{"product_id":"audio-technica-atnd1061dan","title":"Audio Technica ATND1061DAN","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ATND1061 beamforming microphone array is available in two configurations:\u003c\/p\u003e\n\u003cp\u003eATND1061DAN – Dante™-enabled\u003c\/p\u003e\n\u003cp\u003eATND1061LK – Audio-Technica LINK enabled\u003c\/p\u003e\n\u003cp\u003eThe ATND1061 Beamforming Ceiling Array Microphone is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small. The microphone may be used singly or in multiples (for larger meeting spaces) to capture every person speaking in a room with clear, natural audio that reduces distracting environmental sounds. A state-of-the-art professional product in a familiar form factor (roughly the size of a wireless access point), the ATND1061 is easy to install, set up, and operate.\u003c\/p\u003e\n\u003cp\u003eRoom configuration, zone setup, and other settings are handled through the user-friendly Digital\u003c\/p\u003e\n\u003cp\u003eMicrophone Manager software application. The ATND1061 has six individual output channels, which, collectively, can be configured with up to 32 user-defined microphone pickup zones, providing the flexibility to cover a wide variety of room sizes and meeting types.\u003c\/p\u003e\n\u003cp\u003eOur proprietary voice activity detection (VAD) technology enables the microphone to discern between a voice and unwanted noises such as paper shuffling. For integrations without external digital signal processing (DSP), the ATND1061 features powerful onboard DSP, including automix, acoustic echo cancellation (AEC), noise reduction, automatic gain control (AGC), and 4-band EQ.\u003c\/p\u003e\n\u003cp\u003eExclusion zones can be set to avoid known sources of unwanted noise (such as air-handling systems), helping to maximize the effectiveness of the built-in noise-reduction and automatic-mixing functions.\u003c\/p\u003e\n\u003cp\u003eCoverage Zones\u003c\/p\u003e\n\u003cp\u003eOutput Channel 1 can be configured with 16 user-defined Coverage Zones, within which a meeting participant may be seated or move about while speaking. The beam will track and keep the microphone focused on the speaker’s voice, minimizing any room noise. Only one of the 16 Coverage Zones can be open at a time with the microphone automatically selecting the zone with the strongest signal identified as speech. Coverage Zones can be helpful in picking up either nonpriority or unplanned participants.\u003c\/p\u003e\n\u003cp\u003ePriority Zones\u003c\/p\u003e\n\u003cp\u003eOutput Channels 2–6 can be configured with 16 user-defined Priority Zones. Priority Zones ensure that participants in these zones, whether seated or moving about, receive priority over those in Coverage Zones. (However, Priority Zones can also be defined within an existing Coverage Zone.) A maximum of five Priority Zones can be open at a time, with each open zone selecting the strongest signal identified as speech. Priority Zones can be helpful in providing priority for a room’s known participant locations.\u003c\/p\u003e\n\u003cp\u003eAcross all the output channels, the microphone’s 90-degree orthogonal beams are capable of focusing on a particular point in space, preventing the pickup of unwanted noise.\u003c\/p\u003e\n\u003cp\u003eThe ATND1061 can be flush- or surface-mounted in a drop ceiling or hard ceiling, or mounted in open architecture spaces via a standard VESA mount. The ATND1061 is UL 2043 compliant for installation in plenum spaces. All mounts, safety wiring, mounting hardware, and accessories are included.\u003c\/p\u003e\n\u003cp\u003eAn IR remote is also included to allow users to quickly mute the microphone when a muting function is not available in the room configuration. The IR Remote can also be used to recall presets or toggle the Power Save Mode on and off.\u003c\/p\u003e\n\u003cp\u003eThe Dante-enabled ATND1061DAN has two network ports, which can be configured to fit any installation requirement. In “Single Cable Mode,” Dante audio and microphone control data are sent together over a single standard category cable. In “Split Mode,” Dante audio and microphone control data are sent separately over two category cables.\u003c\/p\u003e\n\u003cp\u003ePlug-ins are available for popular control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe ATND1061 beamforming microphone array is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small\u003c\/li\u003e\n\u003cli\u003eATND1061 is enabled with VISCA over IP to control PTZ (pan-tilt-zoom) cameras and other video equipment over a network and sync with microphone audio \u003c\/li\u003e\n\u003cli\u003eATND1061 is equipped with voice lift technology that allows everyone in a large meeting space to hear equally well – regardless of how far away they are from the person speaking \u003c\/li\u003e\n\u003cli\u003ePowerful onboard DSP: automix, acoustic echo cancelation, noise reduction, automatic gain control, and 4-band EQ\u003c\/li\u003e\n\u003cli\u003eUser-friendly Digital Microphone Manager software easily configures single or multiple ATND1061 microphone settings\u003c\/li\u003e\n\u003cli\u003eSix individual output channels with up to 32 user-defined microphone pickup zones provide the flexibility to cover a wide variety of room sizes and meeting types\u003c\/li\u003e\n\u003cli\u003eOutput Channel 1 can be configured with up to 16 user-defined Coverage Zones to ensure coverage of nonpriority or unplanned participants\u003c\/li\u003e\n\u003cli\u003eOutput Channels 2–6 can be configured with up to 16 user-defined Priority Zones to ensure priority pickup of participants in known locations\u003c\/li\u003e\n\u003cli\u003eProprietary voice activity detection (VAD) technology enables the microphone to discern between a voice and unwanted noises such as paper shuffling\u003c\/li\u003e\n\u003cli\u003eExclusion zones can be set in the software to avoid known sources of unwanted noise (such as air-handling systems)\u003c\/li\u003e\n\u003cli\u003eTwo network ports with Single Cable and Split modes to send Dante audio and microphone control data together or separately over category cable (ATND1061DAN)\u003c\/li\u003e\n\u003cli\u003eMounts flush or on the surface of a drop ceiling or hard ceiling, or in open architecture spaces using VESA mount\u003c\/li\u003e\n\u003cli\u003eUL 2043 compliant for installation in plenum spaces\u003c\/li\u003e\n\u003cli\u003eIncludes tile bridge, safety wiring, and mounting hardware and accessories\u003c\/li\u003e\n\u003cli\u003eLow-reflective white finish matches ceiling tiles in most environments\u003c\/li\u003e\n\u003cli\u003ePowered by network PoE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrophone\n\u003cul\u003e\n\u003cli\u003eBeam Width: 90-degrees\u003c\/li\u003e\n\u003cli\u003ePolar Pattern: Beam pattern\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 60 Hz to 18,000 Hz\u003c\/li\u003e\n\u003cli\u003eMaximum Input Sound Level: 102 dBSPL\u003c\/li\u003e\n\u003cli\u003eSensitivity: -8 dBFS (1 kHz, 94 dBSPL)\u003c\/li\u003e\n\u003cli\u003eDynamic Range: 89 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003eSignal-to-Noise Ratio: 61.5 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003eSelf-Noise: 25 dBSPL (A-weighted)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog Audio\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 20 Hz to 20 kHz (+1.0\/-2.0 dB)\u003c\/li\u003e\n\u003cli\u003eDynamic Range: 100 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio: 80 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003eHeadroom: 20 dB\u003c\/li\u003e\n\u003cli\u003eResidual Noise: -75.8 dBu (A-weighted)\u003c\/li\u003e\n\u003cli\u003eH.D: \u0026lt;0.1% (1 kHz, unity)\u003c\/li\u003e\n\u003cli\u003eAnalog Input:\n\u003cul\u003e\n\u003cli\u003eMIC Maximum: -30 dBu\u003c\/li\u003e\n\u003cli\u003eMIC Unity: -50 dBu\u003c\/li\u003e\n\u003cli\u003eLINE Maximum: +12.2 dBu\u003c\/li\u003e\n\u003cli\u003eLINE Unity: -10 dBV, Switchable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog Output:\n\u003cul\u003e\n\u003cli\u003eOUTPUT Maximum: +19.2 dBu\u003c\/li\u003e\n\u003cli\u003eOUTPUT Unity: +4 dBu\/-10 dBV\/-33 dBV, Switchable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eGeneral Specifications - Beamforming Array\n\u003cul\u003e\n\u003cli\u003ePower Requirement: PoE (IEEE 802.3af Class 0)\u003c\/li\u003e\n\u003cli\u003ePower Consumption: Max. 7 W\u003c\/li\u003e\n\u003cli\u003eOperation Temperature Range: 0°C to 40°C (32°F to 104°F)\u003c\/li\u003e\n\u003cli\u003eOperation Humidity Range: 25% to 85% (Non condensing)\u003c\/li\u003e\n\u003cli\u003eDimensions: 227.5 mm (9.0”) × 227.5 mm (9.0”) × 30 mm (1.2”) （W × D×H)\u003c\/li\u003e\n\u003cli\u003eWeight: 1250 g (44 oz)\u003c\/li\u003e\n\u003cli\u003eNetwork: Dante: 1 Gbps\u003c\/li\u003e\n\u003cli\u003eIP control: 100 Mbps\u003c\/li\u003e\n\u003cli\u003eDigital Audio:\n\u003cul\u003e\n\u003cli\u003eSampling rate: 48 kHz\u003c\/li\u003e\n\u003cli\u003eBit depth: 24 bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLatency:\n\u003cul\u003e\n\u003cli\u003eMicrophone (CH1 to CH6): 47 msec\u003c\/li\u003e\n\u003cli\u003eMicrophone (Auto Mix CH): 79 msec\u003c\/li\u003e\n\u003cli\u003eDante: Min. 250 usec, Max. 5 msec\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eI\/O Connector:\n\u003cul\u003e\n\u003cli\u003eNetwork\/Dante (ATND1061DAN): RJ-45\u003c\/li\u003e\n\u003cli\u003eA-T LINK (ATND1061LK): RJ-45\u003c\/li\u003e\n\u003cli\u003eAnalog input: Euroblock 3 pin\u003c\/li\u003e\n\u003cli\u003eAnalog output: Euroblock 3 pin\u003c\/li\u003e\n\u003cli\u003eGPI: Euroblock 3 pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhantom Power: Analog input: 12 V\u003c\/li\u003e\n\u003cli\u003eIncluded Accessories:\n\u003cul\u003e\n\u003cli\u003e・IR remote controller\u003c\/li\u003e\n\u003cli\u003eSurface mount adapter\u003c\/li\u003e\n\u003cli\u003eScrew (M4 × 50 mm) × 4\u003c\/li\u003e\n\u003cli\u003eFlush mount adapter\u003c\/li\u003e\n\u003cli\u003eFlush mount cover\u003c\/li\u003e\n\u003cli\u003eScrew (M4 × 10 mm) × 12\u003c\/li\u003e\n\u003cli\u003eHole cover\u003c\/li\u003e\n\u003cli\u003eNut × 4\u003c\/li\u003e\n\u003cli\u003eSnap bushing × 2\u003c\/li\u003e\n\u003cli\u003eTile bridge A × 2\u003c\/li\u003e\n\u003cli\u003eTile bridge B × 2\u003c\/li\u003e\n\u003cli\u003eTile bridge C × 4\u003c\/li\u003e\n\u003cli\u003eSeismic cable\u003c\/li\u003e\n\u003cli\u003eZip tie\u003c\/li\u003e\n\u003cli\u003eSafety belt\u003c\/li\u003e\n\u003cli\u003eEuroblock connector × 3\u003c\/li\u003e\n\u003cli\u003eInstallation template\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":43886952087595,"sku":"AT-ATND1061DAN","price":2549.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/atnd1061_01a__23657.1725863048.1280.1280.jpg?v=1775673506","url":"https:\/\/www.empirepro.com\/products\/audio-technica-atnd1061dan","provider":"Empire Pro","version":"1.0","type":"link"}