to feed multiple mixing consoles\u003c\/li\u003e\n\u003cli\u003eFully transformer isolated\u003c\/li\u003e\n\u003cli\u003ePasses phantom power from main mixer\u003c\/li\u003e\n\u003cli\u003eIndividual ground lift on each channel\u003c\/li\u003e\n\u003cli\u003eIndividual pad switch on each channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance: \u0026gt; 1.1k Ω @ 1kHz (Typical)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: -1.4dBu @20Hz \/ +3.5dBu @30Hz \/ +9.4dBu @50Hz\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: \u0026lt;255 Ω @ 1kHz (Typical)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: \u0026lt;0.1% From 45Hz To 20kHz @ -15Dbu Input\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20Hz to 20kHz\u003c\/li\u003e\n\u003cli\u003eCMRR: \u0026gt; 105dB @60Hz \/ Greater Than 80dB @3kHz\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886849622059,"sku":"ART-ARTS8","price":244.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/patchbays-s8-front__62902.1725433532.1280.1280.jpg?v=1775672729"},{"product_id":"art-arts8-3way","title":"ART ARTS8-3WAY","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ​S8-3WAY​ eight channel three way microphone splitter is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals have to go to multiple mix locations.\u003c\/p\u003e\n\u003cp\u003eEach channel provides one XLR input, one XLR direct output with two additional transformer isolated XLR outputs for a total of 3 balanced outputs from each single microphone input signal.\u003c\/p\u003e\n\u003cp\u003eTypical uses would include sending 8 direct signals through the ​S8-3WAY​ to a main Front-of-house mixer, with additional feeds going to a monitor mix station while transformer balanced isolated feeds are sent to remote recording desk or used for a broadcast feed.\u003c\/p\u003e\n\u003cp\u003eThe ART ​S8-3WAY​ features the same high-quality musical sounding transformers used in the popular ART ​S8​, and is housed in a standard 1U space rack-mountable steel chassis designed for years of reliable operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality passive interface\u003c\/li\u003e\n\u003cli\u003eEight high performance transformers\u003c\/li\u003e\n\u003cli\u003eOne direct and two transformer isolated output per channel\u003c\/li\u003e\n\u003cli\u003eBalanced XLR input and 3 balanced XLR per channel\u003c\/li\u003e\n\u003cli\u003eExtremely wide frequency response\u003c\/li\u003e\n\u003cli\u003eExtremely low voltage insertion loss\u003c\/li\u003e\n\u003cli\u003eReversible rack ears for added system flexibility\u003c\/li\u003e\n\u003cli\u003eLive Sound, Permanent\/Fixed install, Studio applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance: \u0026gt; 1.1k Ω @ 1kHz (Typical)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: -1.4dBu @20Hz \/ +3.5dBu @30Hz \/ +9.4dBu @50Hz\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: \u0026lt;255 Ω @ 1kHz (Typical)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: \u0026lt;0.1% From 45Hz To 20kHz @ -15Dbu Input\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20Hz to 20kHz\u003c\/li\u003e\n\u003cli\u003eCMRR: \u0026gt; 105dB @60Hz \/ Greater Than 80dB @3kHz\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886849654827,"sku":"ART-ARTS8-3WAY","price":261.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/patchbays-s8-3way-front__36941.1725434938.1280.1280.jpg?v=1775672732"},{"product_id":"art-avdibox","title":"ART AVDIBOX","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AV Direct is the ideal input solution for any application where stereo iPods, Laptop computers, consumer DVD players, Consumer HiFi equipment or video machines have to be connected to a single XLR microphone level input. Unlike standard gender bender cables or DI boxes, the AV Direct can accept virtually any input connection and output level (including amplified speaker outputs) and offers remote level control, ideal for setting the volume of your component at the source, rather than in and AV room, audio closet or installation rack.\u003c\/p\u003e\n\u003cp\u003eThe AV Direct has stereo RCA, 1\/8th inch and 1\/4-inch TRS line level inputs, as well as a 1\/4-inch and bare wire pressure clip speaker level inputs. A switchable 4.8kHz high cut filter, ground lift and variable level control allow the AV Direct to effectively filter out any extraneous unwanted noise while offering variable volume control at source. The speaker level inputs are heavily padded and transformer isolated from the XLR output, allowing amplified speaker level (up to 100 watts @ 8 ohms) to be tapped off, and sent to a microphone level input. A 20Hz to 20kHz frequency response ensures the AV Direct will function seamlessly with any high quality audio source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTransformer isolated XLR microphone level output\u003c\/li\u003e\n\u003cli\u003e20 to 20,000Hz Frequency Response\u003c\/li\u003e\n\u003cli\u003eStereo RCA, 1\/8th-inch \u0026amp; 1\/4-inch TRS line level inputs\u003c\/li\u003e\n\u003cli\u003e1\/4-inch \u0026amp; Pressure Clip Speaker level inputs\u003c\/li\u003e\n\u003cli\u003eVariable Level Control\u003c\/li\u003e\n\u003cli\u003eSwitchable 4.8kHz high cut filter\u003c\/li\u003e\n\u003cli\u003eGround Lift\u003c\/li\u003e\n\u003cli\u003eBalanced 150 ohm output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 20Hz to 20kHz +\/-1dB\u003c\/li\u003e\n\u003cli\u003eLine Level Inputs: 1\/8 – inch TRS 1\/4 – inch TRS, Stereo RCA\u003c\/li\u003e\n\u003cli\u003eOther Inputs: 1\/4 – inch \u0026amp; Pressure post Speaker Level Inputs\u003c\/li\u003e\n\u003cli\u003eMax Speaker Input: 100 W rated @ 8 Ω\u003c\/li\u003e\n\u003cli\u003eOutput: XLR balanced\u003c\/li\u003e\n\u003cli\u003eControls: Gain Control, Ground Lift, High – Cut Filter\u003c\/li\u003e\n\u003cli\u003eActive or Passive: Passive\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 150 Ω nominal @ 1kHz\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.85″H x 4.6″W x 4.4″D (47mm x 117mm x 112mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 1.0 lb (4.6 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886849785899,"sku":"ART-AVDIBOX","price":56.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/direct-boxes-avdirect-front-angle__29153.1725437636.1280.1280.jpg?v=1775672731"},{"product_id":"art-btdi","title":"ART BTDI","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMake your professional audio devices Bluetooth compatible with the ART BT-DI,  a rugged and flexible Bluetooth Audio DAC.   The BT-DI is designed to provide a reliable Bluetooth interface from computers, phones, and legacy  Bluetooth devices to any installation.  Working as a remote extension of your mixer and mic outputs, the BT-DI utilizes phantom power, so an external power supply is not required.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth 5.0 receiver\u003c\/li\u003e\n\u003cli\u003eExternal antenna for long-range operation\u003c\/li\u003e\n\u003cli\u003eTransformer isolated XLR outputs\u003c\/li\u003e\n\u003cli\u003eHeadphone out\u003c\/li\u003e\n\u003cli\u003eSelectable fixed\/external USB supply OR Phantom Power\u003c\/li\u003e\n\u003cli\u003eHeadphone can be summed Mono\u003c\/li\u003e\n\u003cli\u003eCompact rugged package, extruded chassis\u003c\/li\u003e\n\u003cli\u003eDesigned and developed in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMain Output Connections: XLR (2) main output, transformer\u003c\/li\u003e\n\u003cli\u003ecoupled, switchable ground.\u003c\/li\u003e\n\u003cli\u003eMain Output Impedance: 300 Ohms.\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level: 30 dBu balanced Main output,\u003c\/li\u003e\n\u003cli\u003e0 dBu Headphone output.\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio: -90dB unweighted typical.\u003c\/li\u003e\n\u003cli\u003eTHD \u0026lt;0.05% typical\u003c\/li\u003e\n\u003cli\u003eBluetooth Version: 5.0, up to 50m, Class 2\u003c\/li\u003e\n\u003cli\u003edevice (BDR\/EDR)\u003c\/li\u003e\n\u003cli\u003eSupported Audio: CODEC’s SBC, AAC\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 5V USB (80ma) or +48V\u003c\/li\u003e\n\u003cli\u003ePhantom power w\/both XLR’s\u003c\/li\u003e\n\u003cli\u003eDimensions (HxWxD: 1.6-inch x 5.0-inch x 5.5-inch\u003c\/li\u003e\n\u003cli\u003e(36 x 126 x 140 mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 2.0 lbs. \/ 0.91 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886850703403,"sku":"ART-BTDI","price":112.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/ART-BTDI-Front-1140x641__07174.1725531212.1280.1280.jpg?v=1775686802"},{"product_id":"art-coolswitchpro","title":"ART COOLSWITCHPRO","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ART COOLSwitchPro A\/B-Y Switch with Isolation is a handy foot-operated box that lets you switch an instrument signal (guitar, bass, or keyboard) to either of two amplifiers or amp channels, A or B. The “Y” function sends the input signal to both the A and B outputs in parallel.\u003c\/p\u003e\n\u003cp\u003eSwitch-selectable features on the B channel add versatility to the basic switching functions. A high quality audio transformer can be switched in to provide isolation between the input and output signals. This helps reduce the danger of shock when the amplifiers are at a different potential. Also, this isolation, along with a ground lift function, helps to eliminate the hum caused by ground loops. A phase reverse function lets you make sure both amps are in phase.\u003c\/p\u003e\n\u003cp\u003eThe ART COOLSwitchPro is completely passive with true bypass and is housed in a rugged, stable case with industrial-grade footswitches spaced for easy operation. It will provide many years of reliable service, whether on stage or in the studio.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSends your signal to either of two amps or both with foot control\u003c\/li\u003e\n\u003cli\u003eSwitchable transformer isolation helps prevent shocks and remove hum\u003c\/li\u003e\n\u003cli\u003eSwitchable phase invert helps make sure both amps are properly in phase\u003c\/li\u003e\n\u003cli\u003eSwitchable ground lift helps remove another potential source of hum\u003c\/li\u003e\n\u003cli\u003eAlways connected “thru” jack for use with a tuner or other piece of gear\u003c\/li\u003e\n\u003cli\u003eCan be used in reverse to select between two instruments connected to one amp\u003c\/li\u003e\n\u003cli\u003ePassive operation requires no power and provides true bypass\u003c\/li\u003e\n\u003cli\u003eRugged aluminum case sits flat and optimum footswitch spacing allows easy operation\u003c\/li\u003e\n\u003cli\u003ePerfect for stage or studio use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886850932779,"sku":"ART-COOLSWITCHPRO","price":58.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/inst-accessories-coolswitchpro-top__66541.1725443299.1280.1280.jpg?v=1775672733"},{"product_id":"art-cx311","title":"ART CX311","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CX311 two-way stereo crossover network has an additional subwoofer output for low-end frequency reinforcement. It employs 24dB\/octave state-variable, Fourth-order Linkwitz-Riley filters that guarantee properly phased outputs at all frequencies which is optimal for the proper acoustic summing of common signals from adjacent drivers in the crossover region.\u003c\/p\u003e\n\u003cp\u003eCX311 Highlights:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEach channel features independent high and low output level controls and a crossover frequency rotary control which covers a wide range (250hz to 6khz).\u003c\/li\u003e\n\u003cli\u003eAll three outputs have a 30 cycle low cut switch to eliminate low-end rumble.\u003c\/li\u003e\n\u003cli\u003eSubwoofer features an independent output level and rotary control for frequencies in the 50hz to 250hz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStereo two-way crossover\u003c\/li\u003e\n\u003cli\u003eSubwoofer output\u003c\/li\u003e\n\u003cli\u003eFourth-order Linkwitz-Riley filters (24dB \/ octave state-variable)\u003c\/li\u003e\n\u003cli\u003eIndependent high and low output level controls\u003c\/li\u003e\n\u003cli\u003eCrossover frequency rotary control (250hz to 6khz)\u003c\/li\u003e\n\u003cli\u003e30 cycle low cut switch\u003c\/li\u003e\n\u003cli\u003eIndependent output level and rotary control (50hz to 250hz)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886850965547,"sku":"ART-CX311","price":109.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/crossover-cx311-front__39253.1725443573.1280.1280.jpg?v=1775672734"},{"product_id":"art-dadb","title":"ART DADB","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ART dADB dual active direct box acts as two independent, high quality active interfaces for connecting instrument, line, or speaker level signals to balanced inputs. The high impedance ¼-inch inputs are buffered and converted by extremely low noise active electronics to deliver isolated, balanced, low impedance outputs.\u003c\/p\u003e\n\u003cp\u003eThe dADB delivers an extremely flat and wide frequency response even at high input levels, making it a virtually acoustically transparent DI solution.\u003c\/p\u003e\n\u003cp\u003eInput attenuation on each channel allows for a wide range of source signal levels. Independent parallel thru jacks allow for tapping the signal chains. A Ground Lift on each channel allows for totally separate the input and output signal grounds to isolate two systems when required, thus reducing hum and ground-loop noise.\u003c\/p\u003e\n\u003cp\u003eSwitchable low pass Bessel filters eliminate high frequency interference. Operating outside of the audio range these complex and effective filter circuits are primarily intended to eliminate radio frequency interference before it gets into the main system. They effectively reduce digital computer noise making the dADB the ideal DI solution for laptops, computer workstations and peripherals when used in stereo PA applications.\u003c\/p\u003e\n\u003cp\u003eThe dADB’s active circuitry is powered by phantom power or by an internal 9V battery when external power is not available. Low current draw (less than 7.5 mA) should provide more than 100 hours of operation with a new battery (alkaline recommended).\u003c\/p\u003e\n\u003cp\u003eThe compact black all steel case and active design ensure unmatched long-term reliability in Live Sound, Permanent\/Fixed Install, D.J., or virtually any PA application.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully Active Design\u003c\/li\u003e\n\u003cli\u003eOperates on Phantom Power or 9V Battery\u003c\/li\u003e\n\u003cli\u003eConverts High-Impedance Balanced \/ Unbalanced Inputs Into 600 ohm Balanced Outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable Input Attenuation (0, -20, -40 dB)\u003c\/li\u003e\n\u003cli\u003eIndependently Switchable Low Pass Filter on each Channel\u003c\/li\u003e\n\u003cli\u003eIndependently Switchable Phase Invert on each Channel\u003c\/li\u003e\n\u003cli\u003eIndependently Switchable Ground Lift on each Channel\u003c\/li\u003e\n\u003cli\u003e1\/4-inch TRS Connector Inputs and Thru Connections\u003c\/li\u003e\n\u003cli\u003eXLR Connectors for Balanced Outputs\u003c\/li\u003e\n\u003cli\u003eRugged Steel Case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 10 Hz – 100 kHz +\/- 0.5 dB @ +0 dBu\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: \u0026lt;.05% (typical)\u003c\/li\u003e\n\u003cli\u003eDynamic Range: \u0026gt; 100 dB (typical)\u003c\/li\u003e\n\u003cli\u003eChannel Separation: \u0026gt; 80 dB (typical)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: +4, +24, +44 dBu (depending on attenuator setting)\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level: +6 dBu (battery powered), +14 dBu (phantom powered)\u003c\/li\u003e\n\u003cli\u003eInput Connections: 1\/4″ TRS balanced \/ unbalanced (2), 470k Ω\u003c\/li\u003e\n\u003cli\u003eThru Connections: 1\/4″ TRS (2)\u003c\/li\u003e\n\u003cli\u003eOutput Connections: XLR male balanced (2), \u0026lt;600 Ω\u003c\/li\u003e\n\u003cli\u003eInput Attenuation: Switchable (0dB, -30dB)\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 9V @ 7.5 mA (battery, alkaline recommended) \/ 18-48V DC @ 6.4 mA (phantom power , per channel)\u003c\/li\u003e\n\u003cli\u003eDimensions: 2″ x 5″ x 5.75″ (51mm x 127mm x 146mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 2.7 lbs (1.22 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886850998315,"sku":"ART-DADB","price":52.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/direct-boxes-dadb-angle__55309.1725443691.1280.1280.jpg?v=1775672735"},{"product_id":"art-djpre-2","title":"ART DJPRE-2","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePerhaps its most exciting feature is a low-end roll-off switch that cuts some of the boominess from older distorted vinyl, or a turntable’s drive rumble, without cutting much out of the mix. On the front of the device, there’s a centrally located gain knob (up to +10 dB), with a convenient clip indicator, as well as the low-cut switch and input cap button. It’s a lot of features for such a good price.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe DJ PRE II (formerly named the “Phono MicroPRE”) acts as an interface between your turntable and your audio recording \/ playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal\/clip LED allow you to optimize the preamp’s gain for a wide range of input sources. The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. The line output jacks are low impedance and can be used with any sound card.\u003c\/p\u003e\n\u003cp\u003eHoused in an all aluminum black anodized case, the DJ PRE II can be powered by a wide variety of external supplies. If you need to amplify and EQ your vinyl records to interface with your audio workstation, sound card, home stereo system or main monitor system, the DJ PRE II gives you flawless audio reproduction in a rugged and reliable package.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh accuracy\/low noise preamp\u003c\/li\u003e\n\u003cli\u003eSwitchable low cut rumble filter\u003c\/li\u003e\n\u003cli\u003eVariable preamp gain\u003c\/li\u003e\n\u003cli\u003eSignal present\/clip indicator\u003c\/li\u003e\n\u003cli\u003eSelectable cartridge loading\u003c\/li\u003e\n\u003cli\u003eRCA preamp outputs\u003c\/li\u003e\n\u003cli\u003eHeavy duty extruded chassis\u003c\/li\u003e\n\u003cli\u003eDesigned and developed in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 10Hz -50KHz, +\/-.5dB\u003c\/li\u003e\n\u003cli\u003ePhono EQ Standard: Conforms to RIAA Curve\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: .01% Typical @ 1kHz\u003c\/li\u003e\n\u003cli\u003eHum and Noise: \u0026gt; 90dB below clipping\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 47k Ω in Parallel with Either 100pF or 200pF\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: 40mVrms @1kHz\u003c\/li\u003e\n\u003cli\u003eMaximum Gain: 45dB @1KHz\u003c\/li\u003e\n\u003cli\u003eIn \/ Out Connections: RCA\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level: +6dBu (1.4Vrms)\u003c\/li\u003e\n\u003cli\u003eFilter Type\/Response: Switchable, Low Cut,\u003c\/li\u003e\n\u003cli\u003e-3dB @ 22Hz\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 7-12V DC or 9-12V AC @150mA\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.85″H x 4.6″W x 4.5″D (47mm x 117mm x 114mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 1.25 lbs (0.57kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886851063851,"sku":"ART-DJPRE-2","price":41.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/preamps-processors-djpre-II-front-angle__32062.1725443800.1280.1280.jpg?v=1775672735"},{"product_id":"art-dpdb","title":"ART DPDB","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe new dPDB™ Passive Direct Box features two high-quality direct boxes in one portable enclosure. It is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs.\u003c\/p\u003e\n\u003cp\u003eIt also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer. The dPDB™ features switchable Input Attenuation (0 dB, -20dB, -40dB), a 50k ohm Instrument Input, 50k ohm Parallel Link jack, a 600 ohm XLR Output Jack, and a switchable Ground Lift.\u003c\/p\u003e\n\u003cp\u003eThe dPDB excels at impedance matching and improving the sound of any instrument plugged into it. The ART dPDB™ is a must-have in any audio tool kit. Enclosed in a rugged steel chassis, it is designed and manufactured to the highest standards to provide years of quiet, reliable performance. dPDB™\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eElectric guitar and bass pick up output signals – The high impedance signal from a guitar or bass guitar pickup is translated by the dPDB™ into a low impedance balanced signal required by mixing consoles.\u003c\/li\u003e\n\u003cli\u003eKeyboards and line level signals – The dPDB™ automatically balances and matches the line level outputs of modern electronic keyboards. If you are using a multiple keyboard setup and your keyboards are all plugged into a single instrument amplifier, the dPDB™ can be used to replace individual direct boxes. Simply send the output of the instrument amplifier to the dPDB™ and then to the console (instead of a separate DI box for each keyboard).\u003c\/li\u003e\n\u003cli\u003eDJ console output signals – DJ mixers often supply only an unbalanced -10dB signal. The dPDB™ converts this signal to a balanced line level signal before it reaches the console, while providing a convenient method of connector transition with the capability to run long cables.\u003c\/li\u003e\n\u003cli\u003eSpeaker level signals – The dPDB’s ability to accept speaker level inputs from a power amplifier’s output allows post-amplifier, post eq and effects signals to be fed directly to the console. In this manner, a particular effect or amplifier sound can be sent directly to the mix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 10 Hz – 50 kHz +\/- 0.5dB @ +4dBu\u003c\/li\u003e\n\u003cli\u003eOutput Connections: 600 Ω XLR Output Jack\u003c\/li\u003e\n\u003cli\u003eGround Lift: Switchable\u003c\/li\u003e\n\u003cli\u003eInput Attenuation: Switchable (0dB, -20dB, -40dB)\u003c\/li\u003e\n\u003cli\u003eInstrument Input: 50k Ω\u003c\/li\u003e\n\u003cli\u003eParallel Link Jack: 50k Ω\u003c\/li\u003e\n\u003cli\u003eDimensions: 5.75″ x 5″ x 2″\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886851162155,"sku":"ART-DPDB","price":35.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/direct-boxes-dpdb-top__37173.1725444087.1280.1280.jpg?v=1775672735"},{"product_id":"art-drp","title":"ART DRP","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ART Dual RP Mic Preamp is the ideal solution for increasing the performance of your ribbon and dynamic microphones. This two-channel preamp brings out all of the nuances of your mic before running into your recording interface or mixer via long cable runs.\u003c\/p\u003e\n\u003cp\u003eWith the Dual RP you can tailor the loading on the mic through the variable impedance controls. The discrete preamp circuitry inside is designed for low noise and transparent operation. The balanced output drives long cable runs with ease allowing you to place the preamp as close as possible to the mic before picking up any noise or interference.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSwitchable low cut filter 100 Hz low cut filter\u003c\/li\u003e\n\u003cli\u003eVariable impedance control (150 ohms – 10k ohms)\u003c\/li\u003e\n\u003cli\u003eAdds low-noise, clean gain (28dB @ 10k ohms, 20dB @ 600 ohms)\u003c\/li\u003e\n\u003cli\u003eRuns off +48V Phantom power supply\u003c\/li\u003e\n\u003cli\u003eLow THD discrete circuitry (\u0026lt;0.002% @ 1kHz typ.)\u003c\/li\u003e\n\u003cli\u003eBalanced outputs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886851194923,"sku":"ART-DRP","price":41.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/dual-rp-front__41796.1725444188.1280.1280.jpg?v=1775672736"},{"product_id":"art-dti","title":"ART DTI","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DTI (Dual Transformer\/Isolater) is a high quality totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels while an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of maintaining signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 ohms to 100k ohms.\u003c\/p\u003e\n\u003cp\u003eWhat further sets the DTI apart from other lesser isolation boxes is its connection versatility. We have provided XLR, 1\/4″ phone, and RCA type phono connections on all inputs and outputs. This allows it to easily fit into virtually any audio system and be the clean patch point between all types of systems. Whether you need an interface between a computer based audio workstation and your monitor system, isolation on long cable runs in a fixed installation, isolation of a signal source from your recording equipment, or in many cases, just a safer connection between two audio systems, the DTI can accommodate. The compact black anodized all aluminum case and it’s passive design allow the DTI to provide years of trouble free service in Live Sound, Permanent\/Fixed Install, D.J., and virtually any PA application. It’s full feature set, rugged construction, and high-end specifications make the DTI the obvious choice.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIsolates Components in Sound Systems to Eliminate Ground Issues\u003c\/li\u003e\n\u003cli\u003eHigh Quality Transformers\u003c\/li\u003e\n\u003cli\u003eXLR, 1\/4-inch and RCA Inputs and Outputs\u003c\/li\u003e\n\u003cli\u003eRugged Anodized Aluminum Case\u003c\/li\u003e\n\u003cli\u003ePassive Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 10Hz-50kHz +\/-.5dB@+4dBu\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: .01% Typical @ 1kHz, +18dBu, \u0026lt;.05% @ 100Hz, +24dBu\u003c\/li\u003e\n\u003cli\u003eInsertion Loss: .4dB@100k Ω load,\u003c\/li\u003e\n\u003cli\u003e5dB @ 600 Ω load\u003c\/li\u003e\n\u003cli\u003eInput Connectors: XLR-F Balanced,1\/4-inch TRS Balanced \/ Unbalanced, and RCA Jacks\u003c\/li\u003e\n\u003cli\u003eOutput Connectors: XLR-M Balanced, 1\/4-inch TRS Balanced \/ Unbalanced and RCA Jacks\u003c\/li\u003e\n\u003cli\u003ePower Requirements: Passive\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.75″H x 4.2″W x 3.5″D (44.5mm x 107mm x 89mm)\u003c\/li\u003e\n\u003cli\u003eWeight: .75 lbs (0.34kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886851227691,"sku":"ART-DTI","price":56.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/utilities-dti-front__45890.1725444319.1280.1280.jpg?v=1775672737"},{"product_id":"art-dualrdb","title":"ART DUALRDB","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Dual RDB is the ideal interface solution for any application where stereo or dual line level signals from recording interfaces, computers, mixers, iPods, consumer audio or video machines need to be connected to XLR microphone or ¼-inch instrument level inputs.\u003c\/p\u003e\n\u003cp\u003eThe unit has two high quality isolation transformers that prevent ground loops when connecting various systems together. The Dual RDB accepts 1\/4″ TRS and XLR line level inputs and outputs mic or instrument levels. The Dual RDB’s variable level controls allow volume control to be set at the source rather than in the studio, AV room, audio closet or installation rack. A 20Hz to 20kHz frequency response ensures the Dual RDB will function transparently with any high quality audio source\u003c\/p\u003e\n\u003cp\u003eApplications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRe-amping interface for multiple amps\u003c\/li\u003e\n\u003cli\u003eStereo\/Dual direct box\u003c\/li\u003e\n\u003cli\u003eVariable Input pad for mic or instrument inputs\u003c\/li\u003e\n\u003cli\u003eStereo Audio\/Video interface to low level inputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRe-amping interface for multiple amps\u003c\/li\u003e\n\u003cli\u003eStereo\/Dual direct box\u003c\/li\u003e\n\u003cli\u003eVariable Input pad for mic or instrument inputs\u003c\/li\u003e\n\u003cli\u003eStereo Audio\/Video interface to low level inputs\u003c\/li\u003e\n\u003cli\u003eDual 1\/4-inch TRS and XLR balanced line level inputs\u003c\/li\u003e\n\u003cli\u003eTransformer isolated XLR balanced microphone level outputs\u003c\/li\u003e\n\u003cli\u003eTransformer isolated 1\/4-inch TRS balanced instrument level outputs\u003c\/li\u003e\n\u003cli\u003e20Hz to 20kHz Frequency Response\u003c\/li\u003e\n\u003cli\u003eVariable Level Controls with Mute\u003c\/li\u003e\n\u003cli\u003eChannel Two source selectable between Channel One or Channel Two Input\u003c\/li\u003e\n\u003cli\u003eChannel Two output phase switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 20 Hz – 20 kHz, ± 0.5 dB @ +4 dBu\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: .01% @ 1kHz, +18 dBu\u003c\/li\u003e\n\u003cli\u003e\u0026lt;.05% @ 100Hz, +18dBu\u003c\/li\u003e\n\u003cli\u003eChannel Separation: \u0026gt; 80 dB (typical)\u003c\/li\u003e\n\u003cli\u003eInput Connections: 1\/4″ TRS balanced,\u003c\/li\u003e\n\u003cli\u003eXLR balanced female\u003c\/li\u003e\n\u003cli\u003eThru Connections: 1\/4″ TRS balanced,\u003c\/li\u003e\n\u003cli\u003eXLR balanced female\u003c\/li\u003e\n\u003cli\u003eInsertion Loss: -20dB @100k Ω load,\u003c\/li\u003e\n\u003cli\u003e-25dB @600 Ω load\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.85″H x 4.6″W x 3.9″D (47mm x 117mm x 99mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.88 lbs (0.40 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886851260459,"sku":"ART-DUALRDB","price":58.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/direct-boxes-dualrdb-front__49037.1725445284.1280.1280.jpg?v=1775672737"},{"product_id":"art-dualxdirect","title":"ART DUALXDIRECT","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1\/4″ and XLR inputs (provided via “combo” jacks) are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.\u003c\/p\u003e\n\u003cp\u003eThe input ATTENUATOR switches allow for a wide range of signal levels and the input THRU jacks allow for tapping off of your signal chain. The GROUND LIFT switches let you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.\u003c\/p\u003e\n\u003cp\u003eThe DUALXDirect”s active circuitry is powered by phantom voltage from the OUTPUT connections or by an internal 9V battery, when external power is not available. When powered by a battery, it draws less than 7.5 mA which should provide more than 100 hours of operation with a new battery (alkaline recommended). If phantom power is available, then the DUALXDirect will automatically draw its power from the external source. The POWER ON\/OFF switch lights more dimly when the unit is running off of the battery, lights more brightly when it is running off of phantom power, and is off when the unit is inactive.\u003c\/p\u003e\n\u003cp\u003eThe compact black-anodized all aluminum case and it’s active design allow the DUALXDirect to provide years of trouble free service in Live Sound, Permanent\/Fixed Install, D.J., and virtually any PA application. It’s full feature set, rugged construction, and high-end specifications make the DUALXDirect the obvious choice.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully Active Design\u003c\/li\u003e\n\u003cli\u003ePhantom Voltage or 9v Battery Powered\u003c\/li\u003e\n\u003cli\u003eConverts High-Impedance Balanced \/ Unbalanced Inputs Into 600 ohm Balanced Outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable input attenuation (0, -20, -40 dB) Switchable low pass filter\u003c\/li\u003e\n\u003cli\u003eSwitchable phase invert\u003c\/li\u003e\n\u003cli\u003eSwitchable ground lift (fully isolates inputs from chassis and outputs)\u003c\/li\u003e\n\u003cli\u003e¼-Inch TRS | XLR Combi Jack Inputs\u003c\/li\u003e\n\u003cli\u003eRugged Extruded Aluminum Case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 10 Hz – 100 kHz, ± 0.5 dB @ +0 dBu\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: \u0026lt;.05% (typical)\u003c\/li\u003e\n\u003cli\u003eDynamic Range: \u0026gt;100 dB (typical)\u003c\/li\u003e\n\u003cli\u003eChannel Separation: \u0026gt; 80 dB (typical)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: +4, +34 dBu\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level: +6 dBu (battery powered), +14 dBu (phantom powered)\u003c\/li\u003e\n\u003cli\u003eInput Connections: ¼-inch TRS | XLR female balanced \/ unbalanced (2), 470k Ω\u003c\/li\u003e\n\u003cli\u003eThru Connections: ¼-inch TRS (2)\u003c\/li\u003e\n\u003cli\u003eOutput Connections: XLR male balanced (2), \u0026lt;600 Ω\u003c\/li\u003e\n\u003cli\u003eInput Attenuation: Switchable, (0, -30 dB)\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 9V @ 7.5 mA (battery,Alkaline recommended),\u003c\/li\u003e\n\u003cli\u003e18 – 48V DC @ 6.4 mA (phantom power, per channel)\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.85″H x 4.6″W x 3.9″D (47mm x 117mm x 99mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.84 lbs (0.38 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886851555371,"sku":"ART-DUALXDIRECT","price":52.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/direct-boxes-dualxdirect-angle__36625.1725445394.1280.1280.jpg?v=1775672737"},{"product_id":"art-dualzdirect","title":"ART DUALZDIRECT","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1\/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe input ATTENUATOR switches allow for a wide range of signal levels and the input THRU jacks allows for tapping off of your signal chain. The GROUND LIFT switches let you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhat further sets the DUALZDirect apart from other “DI” boxes are its extended features and versatility. We have added switchable low pass FILTERs that cut out all very high frequency interference. These Bessel filters on the outputs are placed out of the audio range and are primarily intended to reduce radio frequency interference before it gets into the main system. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe filters are very effective in reducing any digital computer noise artifacts when using the DUALZDirect as an interface between a computer-based audio workstation and your monitors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe PHASE INVERT switches, while not normally included with your “run of the mill” DI box, have been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe compact black-anodized all aluminum case and it’s passive design allow the DUALZDirect to provide years of trouble free service in Live Sound, Permanent\/Fixed Install, D.J., and virtually any PA application. It’s full feature set, rugged construction, and high-end specifications make the DUALZDirect the obvious choice.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully passive, high performance transformer design. No battery required.\u003c\/li\u003e\n\u003cli\u003eConverts 50k ohm inputs into 600 ohm balanced outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable input attenuation (0, -20, -40 dB) Switchable low pass filter\u003c\/li\u003e\n\u003cli\u003eSwitchable phase invert\u003c\/li\u003e\n\u003cli\u003eSwitchable ground lift (fully isolates inputs from chassis and outputs)\u003c\/li\u003e\n\u003cli\u003eRugged extruded aluminum case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 10 Hz – 50 kHz, ± 0.5dB @ +4 dBu\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: .01% Typical @ 1 kHz, +18 dBu\u003c\/li\u003e\n\u003cli\u003e\u0026lt;.05% @ 100 Hz,\u003c\/li\u003e\n\u003cli\u003e+18 dBu\u003c\/li\u003e\n\u003cli\u003eChannel Separation: \u0026gt; 80 dB (typical)\u003c\/li\u003e\n\u003cli\u003eInput Connections: 1\/4″ TRS Unbalanced (2), 50k Ω\u003c\/li\u003e\n\u003cli\u003eThru Connections: 1\/4″ TRS (2)\u003c\/li\u003e\n\u003cli\u003eOutput Connections: XLR Male Balanced (2), 600 Ω\u003c\/li\u003e\n\u003cli\u003eInput Attenuation: Switchable, (0 -20, -40dB)\u003c\/li\u003e\n\u003cli\u003eFilter Type \/ Response: Switchable, Low Pass, -3 dB @ 30 kHz\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.85″H x 4.6″W x 3.9″D (47mm x 117mm x 99mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.88 lbs (0.40 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886851588139,"sku":"ART-DUALZDIRECT","price":32.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/direct-boxes-dualzdirect-front-angle__97584.1725445500.1280.1280.jpg?v=1775672738"},{"product_id":"art-eq341","title":"ART EQ341","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ART EQ300 Series of graphic equalizers have been designed and engineered to extremely high standards for audio performance and functionality. These innovative, high-quality equalizers are perfect for virtually any audio application where precision frequency tailoring, reliable performance, rugged design and extremely silent processing is important. Rugged construction and solid audio performance make these equalizers particularly well suited to fixed installation as well as touring live sound systems.\u003c\/p\u003e\n\u003cp\u003eThe ART EQ 300 Series Applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMay be used in a variety of applications such as live sound, recording studios, instrument racks as well as any conventional fixed installation environment\u003c\/li\u003e\n\u003cli\u003eThe equalizer can be used wherever modification of the frequency contour of a sound is needed\u003c\/li\u003e\n\u003cli\u003eThe graphic equalizer is a powerful tool for solving a number of audio problems and creating interesting sound textures\u003c\/li\u003e\n\u003cli\u003ePatch the EQ between your mixing console and power amps to allow you to alter the overall mix to better match your environment\u003c\/li\u003e\n\u003cli\u003eUse the EQ between your monitor mixer and monitor power amps to aid in the removal of feedback inducing frequencies\u003c\/li\u003e\n\u003cli\u003ePatch into a channel insert to EQ one channel or track individually\u003c\/li\u003e\n\u003cli\u003eRun your instrument directly into the equalizer to enhance its sound before reaching a power amplifier or instrument amplifier.\u003c\/li\u003e\n\u003cli\u003ePatch into the effects loop of an instrument amplifier or between a preamp and power amp to have precise control over the complete sound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual Channel 15-Band Graphic Equalizer\u003c\/li\u003e\n\u003cli\u003eConstant-Q Filtering\u003c\/li\u003e\n\u003cli\u003eBalanced XLR, Active Balanced 1\/4″, and Unbalanced RCA Input and Output Connectors\u003c\/li\u003e\n\u003cli\u003e+\/- 6dB or +\/-12dB Level Adjustments\u003c\/li\u003e\n\u003cli\u003e20mm Center Detented Frequency Band Sliders\u003c\/li\u003e\n\u003cli\u003eIndependent Level and Bypass Controls Per Channel\u003c\/li\u003e\n\u003cli\u003eDesigned for Years of continuous, reliable performance\u003c\/li\u003e\n\u003cli\u003eRugged All Steel Construction\u003c\/li\u003e\n\u003cli\u003eOne Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChannel Separation: \u0026gt; 50dB\u003c\/li\u003e\n\u003cli\u003eControls: Power On\/Off Switch; L\/R Filter Range Switch; L\/R Bypass Switch; L\/R Level Control; Ground Lift Switch\u003c\/li\u003e\n\u003cli\u003eFilter Type: Constant Q – 3% center accuracy\u003c\/li\u003e\n\u003cli\u003eFrequency Bands: 2×15, 2\/3 octave, ISO spacing\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20Hz to 20kHz, +0.5dB\u003c\/li\u003e\n\u003cli\u003eIndicators: 6dB\/12dB Range LEDs; Bypass and Clip LEDs\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 20k Ω (bal), 15k Ω (unbal)\u003c\/li\u003e\n\u003cli\u003eInput\/Output Connections: Active balanced XLR and 1\/4″ TRS {XLR pin 2\/ 1\/4″ tip = Hot (+)} Unbalanced RCA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886851620907,"sku":"ART-EQ341","price":112.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/eq-eq341-front__48152.1725445626.1280.1280.jpg?v=1775672738"},{"product_id":"art-eq351","title":"ART EQ351","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ART EQ300 Series of graphic equalizers have been designed and engineered to extremely high standards for audio performance and functionality. These innovative, high-quality equalizers are perfect for virtually any audio application where precision frequency tailoring, reliable performance, rugged design and extremely silent processing is important. Rugged construction and solid audio performance make these equalizers particularly well suited to fixed installation as well as touring live sound systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe ART EQ 300 Series Highlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMay be used in a variety of applications such as live sound, recording studios, instrument racks as well as any conventional fixed installation environment\u003c\/li\u003e\n\u003cli\u003eThe equalizer can be used wherever modification of the frequency contour of a sound is needed\u003c\/li\u003e\n\u003cli\u003eThe graphic equalizer is a powerful tool for solving a number of audio problems and creating interesting sound textures\u003c\/li\u003e\n\u003cli\u003ePatch the EQ between your mixing console and power amps to allow you to alter the overall mix to better match your environment\u003c\/li\u003e\n\u003cli\u003eUse the EQ between your monitor mixer and monitor power amps to aid in the removal of feedback inducing frequencies\u003c\/li\u003e\n\u003cli\u003ePatch into a channel insert to EQ one channel or track individually\u003c\/li\u003e\n\u003cli\u003eRun your instrument directly into the equalizer to enhance its sound before reaching a power amplifier or instrument amplifier.\u003c\/li\u003e\n\u003cli\u003ePatch into the effects loop of an instrument amplifier or between a preamp and power amp to have precise control over the complete sound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Channel 31-Band Graphic Equalizer\u003c\/li\u003e\n\u003cli\u003eConstant-Q Filtering\u003c\/li\u003e\n\u003cli\u003eBalanced XLR, Active Balanced 1\/4″, and Unbalanced RCA Input and Output Connectors\u003c\/li\u003e\n\u003cli\u003e+\/- 6dB or +\/-12dB Level Adjustments\u003c\/li\u003e\n\u003cli\u003e20mm Center Detented Frequency Band Sliders\u003c\/li\u003e\n\u003cli\u003eIndependent Level and Bypass Controls Per Channel\u003c\/li\u003e\n\u003cli\u003eDesigned for Years of continuous, reliable performance\u003c\/li\u003e\n\u003cli\u003eRugged All Steel Construction\u003c\/li\u003e\n\u003cli\u003eOne Year Warranty   \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChannel Separation: \u0026gt; 50dB\u003c\/li\u003e\n\u003cli\u003eControls: Power On\/Off Switch; Filter Range Switch; Bypass Switch; Level Control; AC Voltage Selector; Ground Lift Switch\u003c\/li\u003e\n\u003cli\u003eFilter Type: Constant Q – 3% center accuracy\u003c\/li\u003e\n\u003cli\u003eFrequency Bands: 31, 1\/3 octave, ISO spacing\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20Hz to 20kHz, +0.5dB\u003c\/li\u003e\n\u003cli\u003eIndicators: 6dB\/12dB Range LEDs; Bypass and Clip LEDs\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 20k Ω (bal), 15k Ω (unbal)\u003c\/li\u003e\n\u003cli\u003eInput\/Output Connections: Active balanced XLR and 1\/4″ TRS {XLR pin 2\/ 1\/4″ tip = Hot (+)} Unbalanced RCA\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: +22dBm\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level: +18dBm (bal), +22dBm (unbal)\u003c\/li\u003e\n\u003cli\u003ePower: (Switchable) 95-130VAC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003ePower Consumption: 12 W\u003c\/li\u003e\n\u003cli\u003eRange: +\/-6dB or +\/-12dB selectable\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio: -94dB\u003c\/li\u003e\n\u003cli\u003eSlider Travel: 20mm w\/ positive center detent\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: 0.0001\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.75″H x 19″W x 8.5″D\u003c\/li\u003e\n\u003cli\u003eWeight: 4.5lbs (2.5kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886851653675,"sku":"ART-EQ351","price":112.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/eq-eq351-front__49479.1725445747.1280.1280.jpg?v=1775672738"},{"product_id":"art-eq355","title":"ART EQ355","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ART EQ300 Series of graphic equalizers have been designed and engineered to extremely high standards for audio performance and functionality. These innovative, high-quality equalizers are perfect for virtually any audio application where precision frequency tailoring, reliable performance, rugged design and extremely silent processing is important. Rugged construction and solid audio performance make these equalizers particularly well suited to fixed installation as well as touring live sound systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe ART EQ 300 Series Highlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMay be used in a variety of applications such as live sound, recording studios, instrument racks as well as any conventional fixed installation environment\u003c\/li\u003e\n\u003cli\u003eThe equalizer can be used wherever modification of the frequency contour of a sound is needed\u003c\/li\u003e\n\u003cli\u003eThe graphic equalizer is a powerful tool for solving a number of audio problems and creating interesting sound textures\u003c\/li\u003e\n\u003cli\u003ePatch the EQ between your mixing console and power amps to allow you to alter the overall mix to better match your environment\u003c\/li\u003e\n\u003cli\u003eUse the EQ between your monitor mixer and monitor power amps to aid in the removal of feedback inducing frequencies\u003c\/li\u003e\n\u003cli\u003ePatch into a channel insert to EQ one channel or track individually\u003c\/li\u003e\n\u003cli\u003eRun your instrument directly into the equalizer to enhance its sound before reaching a power amplifier or instrument amplifier.\u003c\/li\u003e\n\u003cli\u003ePatch into the effects loop of an instrument amplifier or between a preamp and power amp to have precise control over the complete sound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual Channel 31-Band Graphic Equalizer\u003c\/li\u003e\n\u003cli\u003eConstant-Q Filtering\u003c\/li\u003e\n\u003cli\u003eBalanced XLR, Active Balanced 1\/4″, and Unbalanced RCA Input and Output Connectors\u003c\/li\u003e\n\u003cli\u003eVariable High-Pass and Low-Pass Filters\u003c\/li\u003e\n\u003cli\u003e+\/- 6dB or +\/-12dB Level Adjustments\u003c\/li\u003e\n\u003cli\u003e20mm Center Detented Frequency Band Sliders\u003c\/li\u003e\n\u003cli\u003eIndependent Level and Bypass Controls Per Channel\u003c\/li\u003e\n\u003cli\u003eDesigned for Years of continuous, reliable performance\u003c\/li\u003e\n\u003cli\u003eRugged All Steel Construction\u003c\/li\u003e\n\u003cli\u003eOne Year Warranty   \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFilter Type: Constant Q – 3% center accuracy\u003c\/li\u003e\n\u003cli\u003eFrequency Bands: 31, 1\/3 octave, ISO spacing\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20Hz to 20kHz, +0.5dB\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 10Hz to 250Hz, 12dB\/oct\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 20k Ω (bal), 15k Ω (unbal)\u003c\/li\u003e\n\u003cli\u003eInput\/Output Connections: Active balanced XLR and 1\/4″ TRS {XLR pin 2, 1\/4″ tip = Hot (+)} Unbalanced RCA\u003c\/li\u003e\n\u003cli\u003eLow Pass Filter: 3kHz to 40kHz, 12dB\/oct\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: +22dBm\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level: +18dBm (bal), +22dBm (unbal)\u003c\/li\u003e\n\u003cli\u003ePower: (Switchable) 95-130VAC, 50\/60Hz, 22 W (USA)\u003c\/li\u003e\n\u003cli\u003eRange: +\/-6dB or +\/-12dB selectable\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio: -94dB\u003c\/li\u003e\n\u003cli\u003eSlider Travel: 20mm w\/ positive center detent\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: 0.0001\u003c\/li\u003e\n\u003cli\u003eWarranty: One Year\u003c\/li\u003e\n\u003cli\u003eDimensions: 3.5″H x 19″ W x 8.5″ D\u003c\/li\u003e\n\u003cli\u003eWeight: 9.0lbs (4.1kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886851686443,"sku":"ART-EQ355","price":197.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/eq-eq355-front__01860.1725445851.1280.1280.jpg?v=1775672739"},{"product_id":"art-loopswitch","title":"ART LOOPSWITCH","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompact Effects Loop-switcher \/ True Bypass\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd true bypass to vintage\/valuable effects without mods\u003c\/li\u003e\n\u003cli\u003eBypass multiple effects pedals with a single stomp\u003c\/li\u003e\n\u003cli\u003eAlso works as a simple A\/B selector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886851981355,"sku":"ART-LOOPSWITCH","price":35.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/ART-LOOPSWITCH-3__74114.1725442856.1280.1280.jpg?v=1775672743"},{"product_id":"art-lswitch","title":"ART LSWITCH","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LSwitch is a normally closed (NC) latching footswitch for use with various effect units or amplifiers that have an external footswitch jack. The onboard LED is supplied power by the switching circuitry on the host device; not all host units will necessarily power the LED properly, but the footswitch will work in spite of this.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with many effects or amps that can be controlled\u003cbr\u003eby an external footswitch\u003c\/li\u003e\n\u003cli\u003eCompact footprint takes up less pedalboard space than other\u003cbr\u003eproducts with the same function.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886852407339,"sku":"ART-LSWITCH","price":32.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/ART-LSWITCH-1__15347.1725443088.1280.1280.jpg?v=1775672744"},{"product_id":"art-patchin","title":"ART PATCHIN","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompact PedalboardPatch-bay \/ Insert Point\u003c\/p\u003e\n\u003cp\u003e• Self-switching return jack allows for multiple configurations\u003cbr\u003e• Easily patch extra effects into signal chain on cramped boards\u003cbr\u003e• Enables easy hook up of a large board in a pre\/post OR all pre\u003cbr\u003econfiguration (4-cable method or 2-cable method)\u003cbr\u003e• Can be used as a passive signal splitter\u003cbr\u003e• Use it to bring input and output connections to a convenient\u003cbr\u003elocation on cramped boards\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886852964395,"sku":"ART-PATCHIN","price":32.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/ART-PATCHIN-1__11659.1725446962.1280.1280.jpg?v=1775672749"},{"product_id":"art-pdb","title":"ART PDB","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PDB™ Passive Direct Box is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs.\u003c\/p\u003e\n\u003cp\u003eThe PDB™ also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePDB Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eElectric guitar and bass pick up output signals – The high impedance signal from a guitar or bass guitar pickup is translated by the PDB™ into a low impedance balanced signal required by mixing consoles.\u003c\/li\u003e\n\u003cli\u003eKeyboards and line level signals – The PDB™ automatically balances and matches the line level outputs of modern electronic keyboards. If you are using a multiple keyboard setup and your keyboards are all plugged into a single instrument amplifier, the PDB™ can be used to replace individual direct boxes. Simply send the output of the instrument amplifier to the PDB™ and then to the console (instead of a separate DI box for each keyboard).\u003c\/li\u003e\n\u003cli\u003eDJ console output signals – DJ mixers often supply only an unbalanced -10dB signal. The PDB™ converts this signal to a balanced line level signal before it reaches the console, while providing a convenient method of connector transition with the capability to run long cables.\u003c\/li\u003e\n\u003cli\u003eSpeaker level signals – The PDB’s ability to accept speaker level inputs from a power amplifier’s output allows post-amplifier, post eq and effects signals to be fed directly to the console. In this manner, a particular effect or amplifier sound can be sent directly to the mix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 10 Hz – 50 kHz +\/- 0.5dB @ +4dBu\u003c\/li\u003e\n\u003cli\u003eOutput Connections: 600 Ω XLR Output Jack\u003c\/li\u003e\n\u003cli\u003eGround Lift: Switchable\u003c\/li\u003e\n\u003cli\u003eInput Attenuation: Switchable (0dB, -20dB, -40dB)\u003c\/li\u003e\n\u003cli\u003eInstrument Input: 50k Ω\u003c\/li\u003e\n\u003cli\u003eParallel Link Jack: 50k Ω\u003c\/li\u003e\n\u003cli\u003eDimensions: 3″ x 5″ x 2″\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886853128235,"sku":"ART-PDB","price":29.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/direct-boxes-pdb-top__51698.1725447684.1280.1280.jpg?v=1775672751"},{"product_id":"art-pdb4","title":"ART PDB4","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PDB4 is a four channel passive direct box that features four quality fully transformer isolated direct boxes in a 1U 19-inch rack mount chassis.\u003c\/p\u003e\n\u003cp\u003eInputs and outputs of each of the four channels are isolated to maximize channel separation. Transformer isolation on each output helps to eliminate system ground loops.\u003c\/p\u003e\n\u003cp\u003eIt is a rock solid, roadworthy interface for connecting outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced audio products. The PDB4 also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour Fully Isolated Channels\u003c\/li\u003e\n\u003cli\u003eSwitchable Input Attenuation\u003cbr\u003e(0dB, -20dB , -40dB)\u003c\/li\u003e\n\u003cli\u003e50k ohm Instrument\/Line Input\u003c\/li\u003e\n\u003cli\u003e50k ohm Parallel Link Jack\u003c\/li\u003e\n\u003cli\u003e600 ohm XLR Output Jack\u003c\/li\u003e\n\u003cli\u003eSwitchable Ground Lift\u003c\/li\u003e\n\u003cli\u003e1U 19-inch Chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 10 Hz – 50 kHz +\/- 0.5dB @ +4dBu\u003c\/li\u003e\n\u003cli\u003eInput Connections: ¼-inch TS unbalanced\u003c\/li\u003e\n\u003cli\u003eOutput Connections: XLR male balanced\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 50k Ω\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 600 Ω\u003c\/li\u003e\n\u003cli\u003eGround Lift: Switchable\u003c\/li\u003e\n\u003cli\u003eInput Attenuation: Switchable (0dB, -20dB, -40dB)\u003c\/li\u003e\n\u003cli\u003eChassis Type: All steel black finish\u003c\/li\u003e\n\u003cli\u003ePower Requirements: None Totally Passive\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.75″ x 19″ x 6″ (44.5mm x 483mm x 152mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 6.5 lbs. (2.95 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886853161003,"sku":"ART-PDB4","price":88.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/direct-boxes-pdb4-front__79240.1725447883.1280.1280.jpg?v=1775672751"},{"product_id":"art-precisionphonou","title":"ART PRECISIONPHONOU","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eART is proud to introduce the Precision Phono Preamp for those seeking to connect their turntable to PA or stereo in one quick and easy step. This standalone phono preamp interfaces both types of turntable cartridges Moving Coil (MC) and Moving Magnet (MM) to a wide variety of audio systems.\u003c\/p\u003e\n\u003cp\u003eThe Precision Phono Preamp’s extraordinarily low noise amplifier allows connection to MC cartridges without picking up noise or distortion that transformers can exhibit. The audio is kept pristine with a low-cut filter to remove rumble and low frequency feedback, commonly undesirable for DJ’s and home use.\u003c\/p\u003e\n\u003cp\u003eAnalog inputs on the ART Precision Phono Pre amp are switchable between Moving Magnet and Moving Coil. The unit changes both the gain and the cartridge loading to suit the selected cartridge. The front gain trim control with the signal present\/clip LED allows the user to optimize the output for a wide range of cartridges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConnect any turntable to a wide variety of audio systems. Perfect for DJs and vinyl enthusiasts.\u003c\/li\u003e\n\u003cli\u003eSwitchable low cut rumble filter\u003c\/li\u003e\n\u003cli\u003eVariable preamp gain Signal Present\/Clip Indicator RCA preamp outputs External power supply for lower noise\u003c\/li\u003e\n\u003cli\u003eHigh accuracy\/ low noise phono preamp\u003c\/li\u003e\n\u003cli\u003eMoving Coil\/Moving Magnet switchable input\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886853292075,"sku":"ART-PRECISIONPHONOU","price":70.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/ART-PRECISIONPHONOU-1__23226.1704691678.1280.1280.jpg?v=1775699579"},{"product_id":"art-prosplit","title":"ART PROSPLIT","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ProSplit provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or Front-of-House mixer, with the second isolated output being sent to a monitor or recording mixer. The direct output passes phantom power from the main mixer to the microphone for use with condenser microphones.\u003c\/p\u003e\n\u003cp\u003eThe ProSplit includes a ground-lift switch on the isolated output to reduce noise due to ground loops between connected equipment. For versatility the ProSplit also features an attenuator pad switch on the input that can be used to alternately connect a pre-amplified (line-level) signal to the two microphone-level ProSplit outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 20Hz to 20kHz, ±0.25dB @ -15dBu -3dB@approx.165Hz\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: \u0026lt;0.26% from 20Hz to 20kHz, -15dBu input\u003c\/li\u003e\n\u003cli\u003e\u0026lt;0.1% from 45Hz to 20kHz, -15dBu input\u003c\/li\u003e\n\u003cli\u003e0.002% Typical @ 1kHz, -15dBu input\u003c\/li\u003e\n\u003cli\u003ePhase Shift: \u0026lt;10 degrees @ 20kHz (Ref, 1kHz)\u003c\/li\u003e\n\u003cli\u003eInput Impedance: \u0026gt;1.1k Ω @ 1kHz (Typical driving source impedance is 150 Ω)\u003c\/li\u003e\n\u003cli\u003eOuput Impedance: \u0026lt;255 Ω @ 1kHz (Typical output load impedance is 1k Ω)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: -1.4dBu @ 20Hz\/+3.5dBu\u003c\/li\u003e\n\u003cli\u003eCMRR: \u0026gt;105dB @ 60Hz \/ \u0026gt;80dB @ 3kHz\u003c\/li\u003e\n\u003cli\u003eInsertion Loss: Approximately 2dB @ 1kHz\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level For 1% THD: -1.4dBu @ 20Hz\/+3.5dBu @ 30Hz \/ +9.4dBu @ 50Hz\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.85″ H x 4.6″ W x 3.5″D (47mm x 117mm x 89mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.9 lbs (0.4 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886853423147,"sku":"ART-PROSPLIT","price":52.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/patchbays-prosplit-front__27076.1725521145.1280.1280.jpg?v=1775672753"},{"product_id":"art-rp1","title":"ART RP1","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing the RP-1 Mic Preamp, a single channel preamp to improve the performance of ribbon and dynamic microphones. This preamp brings out all of the nuances of a microphone before running into your recording interface or mixer through long cable runs.\u003c\/p\u003e\n\u003cp\u003eWith the RP1 the user can tailor the loading on the mic through the variable impedance control. The low cut filter allows the removal of wind noise and plosives before adding additional gain. The discrete preamp circuitry inside is designed for low noise and transparent operation. Balanced output drives long cable runs with ease allowing the preamp to be placed as close as possible to the mic before picking up any noise or interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitchable low cut filter 100 Hz low cut filter\u003c\/li\u003e\n\u003cli\u003eVariable impedance control (150 ohms – 10k ohms)\u003c\/li\u003e\n\u003cli\u003eAdds low-noise, clean gain (28dB @ 10k ohms, 20dB @ 600 ohms)\u003c\/li\u003e\n\u003cli\u003eRuns off +48V Phantom power supply\u003c\/li\u003e\n\u003cli\u003eLow THD discrete circuitry (\u0026lt;0.002% @ 1kHz typ.)\u003c\/li\u003e\n\u003cli\u003eBalanced outputs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886853685291,"sku":"ART-RP1","price":47.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/rp-1-side__59595.1725446247.1280.1280.jpg?v=1775672756"},{"product_id":"art-scl2","title":"ART SCL2","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SCL2 is a highly sophisticated and flexible dynamics processor designed for easy operation and great tone. The unit can be adjusted to provide anything from smooth subtle compression to hard limiting. Noise reduction is provided by a fast solid gate or a subtle expander.\u003c\/p\u003e\n\u003cp\u003eThe Attack and Release functions allow the user to set the general operating range and then automatically adapt to the audio being processed. A full auto mode is also available. The  ultra-precise LED meters while two LED meters clearly display the gain reduction for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual Channel or Linked Stereo Operation\u003c\/li\u003e\n\u003cli\u003e1\/4-Inch TRS Side Chain Inserts\u003c\/li\u003e\n\u003cli\u003e1\/4-Inch TRS And XLR Balanced Inputs\u003c\/li\u003e\n\u003cli\u003e1\/4-Inch TRS And XLR Balanced Outputs\u003c\/li\u003e\n\u003cli\u003eStereo Mode Balance Control\u003c\/li\u003e\n\u003cli\u003eLed Gain Reduction Meters\u003c\/li\u003e\n\u003cli\u003eSelectable Auto\/ Manual Attack\/Release\u003c\/li\u003e\n\u003cli\u003eSelectable Hard\/Soft Knee\u003c\/li\u003e\n\u003cli\u003ePrecise Led Level Meters\u003c\/li\u003e\n\u003cli\u003eInternal Power Supply\u003c\/li\u003e\n\u003cli\u003eAll Steel Chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable id=\"ProductSpecs\" border=\"b\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eInput\/Output Connections\u003c\/td\u003e\n\u003ctd\u003e¼-inch TRS balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eSide Chain Connections\u003c\/td\u003e\n\u003ctd\u003e¼-inch TRS (Tip = Send, Ring = Receive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eInput Impedance\u003c\/td\u003e\n\u003ctd\u003e10k Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eOutput Impedance\u003c\/td\u003e\n\u003ctd\u003e200 Ω (bal), 100 Ω (unbal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+20 dBu Balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Output Level\u003c\/td\u003e\n\u003ctd\u003e+20 dBu Balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e10Hz to 40kHz, +\/- .5dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eDynamic Range\u003c\/td\u003e\n\u003ctd\u003e120 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eAttack Time\u003c\/td\u003e\n\u003ctd\u003e.25mSec to 100mSec Adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eRelease Time\u003c\/td\u003e\n\u003ctd\u003e100mSec to 3 Sec Adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eTotal Harmonic Distortion\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.06% (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e120 V 60 Hz\/50H, 10W max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e1.75″ H x 19.0″ W x 6″ D (4.5 x 48 x 15.2 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.2 lbs (1.9 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886853718059,"sku":"ART-SCL2","price":141.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/preamps-processors-scl2-front02__16925.1725446385.1280.1280.jpg?v=1775672756"},{"product_id":"art-solompa","title":"ART SOLOMPA","description":"\u003cp class=\"richp\"\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"richp\"\u003eART ART Single Channel Microphone preamp with Variable input impedance, multivoice tube, flexible mic voicing, flexible tilt EQ-1U, tunable low-cut fliter-1U\u003cbr\u003e\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886853849131,"sku":"ART-SOLOMPA","price":251.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/626343_1__79935.1710239376.1280.1280.jpg?v=1775699579"},{"product_id":"art-solovla","title":"ART SOLOVLA","description":"\u003cp class=\"richp\"\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"richp\"\u003eART ART 2 Channel Vactrol Tube Leveler\/Multivoice Tube, Optop Compressor-1U\u003cbr\u003e\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886853914667,"sku":"ART-SOLOVLA","price":227.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/img_1706895527_Solo-VLA-Front-V2copy__58274__74602.1710241925.1280.1280.jpg?v=1775699580"},{"product_id":"art-splitcompro","title":"ART SPLITCOMPRO","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse the SPLITCom Pro to Split or Combine balanced low impedance microphone signals.\u003c\/p\u003e\n\u003cp\u003eAS A SPLITTER: The SPLITCom Pro provides one direct-coupled output and one isolated output from a single microphone. Applications include sending the direct output to the main or FOH mixer, and the second isolated output to a monitor or recording mixer. The MAIN MIC OUTPUT passes phantom power from the main mixer to the MAIN MIC INPUT for use with condenser microphones. Phantom power is blocked from passing to the ISOLATED MIC OUTPUT.\u003c\/p\u003e\n\u003cp\u003eAS A COMBINER: The SPLITCom Pro provides one output from two microphone inputs. The PHASE switch can be used to invert the relative phase of the ISOLATED MIC INPUT. Applications include dual micing of percussion instruments, choirs, and instrument amplifiers. Phantom power passes through each output to their respective input, (MAIN to MAIN, ISOLATED to ISOLATED), however phantom power is blocked from passing between the MAIN and ISOLATED signal paths. Only the audio passes between the MAIN and ISOLATED signal paths (it is present on all inputs and outputs).\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLow Distortion with Wide Frequency Response\u003c\/li\u003e\n\u003cli\u003eTwo Functions In One Box – Combines and\/or Splits\u003c\/li\u003e\n\u003cli\u003ePhase Invert Switch For Subtractive Combining\u003c\/li\u003e\n\u003cli\u003eGalvanic Isolation To Block Phantom Power Between Channels\u003c\/li\u003e\n\u003cli\u003eGround Lift Switch To Reduce Noise Due To Ground Loops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 20Hz to 150kHz +\/- 0.2 @ 0dBu\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: \u0026lt;0.0007% from 20Hz to 20kHz at 0dBu input\u003c\/li\u003e\n\u003cli\u003eTypical Driving Source Dist.: 150 Ω\u003c\/li\u003e\n\u003cli\u003ePhase Shift: \u0026lt;10 degrees @ 20 to 150kHz (reference 1kHz)\u003c\/li\u003e\n\u003cli\u003eTypical Output Load Impedance: 1k Ω\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.85″ H x 4.6″ W x 3.5″ D (47mm x 117mm x 89mm\u003c\/li\u003e\n\u003cli\u003eWeight: 0.75 lbs (0.32 kg)\u003c\/li\u003e\n\u003cli\u003eNotes: All of the measurements made from the ISOLATED MIC OUTPUT with PHASE switch out (NORM) and a 150 Ω balanced source feeding the MAIN MIC INPUT and a 1k Ω load connected to the ISOLATED MIC OUTPUT to simulate a typical “real world” microphone and mic preamplifier. 0dBu = 0.775VRMS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854012971,"sku":"ART-SPLITCOMPRO","price":32.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/patchbays-splitcompro-front__72106.1725521120.1280.1280.jpg?v=1775672759"},{"product_id":"art-syncgen","title":"ART SYNCGEN","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ART Sync Gen is a simple to use and inexpensive way to improve the performance of your digital recording equipment while eliminating seemingly random pops and clicks that result from synchronization timing errors in recording systems.\u003c\/p\u003e\n\u003cp\u003eA word-clock generator will centralize all of the timing of various pieces of digital equipment, reducing accumulated timing errors between the individual units that make up a digital recording chain. Designed for maximum versatility, the ART SyncGen will provide stable, sample accurate time based reference and can connect to digital audio equipment with either BNC word-clock or coaxial S\/PDIF inputs.\u003c\/p\u003e\n\u003cp\u003eThe ART SyncGen also acts as a system tester by confirming status of BNC word-clock cables and terminations and can verify which pieces of gear are internally terminated. The ART SyncGen will also test proper cable connections to ensure total system accuracy.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStable \u0026amp; Accurate Time-Base Reference\u003c\/li\u003e\n\u003cli\u003e44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz, 176 KHz, 192 KHz Sample Rates\u003c\/li\u003e\n\u003cli\u003eFour High-Current 5 Volt BNC Word-Clock Outputs\u003c\/li\u003e\n\u003cli\u003eTwo “Zero Bit Digital Black” S\/PDIF Outputs On Coaxial RCA Connectors\u003c\/li\u003e\n\u003cli\u003eLED Indicators Monitor Termination And Operating Status of BNC Outputs\u003c\/li\u003e\n\u003cli\u003eLarge, Easy To Read Digital Sample Rate Readout\u003c\/li\u003e\n\u003cli\u003eEasy Sample Rate Selection with Memory Recall After Power Down Cycle\u003c\/li\u003e\n\u003cli\u003eSet Of 75 ohm BNC Terminators And BNC “T” Adaptors Included\u003c\/li\u003e\n\u003cli\u003eEasy To Read User \/ Application Manual Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBNC World-Clock Outputs: \u0026gt; 5 Vpp Into 75 Ω, \u0026lt;5.75 Vpp Unterminated, 40 Ma Rms Maximum Output\u003c\/li\u003e\n\u003cli\u003eS\/Pdif Outputs: \u0026gt; 0.5 Vpp Into 75 Ω, \u0026lt;1 Vpp Unterminated, All Audio Bits Set To Zero “Digital Black”\u003c\/li\u003e\n\u003cli\u003eAvailable Sample Rates: 44.1 Khz, 48 Khz, 88.2 Khz, 96 Khz, 176 Khz, 192 Khz\u003c\/li\u003e\n\u003cli\u003eTimebased Accuracy: ± 10 Ppm @ 0°C To 50°C\u003c\/li\u003e\n\u003cli\u003eJitter: \u0026lt;100 Psec Rms\u003c\/li\u003e\n\u003cli\u003eExternal Power Supply: 8.5 – 14 Vdc Or 7 – 12 Vac @ 500 Ma\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.87″H x 4.61″W x 4.27″D (47.5mm x 117mm x 108mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 1.89lbs (0.86 kg) with power supply and packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854111275,"sku":"ART-SYNCGEN","price":127.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/utilities-syncgen-front__83230.1725521328.1280.1280.jpg?v=1775672760"},{"product_id":"art-tpsii","title":"ART TPSII","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned as the ideal preamp for any application, the tube driven TPS II and DPS II add warmth and texture to any audio source. These two-channel high performance preamps use a hand selected 12AX7A tube in the low noise input circuitry. This, coupled with ART’s proprietary V3™ (Variable Valve Voicing) and variable input impedance allow the TPS II and DPS II to deliver incredible performance from cost effective single space rackmount solutions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV3™ Technology\u003c\/strong\u003e\u003cbr\u003eV3™ provides optimized reference points to begin the recording process. The V3™ presets were created and fine-tuned by some of the industry’s top studio and live-sound engineers. V3™ technology allows you to select between a multitude of presets designed for guitars (electric and acoustic), keyboards, bass guitars, drums, vocals and more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariable Input Impedance\u003c\/strong\u003e\u003cbr\u003eVariable input impedance increases the sonic potential of the TPS II \u0026amp; DPS II even further. It delivers entirely new sonic textures and tone by varying the input impedance of the preamp, which in turn varies the way the microphone reacts to the load of the preamp. This creates a wide range of new sonic possibilities with any modern or vintage condenser, ribbon or dynamic microphone.\u003cbr\u003eThe variable impedance control is infinitely variable allowing much finer control and the ability to tune the preamp to the microphone’s ideal sweet spot. A feature usually only available on far more expensive and exclusive microphone preamps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExtremely Wide Dynamic Range\u003c\/strong\u003e\u003cbr\u003eThe DPS II and TPS II can accept up to +20dB peaks while maintaining over 120dB dynamic range with incredibly low distortion. Input LED metering monitors the signal level of the input amplifier so maximum gain can be achieved without clipping the preamp at the input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOPL™ (Output Protection Limiter)\u003c\/strong\u003e\u003cbr\u003eART’s OPL™ (Output Protection Limiter), which precisely and accurately controls and maintains the output peak signal. The OPL™ circuitry is crucial in protecting the next link in a signal chain – such as a hard-disk recording system or a sound card – because unlike analog clipping that sounds musical and sometimes pleasing, digital clipping is nasty and often fatal for your monitors’ tweeters. A versatile insert loop on each channel provides access for additional signal processing or direct access to our high quality A\/D converter. Separate gain controls on analog and digital outputs allow you to optimize the unit for simultaneous applications.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVariable Input Impedance\u003c\/li\u003e\n\u003cli\u003eImproved V3™ Variable Valve Voicing Presets\u003c\/li\u003e\n\u003cli\u003eLED Input Meter with Analog Output Meter\u003c\/li\u003e\n\u003cli\u003eEnhanced ART Tube Technology Adds Warmth\u003c\/li\u003e\n\u003cli\u003eAutomatically switches between instrument and microphone preamp\u003c\/li\u003e\n\u003cli\u003eWide Frequency Response (5hz\/50kHz)\u003c\/li\u003e\n\u003cli\u003eEnhanced OPL™ Output Protection Limiter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854176811,"sku":"ART-TPSII","price":222.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/preamps-processors-tpsII-front__75304.1725521557.1280.1280.jpg?v=1775672761"},{"product_id":"art-tubemp","title":"ART TUBEMP","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tube MP is the world’s most popular external tube microphone preamp. Whether you’re working with a digital, computer or analog recording system, the Tube MP’s TEC award nominated design will allow you to obtain professional recording studio results at a fraction of the cost of comparable equipment. The hybrid design of the Tube MP allows it to add warmth and fatness to a signal while maintaining exceptionally low-noise and high quality. While its primary application is to be used with a microphone, the Tube MP is an exceptional direct box – impedance matching, amplifying and improving the sound of any instrument plugged into it.\u003c\/p\u003e\n\u003cp\u003eThe usage of external mic\/line preamps has become increasingly popular over the past several years. The Tube MP offers superior performance and sound quality to the “on-board” preamps found in today’s low-cost mixers and multi-trackers. It’s sound has been consistently favored over other products costing upwards to ten-times its price. Professional quality sound combined with professional features like: a hand-selected 12AX7a tube, phantom power and phase reverse are what have made the Tube MP a staple in thousands of studios worldwide. For a minimal investment, a Tube MP can provide the single largest improvement to the sound of your studio.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProvides Superior Preamplification for: Microphones, Instruments and Line Level Sources\u003c\/li\u003e\n\u003cli\u003eHand Selected 12AX7a Provides 70dB of Gain Smooth, Warm and Fat Sound Quality\u003c\/li\u003e\n\u003cli\u003eVariable Input and Output Gain Controls\u003c\/li\u003e\n\u003cli\u003eExcellent as a Tube DI\u003c\/li\u003e\n\u003cli\u003eXLR and 1\/4″ Inputs and Outputs +48 volts\u003c\/li\u003e\n\u003cli\u003ePhantom Power\u003c\/li\u003e\n\u003cli\u003ePhase Reversal Switch\u003c\/li\u003e\n\u003cli\u003eSuperior Sonic Performance to On-Board Preamps\u003c\/li\u003e\n\u003cli\u003eTEC-Award Nominated Design\u003c\/li\u003e\n\u003cli\u003ePortable, All Steel Construction\u003c\/li\u003e\n\u003cli\u003e1 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 10Hz to 20kHz (+0,-1dB)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: \u0026lt;0.1% (typical)\u003c\/li\u003e\n\u003cli\u003eCMMR: \u0026gt; 75dB (typ @1kHz)\u003c\/li\u003e\n\u003cli\u003eDynamic Range: \u0026gt; 100dB (20Hz to 20kHz)\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: -129dBu (‘A’ weighted XLR to XLR)\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 2k Ω (XLR), 840K Ω (1\/4″)\u003c\/li\u003e\n\u003cli\u003eMaximum Gain: 70dB (XLR to XLR typical)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: +14dBu (XLR), +22dBu (1\/4″)\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level: +28dBu (XLR), +22dBu (1\/4″)\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 600 Ω (XLR), 300 Ω (1\/4″)\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 9 VAC @ 700ma (typ)\u003c\/li\u003e\n\u003cli\u003eDimensions: 5.0″D x 5.5″W x 2.0″H\u003c\/li\u003e\n\u003cli\u003eWeight: 1.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854242347,"sku":"ART-TUBEMP","price":81.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/preamps-processors-tubemp-front__72013.1725521749.1280.1280.jpg?v=1775672761"},{"product_id":"art-tubemp-cu","title":"ART TUBEMP\/CU","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Tube MP\/C (PreAmplifier\/Compressor) is a multi-purpose tool for \naudio engineering and recording. Two independent circuits featuring a \ntube-based analog preamplifier and a VCA-less compressor with optical \ngain reduction control are housed in one, convenient desk-top chassis.\u003c\/p\u003e\n\u003cp\u003eUsed as a mic\/line preamp or as a DI (direct) box, the Tube MP\/C is \ndesigned to work seamlessly with any recording, sound-reinforcement, or \nelectronic instrument setup. A R T’s Tube MP\/C circuitry is a hybrid \ndesign utilizing the latest, most advanced, solid-state and tube \ntechnology.\u003c\/p\u003e\n\u003cp\u003eThe preamplifier’s active balanced solid-state input provides \nextremely low noise and excellent common mode rejection. The ¼-inch high\n impedance input prevents loading of any connected device making the \nTube MP\/C perfect for DI or line level applications. The preamplifier’s \nsecond stage 12AX7a tube runs on a regulated DC voltage providing an \nadditional 20dB of gain.\u003c\/p\u003e\n\u003cp\u003eThe compression circuit features a VCA-less design and utilizes \noptical electronics (Vactrol) coupled with a 12AX7a vacuum tube gain \nstage for superior musical performance.\u003c\/p\u003e\n\u003cp\u003eOptional ART SM1 stand mount securely attaches the Tube MP\/C to any \nmicrophone stand for live stage or studio applications is available.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cdiv id=\"key-features\" class=\"container spacer\"\u003e\n\t\u003ch2\u003eKey Features\u003c\/h2\u003e\n\t\u003cul\u003e\n\u003cli\u003eTube-based mic\/line preamplifier with up to 80 dB of gain\u003c\/li\u003e\n\u003cli\u003eHand-selected 12AX7a tube\u003c\/li\u003e\n\u003cli\u003eOptical (VCA-less) compressor circuitry = transparent dynamics control\u003c\/li\u003e\n\u003cli\u003e1\/4-inch unbalanced inputs and outputs\u003c\/li\u003e\n\u003cli\u003eXLR balanced inputs and outputs\u003c\/li\u003e\n\u003cli\u003eTransformer isolated XLR output\u003c\/li\u003e\n\u003cli\u003eSelectable output range for Line\/Instrument interface levels\u003c\/li\u003e\n\u003cli\u003eLED meters for Tube Warmth, Gain Reduction and Output level\u003c\/li\u003e\n\u003cli\u003e+48V phantom power\u003c\/li\u003e\n\u003cli\u003ePhase reversal switch\u003c\/li\u003e\n\u003cli\u003eSelectable release time settings\u003c\/li\u003e\n\u003cli\u003e\u0026gt; 90dB dynamic range\u003c\/li\u003e\n\u003cli\u003eCustom extruded aluminum chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable id=\"ProductSpecs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e30 Hz – 60 kHz +\/- 1 dB balanced output, 20 Hz – 60 kHz +\/- 1dB 1\/4″ output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eTotal Harmonic Distortion\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.1% @ max gain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eCMMR\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 60 dB @ max gain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eEquivalent Input Noise\u003c\/td\u003e\n\u003ctd\u003e-128dBu typical (“A” wtd., Shorted XLR balanced input, gain @ max)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eInput Impedance\u003c\/td\u003e\n\u003ctd\u003e1M Ω 1\/4″ input, 5K Ω XLR input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eInput\/Output Connections\u003c\/td\u003e\n\u003ctd\u003eInput: XLR balanced or 1\/4″ balanced. Output: 1\/4″ unbalanced XLR balanced, transformer isolated.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Gain\u003c\/td\u003e\n\u003ctd\u003e+80 dB (balanced in-out, +64dB (unbalanced input, balanced output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003eunbalanced (Inst): +15 dBu, balancd (mic): +10 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Output Level\u003c\/td\u003e\n\u003ctd\u003e+19 dBu (Line mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eOutput Impedance\u003c\/td\u003e\n\u003ctd\u003eXLR: \u0026lt;600 Ω, 1\/4″: \u0026lt;300 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eLow Cut Filter\u003c\/td\u003e\n\u003ctd\u003e-3 dB @ 70 Hz, 6dB\/Octave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003ePhantom Power\u003c\/td\u003e\n\u003ctd\u003eSwitch selectable, +48Volts DC, filtered, current limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eChassis Type\u003c\/td\u003e\n\u003ctd\u003eAll aluminum black anodized with integral rubber sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e9VAC @ 1000mA (external)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eAttack Time\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;1 ms (limit), 20 ms (comp.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eRelease Time\u003c\/td\u003e\n\u003ctd\u003e150ms (fast), 20ms – 3s Program dependant (Auto)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eTube Type\u003c\/td\u003e\n\u003ctd\u003eHand selected 12AX7a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eCompressor Slope\u003c\/td\u003e\n\u003ctd\u003e2:1 (Comp.) \/ 11:1 (Limit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e1.75″H x 5.9″ W x 6.5″ D (44.5mm x 150mm x 165mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.9 lbs (1.32 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eNotes\u003c\/td\u003e\n\u003ctd\u003e0dBu = 0.775V rms\u003cbr\u003e\nWeight includes power supply and packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854275115,"sku":"ART-TUBEMP\/CU","price":141.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/preamps-processors-tubempc-front__07228.1725618660.1280.1280.jpg?v=1775699580"},{"product_id":"art-tubemppsu","title":"ART TUBEMPPSU","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Tube MP Project Series is a professional quality audio interface that lets you connect microphone, instrument, and line level signals to\na mixer or other audio input. This hybrid design is the latest in a long line of ART tube preamps. We took our legendary Tube MP series and \nupdated every aspect of the design, inside and out, while still maintaining a compact, reliable, and cost effective product. From the \nnew all-aluminum stackable chassis to the precision LED level metering circuitry, we have improved virtually every aspect of our already \nsuccessful Tube MP series. With up to 70dB of clean musical gain and high output signal drive capability the cold digital world will melt \nwith your mixes! Charge up your creativity with the Tube MP Project Series!\u003c\/p\u003e\n\u003cp\u003eOptional ART SM1 stand mount securely attaches the Tube MP Project \nSeries to any microphone stand for live stage or studio applications is \navailable.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExtremely Low Noise Discrete Front End\u003c\/li\u003e\n\u003cli\u003eUp to 70dB of Clean, “Musical” Gain\u003c\/li\u003e\n\u003cli\u003eHigh Output Signal Drive Capability\u003c\/li\u003e\n\u003cli\u003eFast FET Limiter to Prevent Overload\u003c\/li\u003e\n\u003cli\u003eSwitch Selectable Input Impedance\u003c\/li\u003e\n\u003cli\u003ePrecision LED Metering\u003c\/li\u003e\n\u003cli\u003eBuilt-in Low Noise Phantom Power Supply\u003c\/li\u003e\n\u003cli\u003eCompact, Stackable all Aluminum Chassis\u003c\/li\u003e\n\u003cli\u003eXLR and 1\/4″ Inputs and Outputs\u003c\/li\u003e\n\u003cli\u003ePhase Invert Switch\u003c\/li\u003e\n\u003cli\u003eHigh Cut Filter Switch\u003c\/li\u003e\n\u003cli\u003eVariable Input and Output Controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable id=\"ProductSpecs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e10Hz to 40kHz, +\/-1 dB (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eTotal Harmonic Distortion\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.05% (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eCMRR\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 60dB (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eDynamic Range\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 100dB (20Hz to 20kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eEquivalent Input Noise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;-130dB (XLR to XLR A-weighted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eInput Impedance\u003c\/td\u003e\n\u003ctd\u003eSwitchable, 4.7k Ω \/ 600 Ω (XLR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eInput\/Output Connections\u003c\/td\u003e\n\u003ctd\u003eInput: 1\/4″ TRS unbalanced (1meg Ω), XLR female balanced. Output: 1\/4″ TRS unbalanced (600 Ω), XLR male balanced (\u0026lt;300 Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Gain\u003c\/td\u003e\n\u003ctd\u003e70dB (XLR – XLR), +50dB (1\/4″ – XLR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eInput Gain Pad\u003c\/td\u003e\n\u003ctd\u003eSwitchable, 20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+17dBu (1\/4″), +16dBu (XLR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Output Level\u003c\/td\u003e\n\u003ctd\u003e+20dBu (1\/4″), +26dBu (XLR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eLow Cut Filter\u003c\/td\u003e\n\u003ctd\u003eSwitchable, -3dB @ 40Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eOutput Phase\u003c\/td\u003e\n\u003ctd\u003eSwitchable, Normal\/Invert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eOutput Limiter Type\u003c\/td\u003e\n\u003ctd\u003eSwitchable, Fast \u0026amp; Musical FET Limiter, \u0026gt; 20dB limit range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003ePhantom Power\u003c\/td\u003e\n\u003ctd\u003eSwitchable, +48V DC, filtered, current limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eSignal Metering\u003c\/td\u003e\n\u003ctd\u003ePrecice LED array with a fast attack and moderate release\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eChassis Type\u003c\/td\u003e\n\u003ctd\u003eAluminum Anodized with integral\/stackable rubber sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e10VAC @ 700mA (typ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eTube Type\u003c\/td\u003e\n\u003ctd\u003e12AX7A hand selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e6.5″D x 5.9″ W x 1.75″ H (165mm x 150mm x 44.5mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.5 lbs (1.14 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854307883,"sku":"ART-TUBEMPPSU","price":107.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/preamps-processors-tubempps-front__90448.1725778596.1280.1280.jpg?v=1775699581"},{"product_id":"art-tubempstv3u","title":"ART TUBEMPSTV3U","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Tube MP Studio V3 delivers warmth and fatness to any audio \nsource while maintaining an exceptionally low-noise signal path. While \nits primary function is as a microphone preamp with +48V phantom power, \nvariable gain and phase reverse switching, the Tube MP is also an \nexceptionally versatile tube driven direct box for any instrument \nsource. The Tube MP Studio V3 uses ART’s proven V3™ (Variable Valve \nVoicing) Technology to instantly contour the tone to any source.\u003c\/p\u003e\n\u003cp\u003eV3™ presets were created and fine-tuned by some of the industry’s top\n studio and live-sound engineers and allow instant access to a multitude\n of preamp settings designed for guitars (electric and acoustic), \nkeyboards, bass guitars, drums, vocals and more. Additionally, the Tube \nMP Studio V3 employs OPL™ (Output Protection Limiting) technology to \nprotect the next component in your signal path from clipping and \noverloads.\u003c\/p\u003e\n\u003cp\u003eThe Tube MP Studio V3 offers exceptional sound quality and superior \nperformance to that typically found in “on-board” preamps found in \ntoday’s low-cost mixers, multi-track recorders and audio cards making it\n an ideal tone-shaping tool for any application.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProvides Superior Preamplification for: Microphones, Instruments and Line Level Sources\u003c\/li\u003e\n\u003cli\u003eV3™ – Variable Valve Voicing\u003c\/li\u003e\n\u003cli\u003eOPL™ – Output Protection Limiting\u003c\/li\u003e\n\u003cli\u003eHand Selected 12AX7A Provides 70dB of Gain Smooth, Warm and Fat Sound Quality\u003c\/li\u003e\n\u003cli\u003eVariable Input and Output Gain Controls\u003c\/li\u003e\n\u003cli\u003eExcellent as a Tube DI\u003c\/li\u003e\n\u003cli\u003eXLR and 1\/4″ Inputs and Outputs\u003c\/li\u003e\n\u003cli\u003e+48 Volts of Phantom Power\u003c\/li\u003e\n\u003cli\u003ePhase Reversal Switch\u003c\/li\u003e\n\u003cli\u003ePortable, All Steel Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable id=\"ProductSpecs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e5Hz to 50kHz (+0 to -1dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eTotal Harmonic Distortion\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;.01% (clean); 0.1% (warm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eCMMR\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 75dB (typ. @ 1kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eDynamic Range\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;100dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eEquivalent Input Noise\u003c\/td\u003e\n\u003ctd\u003e-129dBu (A weighted, xlr to xlr)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Gain\u003c\/td\u003e\n\u003ctd\u003e80dB (xlr to xlr); 74dB (1\/4″ to xlr)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+19dBu (xlr); +22dBu (1\/4″)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Output Level\u003c\/td\u003e\n\u003ctd\u003e+28dBu (xlr); +22dBu (1\/4″)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003ePhantom Power\u003c\/td\u003e\n\u003ctd\u003e+48 volts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e110-125 VAC, 16W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eTube Type\u003c\/td\u003e\n\u003ctd\u003e12AX7A – Dual Triode (Hand Selected)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e5.0″D x 5.5″W x 2.0″ H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.5 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854340651,"sku":"ART-TUBEMPSTV3U","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/TUBEMPSTV3__57600.1725778221.1280.1280.jpg?v=1775699581"},{"product_id":"art-tubempu","title":"ART TUBEMPU","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Tube MP is the world’s most popular external tube microphone \npreamp. Whether you’re working with a digital, computer or analog \nrecording system, the Tube MP’s TEC award nominated design will allow \nyou to obtain professional recording studio results at a fraction of the\n cost of comparable equipment. The hybrid design of the Tube MP allows \nit to add warmth and fatness to a signal while maintaining exceptionally\n low-noise and high quality. While its primary application is to be used\n with a microphone, the Tube MP is an exceptional direct box – impedance\n matching, amplifying and improving the sound of any instrument plugged \ninto it.\u003c\/p\u003e\n\u003cp\u003eThe usage of external mic\/line preamps has become increasingly \npopular over the past several years. The Tube MP offers superior \nperformance and sound quality to the “on-board” preamps found in today’s\n low-cost mixers and multi-trackers. It’s sound has been consistently \nfavored over other products costing upwards to ten-times its price. \nProfessional quality sound combined with professional features like: a \nhand-selected 12AX7a tube, phantom power and phase reverse are what have\n made the Tube MP a staple in thousands of studios worldwide. For a \nminimal investment, a Tube MP can provide the single largest improvement\n to the sound of your studio.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProvides Superior Preamplification for: Microphones, Instruments and Line Level Sources\u003c\/li\u003e\n\u003cli\u003eHand Selected 12AX7a Provides 70dB of Gain Smooth, Warm and Fat Sound Quality\u003c\/li\u003e\n\u003cli\u003eVariable Input and Output Gain Controls\u003c\/li\u003e\n\u003cli\u003eExcellent as a Tube DI\u003c\/li\u003e\n\u003cli\u003eXLR and 1\/4″ Inputs and Outputs +48 volts\u003c\/li\u003e\n\u003cli\u003ePhantom Power\u003c\/li\u003e\n\u003cli\u003ePhase Reversal Switch\u003c\/li\u003e\n\u003cli\u003eSuperior Sonic Performance to On-Board Preamps\u003c\/li\u003e\n\u003cli\u003eTEC-Award Nominated Design\u003c\/li\u003e\n\u003cli\u003ePortable, All Steel Construction\u003c\/li\u003e\n\u003cli\u003e1 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable id=\"ProductSpecs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e10Hz to 20kHz (+0,-1dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eTotal Harmonic Distortion\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.1% (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eCMMR\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 75dB (typ @1kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eDynamic Range\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 100dB (20Hz to 20kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eEquivalent Input Noise\u003c\/td\u003e\n\u003ctd\u003e-129dBu (‘A’ weighted XLR to XLR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eInput Impedance\u003c\/td\u003e\n\u003ctd\u003e2k Ω (XLR), 840K Ω (1\/4″)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Gain\u003c\/td\u003e\n\u003ctd\u003e70dB (XLR to XLR typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+14dBu (XLR), +22dBu (1\/4″)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Output Level\u003c\/td\u003e\n\u003ctd\u003e+28dBu (XLR), +22dBu (1\/4″)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eOutput Impedance\u003c\/td\u003e\n\u003ctd\u003e600 Ω (XLR), 300 Ω (1\/4″)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e9 VAC @ 700ma (typ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e5.0″D x 5.5″W x 2.0″H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.5 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854373419,"sku":"ART-TUBEMPU","price":102.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/preamps-processors-tubemp-front-1140x641__40677.1725778805.1280.1280.jpg?v=1775699582"},{"product_id":"art-tubempusbu","title":"ART TUBEMPUSBU","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Tube MP Project Series is a professional quality audio interface\n that lets you connect microphone, instrument, and line level signals to\n a mixer or other audio input. This hybrid design is the latest in a \nlong line of ART tube preamps. We took our legendary Tube MP series and \nupdated every aspect of the design, inside and out, while still \nmaintaining a compact, reliable, and cost effective product. From the \nnew all-aluminum stackable chassis to the precision LED level metering \ncircuitry, we have improved virtually every aspect of our already \nsuccessful Tube MP series. With up to 70dB of clean musical gain and \nhigh output signal drive capability the cold digital world will melt \nwith your mixes! Charge up your creativity with the Tube MP Project \nSeries!\u003c\/p\u003e\n\u003cp\u003eOptional ART SM1 stand mount securely attaches the Tube MP Project \nSeries to any microphone stand for live stage or studio applications is \navailable.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExtremely Low Noise Discrete Front End\u003c\/li\u003e\n\u003cli\u003eUp to 70dB of Clean, “Musical” Gain\u003c\/li\u003e\n\u003cli\u003eHigh Output Signal Drive Capability\u003c\/li\u003e\n\u003cli\u003eFast FET Limiter to Prevent Overload\u003c\/li\u003e\n\u003cli\u003eSwitch Selectable Input Impedance\u003c\/li\u003e\n\u003cli\u003ePrecision LED Metering\u003c\/li\u003e\n\u003cli\u003eBuilt-in Low Noise Phantom Power Supply\u003c\/li\u003e\n\u003cli\u003eCompact, Stackable all Aluminum Chassis\u003c\/li\u003e\n\u003cli\u003eXLR and 1\/4″ Inputs and Outputs\u003c\/li\u003e\n\u003cli\u003ePhase Invert Switch\u003c\/li\u003e\n\u003cli\u003eHigh Cut Filter Switch\u003c\/li\u003e\n\u003cli\u003eVariable Input and Output Controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable id=\"ProductSpecs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e10Hz to 40kHz, +\/-1 dB (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eTotal Harmonic Distortion\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.05% (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eCMRR\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 60dB (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eDynamic Range\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 100dB (20Hz to 20kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eEquivalent Input Noise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;-130dB (XLR to XLR A-weighted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eInput Impedance\u003c\/td\u003e\n\u003ctd\u003eSwitchable, 4.7k Ω \/ 600 Ω (XLR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eInput\/Output Connections\u003c\/td\u003e\n\u003ctd\u003eInput: 1\/4″ TRS unbalanced (1meg Ω), XLR female balanced. Output: 1\/4″ TRS unbalanced (600 Ω), XLR male balanced (\u0026lt;300 Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Gain\u003c\/td\u003e\n\u003ctd\u003e70dB (XLR – XLR), +50dB (1\/4″ – XLR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eInput Gain Pad\u003c\/td\u003e\n\u003ctd\u003eSwitchable, 20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Input Level\u003c\/td\u003e\n\u003ctd\u003e+17dBu (1\/4″), +16dBu (XLR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eMaximum Output Level\u003c\/td\u003e\n\u003ctd\u003e+20dBu (1\/4″), +26dBu (XLR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eLow Cut Filter\u003c\/td\u003e\n\u003ctd\u003eSwitchable, -3dB @ 40Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eOutput Phase\u003c\/td\u003e\n\u003ctd\u003eSwitchable, Normal\/Invert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eOutput Limiter Type\u003c\/td\u003e\n\u003ctd\u003eSwitchable, Fast \u0026amp; Musical FET Limiter, \u0026gt; 20dB limit range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003ePhantom Power\u003c\/td\u003e\n\u003ctd\u003eSwitchable, +48V DC, filtered, current limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eSignal Metering\u003c\/td\u003e\n\u003ctd\u003ePrecice LED array with a fast attack and moderate release\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eChassis Type\u003c\/td\u003e\n\u003ctd\u003eAluminum Anodized with integral\/stackable rubber sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e10VAC @ 700mA (typ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eTube Type\u003c\/td\u003e\n\u003ctd\u003e12AX7A hand selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e6.5″D x 5.9″ W x 1.75″ H (165mm x 150mm x 44.5mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"header\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.5 lbs (1.14 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854471723,"sku":"ART-TUBEMPUSBU","price":127.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/preamps-processors-tubempps-front__86511.1725779068.1280.1280.jpg?v=1775699582"},{"product_id":"art-usbdi","title":"ART USBDI","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USBDI takes in USB audio, converts it to analog audio and then isolates the output using custom transformers. The output isolation is key to removing ground loops and other system noise between the digital and analog audio systems.\u003c\/p\u003e\n\u003cp\u003eA large knob on the USBDI front panel allows quick, precise control over the output level, while a separate headphone output allows the user to monitor the system. The front panel Main Outputs switch allows the user to keep the isolated outputs at a fixed level while controlling level of the Headphones output.\u003c\/p\u003e\n\u003cp\u003eThe line level XLR outputs are available for connecting to all sorts of systems. The Main outputs are always isolated but allow the user to control the ground reference to reduce noise.\u003c\/p\u003e\n\u003cp\u003eThe USBDI is powered by USB, drawing less than 200mA and eliminating the need for an external power Source\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality D to A Convertor\u003c\/li\u003e\n\u003cli\u003eSample rates from 32kHz to 48kHz\u003c\/li\u003e\n\u003cli\u003eSwitchable Transformer isolated outputs\u003c\/li\u003e\n\u003cli\u003eFront panel volume control\u003c\/li\u003e\n\u003cli\u003eFront panel headphone output\u003c\/li\u003e\n\u003cli\u003eRuns off USB power\u003c\/li\u003e\n\u003cli\u003eCompact rugged package designed for years of use\u003c\/li\u003e\n\u003cli\u003ePerfect for connecting computers to any audio system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Connections USB 2.0\u003c\/li\u003e\n\u003cli\u003eOutput Connections Balanced XLR and 1\/8” Headphone output\u003c\/li\u003e\n\u003cli\u003eMax output level +7.5dBu. Balanced line.\u003c\/li\u003e\n\u003cli\u003eHeadphone output 150mW\/ channel max.\u003c\/li\u003e\n\u003cli\u003eFrequency Response 20Hz to 20KHz +\/- 1dB\u003c\/li\u003e\n\u003cli\u003eTHD \u0026lt;0.020% (typical)\u003c\/li\u003e\n\u003cli\u003eDynamic Range 96 dB typ. “A” wtd.\u003c\/li\u003e\n\u003cli\u003eSupported Sample rates 32kHz, 44.1kHz, 48kHz\u003c\/li\u003e\n\u003cli\u003eDimensions 1.87”H x 4.61”W x 4.27”D (47.5mm x 117mm x 108mm)\u003c\/li\u003e\n\u003cli\u003eWeight 1.89 lbs. (.86kg) with packaging\u003c\/li\u003e\n\u003cli\u003ePower Requirements USB, 500mA Max.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854504491,"sku":"ART-USBDI","price":63.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/direct-boxes-usb-di-angle01__69900.1725522524.1280.1280.jpg?v=1775672762"},{"product_id":"art-usbdualpreps","title":"ART USBDUALPREPS","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB Dual Pre is a full-featured high quality dual portable preamplifier and computer interface packed into a compact rugged case.\u003c\/p\u003e\n\u003cp\u003eIt is designed to work over a wide variety of applications from remote field recording to desktop\/studio tracking. Each of the two low noise input channels has up to 48 dB of clean gain with signal present and clip LED indicators. Inputs can be either XLR balanced or 1\/4-inch TRS. Each of the 1\/4-inch TRS outputs is buffered low impedance balanced.\u003c\/p\u003e\n\u003cp\u003eThe USB Dual Pre is powered via the USB bus. An internal 9 Volt battery, or optional external 12V power supply (or any combination of USB, battery \u0026amp; power supply) can be used depending on application. When running powered by battery alone, you should expect in excess of 50 hours of operation with phantom power off. Battery life will drop to approximately 20 hours (depending on microphone) when phantom powering is engaged (still enough time to get through an average session).\u003c\/p\u003e\n\u003cp\u003eThe built-in low noise +48 Volt phantom power supply allows you to power up to 2 microphones as well as the preamplifier when running from any power sources including the USB bus.\u003c\/p\u003e\n\u003cp\u003eFor monitoring, an 1\/8-inch TRS mini headphone jack with level and monitor mix controls on the rear allow for latency free local monitoring of the inputs while recording as well as playback monitoring of the USB bus. The monitor mix is also routed to the 1\/4-inch TRS balanced outputs. This lets you use the 1\/4-inch outputs as either preamplifier outputs or as the monitor feed to your powered monitors.\u003c\/p\u003e\n\u003cp\u003eThe USB interface is fully compliant with the USB 1.1 specification and uses USB adaptive mode for playback and USB asynchronous mode for record. It will work with the USB audio device drivers built into Windows 98SE\/ME\/2000\/XP\/Vista and Apple OS9.1\/OSX computers with native USB support. No special drivers are needed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Connectivity to Desktop and Laptop Computers\u003c\/li\u003e\n\u003cli\u003eLow Noise Fully Balanced XLR and 1\/4-inch TRS Combi Inputs\u003c\/li\u003e\n\u003cli\u003eUp to 48 dB of Clean Gain n Built-in Low Noise Phantom Power Supply\u003c\/li\u003e\n\u003cli\u003eLatency Free Monitoring Mix and Level Controls\u003c\/li\u003e\n\u003cli\u003eIndependent Channel Gain Controls\u003c\/li\u003e\n\u003cli\u003e1\/4-inch TRS Balanced Monitor and 1\/8-inch Headphone Monitor Outputs\u003c\/li\u003e\n\u003cli\u003eIncludes Audacity Recording \u0026amp; Production Software\u003c\/li\u003e\n\u003cli\u003eFlexible 3-way Power from USB, External Supply, or 9 Volt Battery\u003c\/li\u003e\n\u003cli\u003eIncludes USB Cable – Everything Needed To Start Recording Today!\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854537259,"sku":"ART-USBDUALPREPS","price":74.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/interfaces-usbdualpreps-front-1__11748.1725522645.1280.1280.jpg?v=1775672763"},{"product_id":"art-voicechannel","title":"ART VOICECHANNEL","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ART VoiceChannel is the perfect complete channel input strip for recording, broadcast or high profile live applications where maximum performance and detail is required. Designed to deliver in critical applications where full control of the audio source is required, the VoiceChannel combines a single Class-A tube mic preamp, full-featured dynamics control, De-esser, expander and semi-parametric EQ into one unit with analog and digital output as well as the ability to direct connect to any computer or laptop via integrated USB port.\u003c\/p\u003e\n\u003cp\u003eDesigned to be a powerful channel strip and the ideal all in one input solution for analog or digital recording, each stage of the VoiceChannel’s signal path provides full control and a full feature set for each component, making it the perfect choice for tracking critical vocals and solo instruments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTube Preamp\u003c\/strong\u003e\u003cbr\u003eThe VoiceChannel’s preamp section uses a Class-A tube design with variable input impedance and selectable tube plate voltage to create the most versatile high performance microphone preamplifiers in their class. Capable of delivering incredible warmth, presence and clarity 12AX7A vacuum tube used in the circuit delivers controlled ‘musical sounding’ overload characteristics for added warmth and presence, while maintaining a wide dynamic range with unsurpassed sonic detail and clarity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariable Input Impedance\u003c\/strong\u003e\u003cbr\u003eVariable input impedance optimizes the input for the widest possible range of microphone sources. The ability to vary the input impedance of a VoiceChannel’s preamp changes the load the microphone ‘sees’ in the system, dramatically altering its performance and character. This creates a wide range of new sonic possibilities with any modern or vintage condenser, ribbon or dynamic microphone.\u003c\/p\u003e\n\u003cp\u003eThe variable impedance control is infinitely variable allowing much finer control and the ability to tune the preamp to the microphone’s ideal sweet spot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelectable Tube Plate Voltage\u003c\/strong\u003e\u003cbr\u003eThe selectable tube voltage function delivers a wide variety of providing the either high plate voltage to the tube, ensuring maximum output with extremely low noise and distortion, or lowering the plate voltage to increase warmth and tube character.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComprehensive Dynamic Control \u0026amp; EQ\u003c\/strong\u003e\u003cbr\u003eThe VoiceChannel delivers full dynamic control from the integrated fully variable Compressor \/ De-Esser \/ Expander section. Unlike most channel strip processors in this class, every function of the VoiceChannel’s dynamics control is easily tunable from the front panel. Complete control of compressor’s threshold, ratio, attack and release as well as de-esser frequency \u0026amp; level and expander \/ gate threshold are fully variable from smooth high quality low noise pots.\u003c\/p\u003e\n\u003cp\u003eThe VoiceChannel’s semi-parametric EQ offers wide tune-ability and tone control, and for added versatility the EQ can be patched before OR after the dynamics processor with a simple on-button touch on the front panel – no re-patching required. Separate insert jacks on the back panel allow you quick quiet in-line connectivity to external signal processing gear immediately after the Mic preamp (before the EQ and dynamics processor) in the signal path. Another insert patch point exists just before the A\/D converters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDigital Connectivity and USB Output\u003c\/strong\u003e\u003cbr\u003eThe ART VoiceChannel can direct connect to virtually any recording platform, analog or digital console making it one of the most versatile input strips in your audio toolkit. Choose between a wide range of outputs including balanced analog out, 44.1 KHz to 192 KHz AES\/EBU, S\/PDIF, or ADAT digital output or if need be, direct connect to any computer or laptop via USB. All analog and digital outputs provide comprehensive metering for a detailed indication of audio levels.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal input solution for any recording application\u003c\/li\u003e\n\u003cli\u003eFully Featured Tube Microphone Preamplifier with Selectable plate Voltage and Variable Input Impedance\u003c\/li\u003e\n\u003cli\u003eExceptional warmth and definition from proven ART Tube Preamp design\u003c\/li\u003e\n\u003cli\u003eSmooth musical sounding dynamics control including Compressor \/ Expander \/ De-Esser \/ Gate\u003c\/li\u003e\n\u003cli\u003ePowerful Parametric EQ selectable Pre or Post Compressor in signal path\u003c\/li\u003e\n\u003cli\u003eFlexible digital connectivity including ADAT Lite-pipe \/ AES\/EBU \/ S\/PDIF \/ TOSLink Digital Output supports 44.1 to 192 KHz Sample Rates\u003c\/li\u003e\n\u003cli\u003eUSB direct-connect to computer or laptop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePreamp\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrophone Gain: 0 dB to +60 dB\u003c\/li\u003e\n\u003cli\u003eInstrument Gain: +3 dB to +40 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoost\/Cut: +12 dB on each band\u003c\/li\u003e\n\u003cli\u003eLow Freq. Tuning: 50\/150 Hz Selectable\u003c\/li\u003e\n\u003cli\u003eMID 1 Freq. Tuning: 100 Hz to 3 KHz continuously variable\u003c\/li\u003e\n\u003cli\u003eMID 2 Freq. Tuning: 500 Hz to 15 KHz continuously variable\u003c\/li\u003e\n\u003cli\u003eHigh Freq. Tuning: 5K\/15 KHz Selectable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompressor\/Limiter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAttack Time: 250 uSec. to 100 mSec.\u003c\/li\u003e\n\u003cli\u003eRelease Time: 100 mSec to 3 Sec.\u003c\/li\u003e\n\u003cli\u003eDe-esser Tuning: .5 KHz to 15 KHz continuously variable\u003c\/li\u003e\n\u003cli\u003eCompression Ratio: 1:1 to 20:1\u003c\/li\u003e\n\u003cli\u003eExpander Slope: 1:1.5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnalog In to Analog Out: 12 Hz to 100 KHz +0, -1 dB\u003c\/li\u003e\n\u003cli\u003eAnalog In to Digital Out: 12 Hz to 20 KHz +0, -1 dB @ 44.1 KHz sample rate\u003cbr\u003e16 Hz to 42 KHz +0, -1 dB @ 96 KHz\u003c\/li\u003e\n\u003cli\u003eTHD: 1 KHz \u0026lt; .015% typical\u003cbr\u003e20 to 20 KHz \u0026lt; .033% typical\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic\/Line: -130 dBu, Input shorted, Max gain, “A” weighted\u003c\/li\u003e\n\u003cli\u003eInstrument: -105 dBu, Input shorted, Max gain, “A” weighted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDigital section\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWordclock Range: 30 KHz to 204 KHz\u003c\/li\u003e\n\u003cli\u003eSample Rates: 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz, 176 KHz, 192 KHz\u003c\/li\u003e\n\u003cli\u003eUSB Minimum System Requirements: USB 1.1 compliant, Windows 98SE or newer, Mac OS 9.1 or newer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAttack Time: 250 uSec. to 100 mSec\u003c\/li\u003e\n\u003cli\u003eBoost and Cut\/Frequency Band: +12 dB on each band\u003c\/li\u003e\n\u003cli\u003eCompression Ratio: 1:1 to 20:1\u003c\/li\u003e\n\u003cli\u003eEQ Frequency Bands: Low Freq. Tuning: 50\/150 Hz Selectable\u003c\/li\u003e\n\u003cli\u003eMid 1 Freq. Tuning: 100 Hz to 3 KHz continuously variable\u003c\/li\u003e\n\u003cli\u003eMid 2 Freq. Tuning: 500 Hz to 15 KHz continuously variable\u003c\/li\u003e\n\u003cli\u003eHigh Freq. Tuning: 5K\/15 KHz Selectable\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: -130 dBu, t shorted, Max gain, A weighted\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 12 Hz to 100 KHz +0, -1 dB\u003c\/li\u003e\n\u003cli\u003eMaximum Gain: 0 dB to +60 dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: \u0026lt;.033% typical\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854832171,"sku":"ART-VOICECHANNEL","price":535.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/interfaces-voicechannel-front02-1140x641__27314.1725530633.1280.1280.jpg?v=1775672766"},{"product_id":"art-xdirect","title":"ART XDIRECT","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1\/4″ and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source. The Xdirect has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Xdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.\u003c\/p\u003e\n\u003cp\u003eThe Input Attenuator switches allow for a wide range of signal levels and the Input Link jack allows for tapping off of your signal chain. The Ground Lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.\u003c\/p\u003e\n\u003cp\u003eWhat further sets the Xdirect apart from other “Active DI” boxes are its extended features and versatility. We have added a switchable low pass Filter that cuts out all very high frequency interference. This Bessel filter on the input is placed out of the audio range and is primarily intended to reduce radio frequency interference before it gets into the main system. The filter is also very effective in reducing any digital computer noise artifacts when using the Xdirect as an interface between a computer based audio workstation and your monitors.\u003c\/p\u003e\n\u003cp\u003eA Phase Invert switch, while not normally included with your run of the mill D.I. box, has been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.\u003c\/p\u003e\n\u003cp\u003eThe Xdirects active circuitry is powered by an internal 9volt battery, when external power is not available. In this mode it draws 3.5 ma which should give you more than 250 hours of operation off of a new battery. If phantom power is available, then the Xdirect will automatically draw its power from the external source.\u003c\/p\u003e\n\u003cp\u003eThe Battery on\/off switch lights dim when the unit is running off of the battery, lights brightly when it is running off of phantom power, and is off when the unit is inactive.\u003c\/p\u003e\n\u003cp\u003eThe compact black anodized all aluminum case and its flexible power design allow the Xdirect to provide years of trouble free service in Live Sound, Permanent\/Fixed Install, D.J., and virtually any PA application. Its full feature set, rugged construction, and high-end specifications make the Xdirect the obvious choice whenever you have to interface high impedance sources with a low noise balanced system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 10Hz -100kHz, +\/-.5dB @ +0dBu\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: \u0026lt;.05% Typical\u003c\/li\u003e\n\u003cli\u003eDynamic Range: \u0026gt;100dB typical\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: 4\/+24\/+44dBu\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level: +6dBu (battery powered), +14dBu (phantom powered)\u003c\/li\u003e\n\u003cli\u003eInput Connections: ¼-inch TRS and XLR female unbalanced, 470k Ω\u003c\/li\u003e\n\u003cli\u003eOutput Connections: XLR male balanced, \u0026lt;600 Ω\u003c\/li\u003e\n\u003cli\u003eOutput Phase: Switchable, Normal\/Invert\u003c\/li\u003e\n\u003cli\u003eGround Lift: Switchable, fully isolates inputs from chassis and output\u003c\/li\u003e\n\u003cli\u003eInput Attenuation: Switchable, (0dB, -20dB, -40dB)\u003c\/li\u003e\n\u003cli\u003eFilter Type \/ Response: Switchable, Low Pass, -3dB @30kHz\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 9volt @3.5ma (internal battery) or 18VDC-48VDC @9.5ma (phantom power)\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.75″H x 4.2″W x 3.5″D (44.5mm x 107mm x 89mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.75 lbs (0.34 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854864939,"sku":"ART-XDIRECT","price":44.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/direct-boxes-xdirect-angle__07090.1725530892.1280.1280.jpg?v=1775672767"},{"product_id":"art-zdirect","title":"ART ZDIRECT","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Zdirect is a high quality totally passive interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru a high performance audio isolation transformer. The high impedance single-ended 1\/4″ input is converted by the transformer into an isolated balanced low impedance signal source. The Zdirects audio transformer has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Zdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.\u003c\/p\u003e\n\u003cp\u003eThe Input Attenuator switches allow for a wide range of signal levels and the Input Thru jack allows for tapping off of your signal chain. The Ground Lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.\u003c\/p\u003e\n\u003cp\u003eWhat further sets the Zdirect apart from other “DI” boxes are its extended features and versatility. We have added a switchable low pass Filter that cuts out all very high frequency interference. This Bessel filter on the output is placed out of the audio range and is primarily intended to reduce radio frequency interference before it gets into the main system. The filter is also very effective in reducing any digital computer noise artifacts when using the Zdirect as an interface between a computer based audio workstation and your monitors. The Phase Invert switch, while not normally included with your run of the mill D.I. box, has been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.\u003c\/p\u003e\n\u003cp\u003eThe compact black anodized all aluminum case and it’s passive design allow the Zdirect to provide years of trouble free service in Live Sound, Permanent\/Fixed Install, D.J., and virtually any PA application. It’s full feature set, rugged construction, and high-end specifications make the Zdirect the obvious choice.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully passive, high performance transformer design. No battery required.\u003c\/li\u003e\n\u003cli\u003eConverts 50k ohm inputs into 600 ohm balanced outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable input attenuation (0, -20, -40 dB) Switchable low pass filter\u003c\/li\u003e\n\u003cli\u003eSwitchable phase invert\u003c\/li\u003e\n\u003cli\u003eSwitchable ground lift (fully isolates inputs from chassis and outputs)\u003c\/li\u003e\n\u003cli\u003eXLR connectors for balanced outputs\u003c\/li\u003e\n\u003cli\u003eRugged extruded aluminum case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 10Hz -50kHz, +\/-.5dB @ +4dBu\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: .01% Typical @ 1kHz, +18dBu, \u0026lt;.05% @ 100Hz, +18dBu\u003c\/li\u003e\n\u003cli\u003eInput Connections: ¼ – inch TRS unbalanced, 50k Ω\u003c\/li\u003e\n\u003cli\u003eOutput Connections: XLR male balanced, 600 Ω\u003c\/li\u003e\n\u003cli\u003eOutput Phase: Switchable, Normal\/Invert\u003c\/li\u003e\n\u003cli\u003eGround Lift: Switchable, fully isolates inputs from chassis and output\u003c\/li\u003e\n\u003cli\u003eInput Attenuation: Switchable, (0dB, -20dB, -40dB)\u003c\/li\u003e\n\u003cli\u003eFilter Type \/ Response: Switchable, Low Pass, -3dB @30kHz\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.75″H x 4.2″D x 3.5″W (44.5mm x 107mm x 89mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.75 lbs (0.35 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886854897707,"sku":"ART-ZDIRECT","price":29.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/direct-boxes-zdirect-angle__51574.1725531013.1280.1280.jpg?v=1775672767"},{"product_id":"atlas-sound-bb-1616","title":"Atlas Sound BB-1616","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAtlasIED BlueBridge\u003csup\u003e®\u003c\/sup\u003e networkable DSP devices are powerful and flexible tools offering mission critical solutions to satisfy the exact needs of any installation. Engineered to strict standards with the highest quality internal components, BlueBridge\u003csup\u003e®\u003c\/sup\u003e devices provide pure clean audio, Ethernet connectivity for cost effective TCP\/IP control and easy programmability. Intended for a variety of audio applications, BlueBridge\u003csup\u003e®\u003c\/sup\u003e DSP platforms are cost effective solutions for the most demanding applications including video conferencing, house of worship, presentation rooms, conference rooms, courtrooms, room combining, restaurants, multi-zone paging, background music, and many other sound reinforcement and AV applications.\u003c\/p\u003e\u003cp\u003eThe BlueBridge\u003csup\u003e®\u003c\/sup\u003e family of products feature open architecture, drag and drop software that makes them incredibly easy to use. Each model utilizes high quality THAT\u003csup\u003e®\u003c\/sup\u003e microphone preamps and 24 Bit converters to obtain an ultra-low noise floor while still maintaining a smooth sound that satisfies the needs of demanding clients, with the flexibility and control a system designer requires. BlueBridge\u003csup\u003e®\u003c\/sup\u003e models use a 40 Bit Floating Point DSP engine to prevent digital clipping that commonly occurs in other DSP products and to obtain maximum speed and power to process advanced algorithms in complex system designs. BlueBridge\u003csup\u003e®\u003c\/sup\u003e DSP units can operate on any network while the optional control accessories require a PoE switch. BlueBridge\u003csup\u003e®\u003c\/sup\u003e devices need to be connected to the network during set-up and if control is required but can be applied in many instances where network control is unnecessary or unavailable like live speech applications. When connected to a network, each BlueBridge\u003csup\u003e®\u003c\/sup\u003e processor on the network will be auto recognized and controllable. BlueBridge\u003csup\u003e®\u003c\/sup\u003e models provide many valuable processing tools including standard mixers, gain sharing auto-mixers, delays, equalizers, level controls, duckers, filters, and dozens of other processing capabilities.\u003c\/p\u003e\u003cp\u003eThis model includes 16 inputs and 16 outputs using Phoenix style connectors. BlueBridge\u003csup\u003e®\u003c\/sup\u003e additionally works with the Atlas BluePanel software which enables the designer to create custom interfaces that can be accessed via a computer connected to the network. BluePanel can also be used to program wall controllers including the BB-TOUCH7 touch panel giving the user access to the system's functionality for volume control, source selection, room combining, or any other function the designer programs. This enables the end user to have some control over the system without having to access the BlueBridge\u003csup\u003e®\u003c\/sup\u003e device directly preventing any unauthorized changes from happening within the device.\u003c\/p\u003e\u003cp\u003eAtlasIED offers pre-configured design templates that can be used as starting points for a variety of DSP applications. These design templates are available as part of Atlas' BlueBridge\u003csup\u003e®\u003c\/sup\u003e training program which is available to active AtlasIED customers.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 16 Input \/ 16 Output Configuration \u003c\/li\u003e \u003cli\u003e Open Architecture Programmability \u003c\/li\u003e \u003cli\u003e High Quality THAT® Corp Microphone Preamps \u003c\/li\u003e \u003cli\u003e Ethernet Network Connectivity \u003c\/li\u003e \u003cli\u003e TCP\/IP Third Party Control Capability \u003c\/li\u003e \u003cli\u003e Ultra Low Noise Floor \u003c\/li\u003e \u003cli\u003e Four Logic Inputs\/Outputs \u003c\/li\u003e \u003cli\u003e 48kHz, 40 Bit Floating DSP Engine \u003c\/li\u003e \u003cli\u003e Safety Listed to UL60065 \u003c\/li\u003e \u003cli\u003e EQ Modules: Parametric, Graphic, and Anti-Feedback \u003c\/li\u003e \u003cli\u003e Crossover Modules: Butterworth, Linkwitz Riley, Bessel, Slopes: 6 to 48dB per Octave \u003c\/li\u003e \u003cli\u003e Filter Modules: High Shelf, Low Shelf, All Pass \u003c\/li\u003e \u003cli\u003e Mixer Modules: Gain Sharing Auto-Mixer, Gating Auto-Mixer, Matrix Mixer, Standard Mixer, LR Mixer, LCR Mixer \u003c\/li\u003e \u003cli\u003e Generator Modules: Sine Tone, Sign Sweep, White, Pink \u003c\/li\u003e \u003cli\u003e Dynamics Modules: Compressor, Expander, Limiter, Ducker \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eInputs\u003c\/td\u003e \u003ctd\u003e16\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSafety Listed\u003c\/td\u003e \u003ctd\u003eListed to UL60005\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOutputs\u003c\/td\u003e \u003ctd\u003e16\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput Type\u003c\/td\u003e \u003ctd\u003eMicrophone or Line, Software Selectable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOutput Type\u003c\/td\u003e \u003ctd\u003eLine\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eRAID\u003c\/td\u003e \u003ctd\u003e40-Bit Floating Point\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAnalog Converters\u003c\/td\u003e \u003ctd\u003eHigh Performance 24-Bit\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePhantom Power\u003c\/td\u003e \u003ctd\u003e48V, Software Enabled\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput impedance\u003c\/td\u003e \u003ctd\u003e\u0026gt;10kΩ\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDynamic Range\u003c\/td\u003e \u003ctd\u003e110dB Type (Unweighted)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eLatency\u003c\/td\u003e \u003ctd\u003e5ms\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCMRR\u003c\/td\u003e \u003ctd\u003e\u0026gt;100dB (50Hz-10khz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDistortion\u003c\/td\u003e \u003ctd\u003e0.002% (1kHz @ +4dBu)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eConfiguration Electronically Balanced Gain\u003c\/td\u003e \u003ctd\u003e-100 to +15dB in 0.25dB Steps\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Consumption\u003c\/td\u003e \u003ctd\u003e18.5W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePolarity\u003c\/td\u003e \u003ctd\u003e+\/-, GUI Selectable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e20Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e1.75\" (44mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e19\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e9\" (229mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight\u003c\/td\u003e \u003ctd\u003e7.2 lbs \/ 3.25 kg \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 36 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886874132523,"sku":"AS-BB-1616","price":4756.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/BB-1616-1__41436.1731434488.1280.1280.png?v=1775672912"},{"product_id":"atlas-sound-bb-1616dt","title":"Atlas Sound BB-1616DT","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAtlasIED BlueBridge\u003csup\u003e®\u003c\/sup\u003e networkable DSP devices are powerful and flexible tools offering mission critical solutions to satisfy the exact needs of any installation. Engineered to strict standards with the highest quality internal components, BlueBridge\u003csup\u003e®\u003c\/sup\u003e devices provide pure clean audio, Ethernet connectivity for cost effective TCP\/IP control and easy programmability. Intended for a variety of audio applications, BlueBridge\u003csup\u003e®\u003c\/sup\u003e DSP platforms are cost effective solutions for the most demanding applications including video conferencing, house of worship, presentation rooms, conference rooms, courtrooms, room combining, restaurants, multi-zone paging,  background music , and many other sound reinforcement and AV applications.\u003c\/p\u003e\u003cp\u003eThe BlueBridge\u003csup\u003e®\u003c\/sup\u003e family of products feature open architecture, drag and drop software that makes them incredibly easy to use. Each model utilizes high quality THAT\u003csup\u003e®\u003c\/sup\u003e microphone preamps  and 24 Bit converters to obtain an ultra-low noise floor while still maintaining a smooth sound that satisfies the needs of demanding clients, with the flexibility and control a system designer requires. BlueBridge\u003csup\u003e®\u003c\/sup\u003e models use a 40 Bit Floating Point DSP engine to prevent digital clipping that commonly occurs in other DSP products and to obtain maximum speed and power to process advanced algorithms in complex system designs. BlueBridge\u003csup\u003e®\u003c\/sup\u003e DSP units can operate on any network while the optional control accessories require a PoE switch. BlueBridge® devices need to be connected to the network during set-up and if control is required but can be applied in many instances where network control is unnecessary or unavailable like live speech applications. When connected to a network, each BlueBridge\u003csup\u003e®\u003c\/sup\u003e processor on the network will be auto recognized and controllable. BlueBridge\u003csup\u003e®\u003c\/sup\u003e models provide many valuable processing tools including standard mixers, gain sharing auto-mixers, delays, equalizers, level controls, duckers, filters, and dozens of other processing capabilities.\u003c\/p\u003e\u003cp\u003eThis model includes 16 inputs and 16 outputs using Phoenix style connectors. BlueBridge\u003csup\u003e®\u003c\/sup\u003e additionally works with the Atlas BluePanel software which enables the designer to create custom interfaces that can be accessed via a computer connected to the network. BluePanel can also be used to program wall controllers including the BB-TOUCH7 touch panel giving the user access to the system's functionality for volume control, source selection, room combining, or any other function the designer programs. This enables the end user to have some control over the system without having to access the  BlueBridge\u003csup\u003e®\u003c\/sup\u003e device  directly preventing any unauthorized changes from happening within the device.\u003c\/p\u003e\u003cp\u003eAtlasIED offers pre-configured design templates that can be used as starting points for a variety of DSP applications. These design templates are available as part of Atlas' BlueBridge\u003csup\u003e®\u003c\/sup\u003e training program which is available to active AtlasIED customers.\u003c\/p\u003e\u003cp\u003eThe BB-1616DT incorporates Dante™ technology and is capable of being integrated into new or existing systems that are using a Dante™ network. This devices offers 16 channels of self-configuring, true plug-and-play digital audio over an Ethernet network providing the highest quality audio over existing network infrastructure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 16 Input \/ 16 Output Configuration with Dante™ \u003c\/li\u003e \u003cli\u003e Open Architecture Programmability \u003c\/li\u003e \u003cli\u003e True Plug and Play Digital Audio Networking \u003c\/li\u003e \u003cli\u003e 16 Channels of Digital Audio Over Ethernet (Dante™) \u003c\/li\u003e \u003cli\u003e High Quality THAT® Corp Microphone Preamps \u003c\/li\u003e \u003cli\u003e Ultra Low Noise Floor \u003c\/li\u003e \u003cli\u003e Four Logic Inputs\/Outputs \u003c\/li\u003e \u003cli\u003e 48kHz, 40 Bit Floating DSP Engine \u003c\/li\u003e \u003cli\u003e Safety Listed to UL60065 \u003c\/li\u003e \u003cli\u003e EQ Modules: Parametric, Graphic, and Anti-Feedback \u003c\/li\u003e \u003cli\u003e Crossover Modules: Butterworth, Linkwitz Riley, Bessel, Slopes: 6 to 48dB per Octave \u003c\/li\u003e \u003cli\u003e Filter Modules: High Shelf, Low Shelf, All Pass \u003c\/li\u003e \u003cli\u003e Mixer Modules: Gain Sharing Auto-Mixer, Gating Auto-Mixer, Matrix Mixer, Standard Mixer, LR Mixer, LCR Mixer \u003c\/li\u003e \u003cli\u003e Generator Modules: Sine Tone, Sign Sweep, White, Pink \u003c\/li\u003e \u003cli\u003e Dynamics Modules: Compressor, Expander, Limiter, Ducker \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eInputs\u003c\/td\u003e \u003ctd\u003e16\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSafety Listed\u003c\/td\u003e \u003ctd\u003eListed to UL60005\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOutputs\u003c\/td\u003e \u003ctd\u003e16\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput Type\u003c\/td\u003e \u003ctd\u003eMicrophone or Line, Software Selectable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOutput Type\u003c\/td\u003e \u003ctd\u003eLine\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eRAID\u003c\/td\u003e \u003ctd\u003e40-Bit Floating Point\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAnalog Converters\u003c\/td\u003e \u003ctd\u003eHigh Performance 24-Bit\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePhantom Power\u003c\/td\u003e \u003ctd\u003e48V, Software Enabled\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput impedance\u003c\/td\u003e \u003ctd\u003e\u0026gt;10kΩ\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDynamic Range\u003c\/td\u003e \u003ctd\u003e110dB Type (Unweighted)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eLatency\u003c\/td\u003e \u003ctd\u003e3ms\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCMRR\u003c\/td\u003e \u003ctd\u003e\u0026gt;100dB (50Hz-10khz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDistortion\u003c\/td\u003e \u003ctd\u003e0.002% (1kHz @ +4dBu)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eConfiguration Electronically Balanced Gain\u003c\/td\u003e \u003ctd\u003e-100 to +15dB in 0.25dB Steps\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Consumption\u003c\/td\u003e \u003ctd\u003e18.5W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePolarity\u003c\/td\u003e \u003ctd\u003e+\/-, GUI Selectable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e20Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e1.75\" (44mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e19\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e9\" (229mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight\u003c\/td\u003e \u003ctd\u003e7.2 lbs \/ 3.25 kg \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 36 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886874165291,"sku":"AS-BB-1616DT","price":5405.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/BB-1616DT-2__84852.1731434502.1280.1280.png?v=1775672913"},{"product_id":"atlas-sound-bb-168","title":"Atlas Sound BB-168","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAtlasIED BlueBridge\u003csup\u003e®\u003c\/sup\u003e networkable DSP devices are powerful and flexible tools offering mission critical solutions to satisfy the exact needs of any installation. Engineered to strict standards with the highest quality internal components, BlueBridge\u003csup\u003e®\u003c\/sup\u003e devices provide pure clean audio, Ethernet connectivity for cost effective TCP\/IP control and easy programmability. Intended for a variety of audio applications, BlueBridge\u003csup\u003e®\u003c\/sup\u003e DSP platforms are cost effective solutions for the most demanding applications including video conferencing, house of worship, presentation rooms, conference rooms, courtrooms, room combining, restaurants, multi-zone paging, background music, and many other sound reinforcement and AV applications.\u003c\/p\u003e\u003cp\u003eThe BlueBridge\u003csup\u003e®\u003c\/sup\u003e family of products feature open architecture, drag and drop software that makes them incredibly easy to use. Each model utilizes high quality THAT\u003csup\u003e®\u003c\/sup\u003e microphone preamps and 24 Bit converters to obtain an ultra-low noise floor while still maintaining a smooth sound that satisfies the needs of demanding clients, with the flexibility and control a system designer requires. BlueBridge\u003csup\u003e®\u003c\/sup\u003e models use a 40 Bit Floating Point DSP engine to prevent digital clipping that commonly occurs in other DSP products and to obtain maximum speed and power to process advanced algorithms in complex system designs. BlueBridge\u003csup\u003e®\u003c\/sup\u003e DSP units can operate on any network while the optional control accessories require a PoE switch. BlueBridge\u003csup\u003e®\u003c\/sup\u003e devices need to be connected to the network during set-up and if control is required but can be applied in many instances where network control is unnecessary or unavailable like live speech applications. When connected to a network, each BlueBridge\u003csup\u003e®\u003c\/sup\u003e processor on the network will be auto recognized and controllable. BlueBridge\u003csup\u003e®\u003c\/sup\u003e models provide many valuable processing tools including standard mixers, gain sharing auto-mixers, delays, equalizers, level controls, duckers, filters, and dozens of other processing capabilities.\u003c\/p\u003e\u003cp\u003eThis model includes 16 inputs and 8 outputs using Phoenix style connectors. BlueBridge\u003csup\u003e®\u003c\/sup\u003e additionally works with the Atlas BluePanel software which enables the designer to create custom interfaces that can be accessed via a computer connected to the network. BluePanel can also be used to program wall controllers including the BB-TOUCH7 touch panel giving the user access to the system's functionality for volume control, source selection, room combining, or any other function the designer programs. This enables the end user to have some control over the system without having to access the BlueBridge\u003csup\u003e®\u003c\/sup\u003e device directly preventing any unauthorized changes from happening within the device.\u003c\/p\u003e\u003cp\u003eAtlasIED offers pre-configured design templates that can be used as starting points for a variety of DSP applications. These design templates are available as part of Atlas' BlueBridge\u003csup\u003e®\u003c\/sup\u003e training program which is available to active AtlasIED customers.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 16 Input \/ 8 Output Configuration \u003c\/li\u003e \u003cli\u003e Open Architecture Programmability \u003c\/li\u003e \u003cli\u003e High Quality THAT® Corp Microphone Preamps \u003c\/li\u003e \u003cli\u003e Ethernet Network Connectivity \u003c\/li\u003e \u003cli\u003e TCP\/IP Third Party Control Capability \u003c\/li\u003e \u003cli\u003e Ultra Low Noise Floor \u003c\/li\u003e \u003cli\u003e Four Logic Inputs\/Outputs \u003c\/li\u003e \u003cli\u003e 48kHz, 40 Bit Floating DSP Engine \u003c\/li\u003e \u003cli\u003e Safety Listed to UL60065 \u003c\/li\u003e \u003cli\u003e EQ Modules: Parametric, Graphic, and Anti-Feedback \u003c\/li\u003e \u003cli\u003e Crossover Modules: Butterworth, Linkwitz Riley, Bessel, Slopes: 6 to 48dB per Octave \u003c\/li\u003e \u003cli\u003e Filter Modules: High Shelf, Low Shelf, All Pass \u003c\/li\u003e \u003cli\u003e Mixer Modules: Gain Sharing Auto-Mixer, Gating Auto-Mixer, Matrix Mixer, Standard Mixer, LR Mixer, LCR Mixer \u003c\/li\u003e \u003cli\u003e Generator Modules: Sine Tone, Sign Sweep, White, Pink \u003c\/li\u003e \u003cli\u003e Dynamics Modules: Compressor, Expander, Limiter, Ducker \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eInputs\u003c\/td\u003e \u003ctd\u003e16\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSafety Listed\u003c\/td\u003e \u003ctd\u003eListed to UL60005\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOutputs\u003c\/td\u003e \u003ctd\u003e8\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput Type\u003c\/td\u003e \u003ctd\u003eMicrophone or Line, Software Selectable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOutput Type\u003c\/td\u003e \u003ctd\u003eLine\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eRAID\u003c\/td\u003e \u003ctd\u003e40-Bit Floating Point\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAnalog Converters\u003c\/td\u003e \u003ctd\u003eHigh Performance 24-Bit\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePhantom Power\u003c\/td\u003e \u003ctd\u003e48V, Software Enabled\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput impedance\u003c\/td\u003e \u003ctd\u003e\u0026gt;10kΩ\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDynamic Range\u003c\/td\u003e \u003ctd\u003e110dB Type (Unweighted)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eLatency\u003c\/td\u003e \u003ctd\u003e5ms\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCMRR\u003c\/td\u003e \u003ctd\u003e\u0026gt;100dB (50Hz-10khz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDistortion\u003c\/td\u003e \u003ctd\u003e0.002% (1kHz @ +4dBu)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eConfiguration Electronically Balanced Gain\u003c\/td\u003e \u003ctd\u003e-100 to +15dB in 0.25dB Steps\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Consumption\u003c\/td\u003e \u003ctd\u003e18.5W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePolarity\u003c\/td\u003e \u003ctd\u003e+\/-, GUI Selectable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e20Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e1.75\" (44mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e19\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e9\" (229mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight\u003c\/td\u003e \u003ctd\u003e7.2 lbs \/ 3.25 kg \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 36 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886874198059,"sku":"AS-BB-168","price":4270.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/BB-168-3__25520.1731434547.1280.1280.png?v=1775672913"},{"product_id":"atlas-sound-bb-168aecdt","title":"Atlas Sound BB-168AECDT","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe BlueBridge\u003csup\u003e®\u003c\/sup\u003e BB-168AECDT networkable DSP devices with Acoustic Echo Cancellation and Dante™ is a powerful and flexible tool offering mission critical solutions to successfully satisfy your customers’ teleconferencing and video conferencing needs. Engineered to strict standards with the highest quality internal components,  BlueBridge\u003csup\u003e®\u003c\/sup\u003e DSP solutions  provide pure clean analog and digital audio, Ethernet connectivity for cost effective TCP\/IP control and open architecture with Drag and Drop programmability. AtlasIED offers the widest range of open architecture DSP platform I\/O configurations of any manufacturer in the industry, all configured using the same software.\u003c\/p\u003e\u003cp\u003eThe BlueBridge\u003csup\u003e®\u003c\/sup\u003e AEC model with the Dante™ digital audio network  chipset offers up to 16 channels of self-configuring, true plug-and-play digital audio over an Ethernet network providing the highest quality audio over existing network infrastructure.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Wide-Band Acoustic Echo Cancellation \u003c\/li\u003e \u003cli\u003e Dante™ Ethernet Based Digital Audio \u003c\/li\u003e \u003cli\u003e True Plug-and-Play Digital Audio Networking \u003c\/li\u003e \u003cli\u003e 16x8 I\/O Configuration \u003c\/li\u003e \u003cli\u003e Open Architecture Programmability \u003c\/li\u003e \u003cli\u003e High Quality THAT® Corporation Mic Preamps \u003c\/li\u003e \u003cli\u003e TCP\/IP Third Party Control Capability \u003c\/li\u003e \u003cli\u003e Four Logic Inputs \u0026amp; Outputs \u003c\/li\u003e \u003cli\u003e 48kHz, 40 Bit Floating DSP Engine \u003c\/li\u003e \u003cli\u003e Remote Control Using Optional Wall Plates \u003c\/li\u003e \u003cli\u003e Output Peak \u0026amp; Signal Indicator LEDs \u003c\/li\u003e \u003cli\u003e Safety Listed to UL60065 \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eInput Type\u003c\/td\u003e \u003ctd\u003eMic or Line, GUI Selectable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Requirement\u003c\/td\u003e \u003ctd\u003e90-240VAC (50-60Hz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput Gain\u003c\/td\u003e \u003ctd\u003e-40 to +15dB in 0.25 dB steps\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePhantom Power\u003c\/td\u003e \u003ctd\u003e48V, GUI Enabled\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOutput Type\u003c\/td\u003e \u003ctd\u003eLine\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOutput impedance\u003c\/td\u003e \u003ctd\u003e50Ω\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eRAID\u003c\/td\u003e \u003ctd\u003e40-Bit Floating Point\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSample Rate\u003c\/td\u003e \u003ctd\u003e48kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAnalog Converters\u003c\/td\u003e \u003ctd\u003eHigh Performance 24-Bit\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e19\" (483mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e1.75\" (44mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e9\" (229mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 36 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886874230827,"sku":"AS-BB-168AECDT","price":5945.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/BB-168AECDT-1__70858.1731434575.1280.1280.png?v=1775672913"},{"product_id":"atlas-sound-bb-168dt","title":"Atlas Sound BB-168DT","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAtlasIED BlueBridge\u003csup\u003e®\u003c\/sup\u003e networkable DSP devices are powerful and flexible tools offering mission critical solutions to satisfy the exact needs of any installation. Engineered to strict standards with the highest quality internal components, BlueBridge\u003csup\u003e®\u003c\/sup\u003e devices provide pure clean audio, Ethernet connectivity for cost effective TCP\/IP control and easy programmability. Intended for a variety of audio applications, BlueBridge\u003csup\u003e®\u003c\/sup\u003e DSP platforms are cost effective solutions for the most demanding applications including video conferencing, house of worship, presentation rooms, conference rooms, courtrooms, room combining, restaurants, multi-zone paging, background music, and many other sound reinforcement and AV applications.\u003c\/p\u003e\u003cp\u003eThe BlueBridge\u003csup\u003e®\u003c\/sup\u003e family of products feature open architecture, drag and drop software that makes them incredibly easy to use. Each model utilizes high quality THAT\u003csup\u003e®\u003c\/sup\u003e microphone preamps and 24 Bit converters to obtain an ultra-low noise floor while still maintaining a smooth sound that satisfies the needs of demanding clients, with the flexibility and control a system designer requires. BlueBridge\u003csup\u003e®\u003c\/sup\u003e models use a 40 Bit Floating Point DSP engine to prevent digital clipping that commonly occurs in other DSP products and to obtain maximum speed and power to process advanced algorithms in complex system designs. BlueBridge\u003csup\u003e®\u003c\/sup\u003e DSP units can operate on any network while the optional control accessories require a PoE switch. BlueBridge\u003csup\u003e®\u003c\/sup\u003e devices need to be connected to the network during set-up and if control is required but can be applied in many instances where network control is unnecessary or unavailable like live speech applications. When connected to a network, each BlueBridge\u003csup\u003e®\u003c\/sup\u003e processor on the network will be auto recognized and controllable. BlueBridge\u003csup\u003e®\u003c\/sup\u003e models provide many valuable processing tools including standard mixers, gain sharing auto-mixers, delays, equalizers, level controls, duckers, filters, and dozens of other processing capabilities.\u003c\/p\u003e\u003cp\u003eThis model includes 16 inputs and 8 outputs using Phoenix style connectors. BlueBridge\u003csup\u003e®\u003c\/sup\u003e additionally works with the Atlas BluePanel software which enables the designer to create custom interfaces that can be accessed via a computer connected to the network. BluePanel can also be used to program wall controllers including the BB-TOUCH7 touch panel giving the user access to the system's functionality for volume control, source selection, room combining, or any other function the designer programs. This enables the end user to have some control over the system without having to access the BlueBridge\u003csup\u003e®\u003c\/sup\u003e device directly preventing any unauthorized changes from happening within the device.\u003c\/p\u003e\u003cp\u003eAtlasIED offers pre-configured design templates that can be used as starting points for a variety of DSP applications. These design templates are available as part of Atlas' BlueBridge\u003csup\u003e®\u003c\/sup\u003e training program which is available to active AtlasIED customers.\u003c\/p\u003e\u003cp\u003eThe BB-168DT incorporates Dante™ technology and is capable of being integrated into new or existing systems that are using a Dante™ network. This devices offers 16 channels of self-configuring, true plug-and-play digital audio over an Ethernet network providing the highest quality audio over existing network infrastructure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 16 Input \/ 8 Output Configuration with Dante™ \u003c\/li\u003e \u003cli\u003e Open Architecture Programmability \u003c\/li\u003e \u003cli\u003e True Plug and Play Digital Audio Networking \u003c\/li\u003e \u003cli\u003e 16 Channels of Digital Audio Over Ethernet (Dante™) \u003c\/li\u003e \u003cli\u003e High Quality THAT® Corp Microphone Preamps \u003c\/li\u003e \u003cli\u003e Ultra Low Noise Floor \u003c\/li\u003e \u003cli\u003e Four Logic Inputs\/Outputs \u003c\/li\u003e \u003cli\u003e 48kHz, 40 Bit Floating DSP Engine \u003c\/li\u003e \u003cli\u003e Safety Listed to UL60065 \u003c\/li\u003e \u003cli\u003e EQ Modules: Parametric, Graphic, and Anti-Feedback \u003c\/li\u003e \u003cli\u003e Crossover Modules: Butterworth, Linkwitz Riley, Bessel, Slopes: 6 to 48dB per Octave \u003c\/li\u003e \u003cli\u003e Filter Modules: High Shelf, Low Shelf, All Pass \u003c\/li\u003e \u003cli\u003e Mixer Modules: Gain Sharing Auto-Mixer, Gating Auto-Mixer, Matrix Mixer, Standard Mixer, LR Mixer, LCR Mixer \u003c\/li\u003e \u003cli\u003e Generator Modules: Sine Tone, Sign Sweep, White, Pink \u003c\/li\u003e \u003cli\u003e Dynamics Modules: Compressor, Expander, Limiter, Ducker \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e  \u003ctable\u003e \u003ctbody\u003e\n\u003ctr\u003e \u003ctd\u003eInputs\u003c\/td\u003e \u003ctd\u003e16\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSafety Listed\u003c\/td\u003e \u003ctd\u003eListed to UL60005\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOutputs\u003c\/td\u003e \u003ctd\u003e8\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput Type\u003c\/td\u003e \u003ctd\u003eMicrophone or Line, Software Selectable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOutput Type\u003c\/td\u003e \u003ctd\u003eLine\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eRAID\u003c\/td\u003e \u003ctd\u003e40-Bit Floating Point\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAnalog Converters\u003c\/td\u003e \u003ctd\u003eHigh Performance 24-Bit\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePhantom Power\u003c\/td\u003e \u003ctd\u003e48V, Software Enabled\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput impedance\u003c\/td\u003e \u003ctd\u003e\u0026gt;10kΩ\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDynamic Range\u003c\/td\u003e \u003ctd\u003e110dB Type (Unweighted)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eLatency\u003c\/td\u003e \u003ctd\u003e5ms\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCMRR\u003c\/td\u003e \u003ctd\u003e\u0026gt;100dB (50Hz-10khz)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDistortion\u003c\/td\u003e \u003ctd\u003e0.002% (1kHz @ +4dBu)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eConfiguration Electronically Balanced Gain\u003c\/td\u003e \u003ctd\u003e-100 to +15dB in 0.25dB Steps\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower Consumption\u003c\/td\u003e \u003ctd\u003e18.5W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePolarity\u003c\/td\u003e \u003ctd\u003e+\/-, GUI Selectable\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrequency Response\u003c\/td\u003e \u003ctd\u003e20Hz - 20kHz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd\u003e1.75\" (44mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd\u003e19\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd\u003e9\" (229mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWeight\u003c\/td\u003e \u003ctd\u003e7.2 lbs \/ 3.25 kg \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWarranty Period\u003c\/td\u003e \u003ctd\u003e 36 months from date of purchase \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Atlas Sound","offers":[{"title":"Default Title","offer_id":43886874460203,"sku":"AS-BB-168DT","price":4918.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/BB-168DT-3__54598.1731434559.1280.1280.png?v=1775672914"}],"url":"https:\/\/www.empirepro.com\/collections\/signal-processing.oembed","provider":"Empire Pro","version":"1.0","type":"link"}