{"product_id":"dpa-4098-dc-d-b00-045","title":"DPA 4098-DC-D-B00-045","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA complete, supercardioid tabletop microphone solution, which is ideal for either permanently affixing to or temporarily placed on a table in conference venues, meeting rooms and board rooms.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutstanding audio quality\u003c\/li\u003e\n\u003cli\u003eSlim, elegant Scandinavian design\u003c\/li\u003e\n\u003cli\u003eHighly directional – very isolated\u003c\/li\u003e\n\u003cli\u003eHigh rejection of radio frequency interference\u003c\/li\u003e\n\u003cli\u003eMeets the needs of architects, AV consultants, system integrators and installing electricians\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis solution can be scaled up as needed. In smaller rooms you might only need one microphone to capture the best sound. In larger settings, you can use multiple mics to ensure each area of the room is completely covered. The best audio quality is obtained in a one-to-one solution – one microphone position close to one speaker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpeech intelligibility - low noise\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith very low noise and a high sensitivity, our ceiling and tabletop microphones offer the most clear, transparent, and natural sound available on the small footprint mic market. They ensure maximum speech intelligibility regardless of the acoustical environment. With a linear response, low distortion and an extremely large dynamic range, they sound great in any environment.\u003c\/p\u003e\n\u003cp\u003eThe Microphone Base is made specifically to work with the 4098 CORE Supercardioid Podium Microphone. It has an elegant yet unobtrusive design with a white, non-reflective surface and integrated shock mount. The audio cables are an integral part of the Microphone Base unit.\u003c\/p\u003e\n\u003cp\u003eThe Microphone Base fits most electrical back boxes and secures ease of installation. Furthermore, the great off-axis response and the physics of sound level vs distance, makes it possible to cover a small to mid-size room with only one or a few microphones. Read more about microphones in installed systems.\u003c\/p\u003e\n\u003cdiv id=\"panel-included\" class=\"tabs-panel is-active\" role=\"tabpanel\" aria-labelledby=\"panel-included-label\"\u003e\n\u003cdiv class=\"nx-product-description\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirectional Pattern: Supercardioid\u003c\/li\u003e\n\u003cli\u003ePrinciple of operation: Pressure gradient\u003c\/li\u003e\n\u003cli\u003eCartridge type: Pre-polarized condenser\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eDynamic range: Typ. 110 dB\u003c\/li\u003e\n\u003cli\u003eConnector: MicroDot\u003c\/li\u003e\n\u003cli\u003eEffective frequency range ±2 dB, at 20 cm (7.9 in)\n\u003cul\u003e\n\u003cli\u003eMicroDot: 80 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz\u003c\/li\u003e\n\u003cli\u003eXLR-3M: 100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSensitivity, nominal, ±3 dB at 1 kHz: 16 mV\/Pa; -36 dB re. 1 V\/Pa\u003c\/li\u003e\n\u003cli\u003eEquivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))\u003c\/li\u003e\n\u003cli\u003eEquivalent noise level, ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)\u003c\/li\u003e\n\u003cli\u003eDistortion, THD \u0026lt; 1%: 130 dB SPL RMS, 133 dB SPL peak\u003c\/li\u003e\n\u003cli\u003eMax. SPL, THD 10%: 135 dB SPL peak\u003c\/li\u003e\n\u003cli\u003eMinimum load impedance: 2 kΩ\u003c\/li\u003e\n\u003cli\u003eRated output impedance: From MicroDot: 30 - 40 Ω. From XLR connector or DAD6001-BC XLR Adapter: 100 Ω\u003c\/li\u003e\n\u003cli\u003eCable drive capability:\n\u003cul\u003e\n\u003cli\u003eMicroDot: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter\u003c\/li\u003e\n\u003cli\u003eXLR-3M: Up to 100 m (328 ft)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput balance principle: Signal balanced with XLR connector or DAD6001-BC XLR Adapter\u003c\/li\u003e\n\u003cli\u003eCommon mode rejection ratio (CMRR): \u0026gt; 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter\u003c\/li\u003e\n\u003cli\u003ePower supply (for full performance):\n\u003cul\u003e\n\u003cli\u003eMicroDot: Min. 5 V to max. 10 V through DPA adapter for wireless systems or\u003c\/li\u003e\n\u003cli\u003eP48 (Phantom Power) with DAD6001-BC XLR adapter\u003c\/li\u003e\n\u003cli\u003eXLR-3M: P48 (Phantom Power)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCurrent consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter\u003c\/li\u003e\n\u003cli\u003ePolarity: +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001-BC XLR adapter)\u003c\/li\u003e\n\u003cli\u003eMicrophone diameter: 5.7 mm (0.22 in)\u003c\/li\u003e\n\u003cli\u003eMicrophone length:\n\u003cul\u003e\n\u003cli\u003eMicrodot: 16 cm (6 in), 28 cm (11 in), 43 cm (17 in), 77 cm (30 in), 122 cm (48 in)\u003c\/li\u003e\n\u003cli\u003eXLR-3M: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTemperature range: -40°C to 45°C (-40°F to 113°F)\u003c\/li\u003e\n\u003cli\u003eRelative humidity (RH): Up to 90\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DPA","offers":[{"title":"Default Title","offer_id":43888448471083,"sku":"DPA-4098-DC-D-B00-045","price":794.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/4098-bm-d-045-dsign-4098-supercardioid-tabletop-mic-43-cm-17-in-black-microdot__10802.1682432623.1280.1280.jpg?v=1775676512","url":"https:\/\/www.empirepro.com\/products\/dpa-4098-dc-d-b00-045","provider":"Empire Pro","version":"1.0","type":"link"}