{"product_id":"dpa-3506a","title":"DPA 3506A","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eThe DPA Microphones d:dicate™ 3506A is a complete 4006A stereo kit with two carefully factory-matched phantom powered omnidirectional condenser microphones. The 4006As are matched within ±0.5 dB on both frequency range and sensitivity in the microphone's entire frequency bandwidth. With the 4006A, engineers, broadcasters and musicians alike can achieve extremely clean, natural and precise reproduction in a variety of applications. Ideal for A-B stereo pairs for symphonic concert hall recordings, the 4006A also excels on vocals and for close-miking instruments like grand piano, guitar, double bass and percussion.\u003c\/p\u003e\r\n\u003cp\u003eThe high sensitivity, low noise-floor and extremely linear frequency response of the microphone pair makes the 3506A the perfect choice for all professional A-B stereo recordings.\u003c\/p\u003e\r\n\u003cp\u003eA selection of acoustic modification accessories, including interchangeable protection grids and acoustic pressure equalizers, allows the 4006As to be acoustically transformed into different microphone versions, making it the most multifaceted mic in your collection and a tremendous value. By simply changing a grid or adding a ball, it is possible to gain several unique frequency responses and directional characteristics from a single mic. Furthermore, these grids and elements will not produce any phase shift, noise or distortion that would otherwise be introduced by an electrical filter.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDirectional characteristics: Omnidirectional\u003c\/li\u003e\r\n\u003cli\u003ePrinciple of operation: Pressure\u003c\/li\u003e\r\n\u003cli\u003eCartridge type: Pre-polarized condenser\u003c\/li\u003e\r\n\u003cli\u003eFrequency range: 10 Hz to 20 kHz\u003c\/li\u003e\r\n\u003cli\u003eFrequency range, ± 2 dB: 0 Hz to 20 kHz\u003c\/li\u003e\r\n\u003cli\u003eSensitivity, nominal, ±2 dB at 250 Hz: 40 mV\/Pa; -28 dB re. 1 V\/Pa\u003c\/li\u003e\r\n\u003cli\u003eEquivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))\u003c\/li\u003e\r\n\u003cli\u003eEquivalent noise level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)\u003c\/li\u003e\r\n\u003cli\u003eS\/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 79 dB(A)\u003c\/li\u003e\r\n\u003cli\u003eTotal Harmonic Distortion (THD): \u0026lt; 1 % up to 139 dB SPL peak\u003c\/li\u003e\r\n\u003cli\u003eMinimum load impedance: 2 kOhms\u003c\/li\u003e\r\n\u003cli\u003eDynamic range: Typ. 124 dB\u003c\/li\u003e\r\n\u003cli\u003eMax. SPL, peak before clipping: 147 dB\u003c\/li\u003e\r\n\u003cli\u003eSwitchable attenuator: 0 dB \/ -20 dB\u003c\/li\u003e\r\n\u003cli\u003eOutput impedance: \u0026lt; 200 ohm\u003c\/li\u003e\r\n\u003cli\u003eCable drive capability: 100 m (328 ft)\u003c\/li\u003e\r\n\u003cli\u003eOutput balance principle: Impedance balancing with Active Drive\u003c\/li\u003e\r\n\u003cli\u003eCommon Mode Rejection Ratio (CMRR): \u0026gt; 60 dB\u003c\/li\u003e\r\n\u003cli\u003ePower supply (for full specifications): 48 V Phantom power (± 4 V)\u003c\/li\u003e\r\n\u003cli\u003eCurrent consumption: 2.8 mA\u003c\/li\u003e\r\n\u003cli\u003eConnector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase\u003c\/li\u003e\r\n\u003cli\u003eColor: Matte black\u003c\/li\u003e\r\n\u003cli\u003eWeight: 163 g (5.7 oz)\u003c\/li\u003e\r\n\u003cli\u003eMicrophone diameter: 16 to 19 mm (0.63\" to 0.75\")\u003c\/li\u003e\r\n\u003cli\u003eCapsule diameter: 16 mm (0.63\")\u003c\/li\u003e\r\n\u003cli\u003eMicrophone length: 170 mm (6.7\")\u003c\/li\u003e\r\n\u003cli\u003eOutput voltage, RMS: \u0026gt; 5 V\u003c\/li\u003e\r\n\u003cli\u003ePolarity: +V at Pin 2 for positive sound pressure\u003c\/li\u003e\r\n\u003cli\u003eTemperature range: -40 °C to 50 °C (-40 °F to 122 °F)\u003c\/li\u003e\r\n\u003cli\u003eRelative Humidity (RH): Up to 90 %\u003c\/li\u003e\r\n\u003cli\u003eClassification: Conforms to IEC 61672 Class I (with Near-field Grid DD0251)\u003c\/li\u003e\r\n\u003cli\u003eMatching tolerance (frequency response and sensitivity): ± 0.5 dB\u003c\/li\u003e\r\n\u003cli\u003ePhase deviation for kit: \u0026lt; 5°\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"DPA","offers":[{"title":"Default Title","offer_id":43888442310699,"sku":"DPA-3506A","price":7369.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/DPA_3506A-2__43929.1700459876.1280.1280.jpg?v=1775676489","url":"https:\/\/www.empirepro.com\/products\/dpa-3506a","provider":"Empire Pro","version":"1.0","type":"link"}