{"product_id":"art-sla4","title":"ART SLA4","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOffering superb sound quality, the ART SLA-4 studio linear power amplifier delivers the clean power you need for any professional audio application including project or professional studio environments or commercial sound installations.\u003c\/p\u003e\n\u003cp\u003eSLA-4 Applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe SLA-4 is a true four-channel amplifier in a single rack-space that can be switched easily from Multi-channel, Stereo and Bridged Mono Modes\u003c\/li\u003e\n\u003cli\u003eSeparate mode switches allow you to bridge channels 1 and 2, or channels 3 and 4, or both channel pairs\u003c\/li\u003e\n\u003cli\u003eMaximizes flexibility by allowing the amp to be configured for best utilization in 2, 3, or 4 channel applications\u003c\/li\u003e\n\u003cli\u003eDesigned for long-term reliability in any audio application, the SLA-4’s output is fully protected from short circuits.\u003c\/li\u003e\n\u003cli\u003eAn ultrasonic network decouples RF from the output and helps keep the amplifier stable with reactive loads\u003c\/li\u003e\n\u003cli\u003eSLA-4 is stable into loads as low as 2 ohms (stereo mode) or 4 ohms (bridged mode) making it ideal for virtually any installation application or complex system configuration\u003c\/li\u003e\n\u003cli\u003eThe SLA-4 features SmartFan, an advanced, thermal dependent fan assisted convection cooled system.\u003c\/li\u003e\n\u003cli\u003eThe SmartFan system is dependent upon the internal ambient temperature of the unit, and runs at high or low levels depending on the amplifier’s cooling needs\u003c\/li\u003e\n\u003cli\u003e1\/4-inch TRS and Euroblock balanced inputs as well as multi-way output binding posts are ensure the SLA4 can be quickly and easily tied in to any system without modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtremely Low Noise, Discrete Linear Design\u003c\/li\u003e\n\u003cli\u003e4 x 100 watts\/Ch @ 8 ohms, 140 watts\/Ch @ 4 ohms\u003c\/li\u003e\n\u003cli\u003e2 x 200 watts\/Ch @ 16 ohms, 280 watts\/Ch @ 8 ohms (bridged)\u003c\/li\u003e\n\u003cli\u003e2 x 100 watts\/Ch @ 8 ohms \u0026amp; 1 x 280 watts @ 8 ohms (bridged)\u003c\/li\u003e\n\u003cli\u003eToroidal Transformer\u003c\/li\u003e\n\u003cli\u003e10 Hz to 40 kHz Frequency Response\u003c\/li\u003e\n\u003cli\u003e1\/4-inch TRS, and Euroblock Balanced Inputs\u003c\/li\u003e\n\u003cli\u003eRecessed “Pop Out” Detented Gain Knobs\u003c\/li\u003e\n\u003cli\u003eMulti-way Binding Post Outputs\u003c\/li\u003e\n\u003cli\u003eLow Profile 1U Rack-Mountable Design\u003c\/li\u003e\n\u003cli\u003eSmartFan Silent Cooling System\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBridged Output Power, 16 Ohms: 2 x 200W\/Channel RMS\u003c\/li\u003e\n\u003cli\u003eBridged Output Power, 8 Ohms: 2 x 280W\/Channel RMS\u003c\/li\u003e\n\u003cli\u003eCMRR: \u0026gt; 60dB (typical @1kHz)\u003c\/li\u003e\n\u003cli\u003eDamping Factor: \u0026gt; 100\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 10Hz to 40kHz, +\/- 0.5dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: \u0026lt;0.05% (typical)\u003c\/li\u003e\n\u003cli\u003eHum and Noise: \u0026gt; 100dB below clipping\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 44k Ω (balanced) \/ 22k Ω (unbalanced)\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity: 1V for full power output into 8 Ω\u003c\/li\u003e\n\u003cli\u003eInput\/Output Connections: 1\/4-inch TRS\/Euroblock (Input) \/ Multi-Way Binding\u003c\/li\u003e\n\u003cli\u003eMinimum Load Impedance, Mono: 4 Ω (Bridged)\u003c\/li\u003e\n\u003cli\u003eMinimum Load Impedance, Stereo: 2 Ω (Stereo)\u003c\/li\u003e\n\u003cli\u003eSlew Rate: \u0026gt; 20V\/uS\u003c\/li\u003e\n\u003cli\u003eStereo Output Power, 4 ohms: 4 x 140 W\/Channel RMS\u003c\/li\u003e\n\u003cli\u003eStereo Output Power, 8 ohms: 4 x 100W \/Channel RMS\u003c\/li\u003e\n\u003cli\u003eTransformer Type: Toroidal\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.75″ x 19″ x 13.5″ \/ 44.5mm x 483mm x 190.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 19.8lbs (9.0kg)\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 120VAC 60Hz 1000 W (max)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":43886853816363,"sku":"ART-SLA4","price":331.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/amps-sla4-front__41069.1725520557.1280.1280.jpg?v=1775672757","url":"https:\/\/www.empirepro.com\/products\/art-sla4","provider":"Empire Pro","version":"1.0","type":"link"}