{"product_id":"dpa-4098-dc-f-b01-120","title":"DPA 4098-DC-F-B01-120","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCORE by DPA technology has been added to the 4098 floor stand microphone solutions, lifting sound quality even more, just like all of the other products using CORE technology. The 4098s dynamic range has been increased by 8 dB, so that the 1% THD is lifted significantly to 133 dB.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow noise and natural voice\u003c\/li\u003e\n\u003cli\u003eHighly directional for high isolation\u003c\/li\u003e\n\u003cli\u003eUniform, frequency independent directionality\u003c\/li\u003e\n\u003cli\u003eExclusive, elegant design\u003c\/li\u003e\n\u003cli\u003eIntegrated shock-mounting in floor base\u003c\/li\u003e\n\u003cli\u003eRapidly stabilizing microphone boom pole\u003c\/li\u003e\n\u003cli\u003eModular flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith very low noise and a high sensitivity, our supercardioid microphones offer the most clear, transparent, and natural sound available on the miniature mic market. The mics are capable of handling extremely high SPL before clipping. With a linear response, low distortion and an extremely large dynamic range, they sound great no matter how challenging the environment.\u003c\/p\u003e\n\u003cp\u003eThis floor stand solution has an elegant and exclusive design with a black, non-reflective surface specifically made to handle the, from time to time, rough life in TV-studios, OB-vans and onstage in theaters and concert halls. The Floor Base has an integrated shock mounting solution. The thread screw holds the Stand Extension and MMP-F Modular Active Boom. This unique design allows for a long stage microphone boom pole that does not swing, but rapidly stabilizes itself after being positioned.\u003c\/p\u003e\n\u003cp\u003eThese floor stand solutions can quickly, and with no tools needed, transform into a new configuration. You can combine it with another pencil mic capsule and preamplifier.\u003c\/p\u003e\n\u003cdiv id=\"panel-included\" class=\"tabs-panel is-active\" role=\"tabpanel\" aria-labelledby=\"panel-included-label\"\u003e\n\u003cdiv class=\"nx-product-description\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirectional Pattern: Supercardioid\u003c\/li\u003e\n\u003cli\u003ePrinciple of operation: Pressure gradient\u003c\/li\u003e\n\u003cli\u003eCartridge type: Pre-polarized condenser\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eDynamic range: Typ. 110 dB\u003c\/li\u003e\n\u003cli\u003eEffective frequency range ±2 dB, at 20 cm (7.9 in)\n\u003cul\u003e\n\u003cli\u003eMicroDot: 80 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz\u003c\/li\u003e\n\u003cli\u003eXLR-3M: 100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSensitivity, nominal, ±3 dB at 1 kHz: 16 mV\/Pa; -36 dB re. 1 V\/Pa\u003c\/li\u003e\n\u003cli\u003eEquivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))\u003c\/li\u003e\n\u003cli\u003eEquivalent noise level, ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)\u003c\/li\u003e\n\u003cli\u003eDistortion, THD \u0026lt; 1%: 130 dB SPL RMS, 133 dB SPL peak\u003c\/li\u003e\n\u003cli\u003eMax. SPL, THD 10%: 135 dB SPL peak\u003c\/li\u003e\n\u003cli\u003eMinimum load impedance: 2 kΩ\u003c\/li\u003e\n\u003cli\u003eRated output impedance: From MicroDot: 30 - 40 Ω. From XLR connector or DAD6001-BC XLR Adapter: 100 Ω\u003c\/li\u003e\n\u003cli\u003eCable drive capability\n\u003cul\u003e\n\u003cli\u003eMicroDot: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter\u003c\/li\u003e\n\u003cli\u003eXLR-3M: Up to 100 m (328 ft)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput balance principle: Signal balanced with XLR connector or DAD6001-BC XLR Adapter\u003c\/li\u003e\n\u003cli\u003eCommon mode rejection ratio (CMRR): \u0026gt; 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter\u003c\/li\u003e\n\u003cli\u003ePower supply (for full performance)\n\u003cul\u003e\n\u003cli\u003eMicroDot: Min. 5 V to max. 10 V through DPA adapter for wireless systems or\u003c\/li\u003e\n\u003cli\u003eP48 (Phantom Power) with DAD6001-BC XLR adapter\u003c\/li\u003e\n\u003cli\u003eXLR-3M: P48 (Phantom Power)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCurrent consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter\u003c\/li\u003e\n\u003cli\u003ePolarity: +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001-BC XLR adapter)\u003c\/li\u003e\n\u003cli\u003eMicrophone diameter: 5.7 mm (0.22 in)\u003c\/li\u003e\n\u003cli\u003eMicrophone length:\n\u003cul\u003e\n\u003cli\u003eMicrodot: 16 cm (6 in), 28 cm (11 in), 43 cm (17 in), 77 cm (30 in), 122 cm (48 in)\u003c\/li\u003e\n\u003cli\u003eXLR-3M: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTemperature range: -40°C to 45°C (-40°F to 113°F)\u003c\/li\u003e\n\u003cli\u003eRelative humidity (RH): Up to 90%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DPA","offers":[{"title":"Default Title","offer_id":43888448602155,"sku":"DPA-4098-DC-F-B01-120","price":1147.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/DPA-4098-DC-F-B01-120__39111.1701772426.1280.1280.jpg?v=1775676514","url":"https:\/\/www.empirepro.com\/products\/dpa-4098-dc-f-b01-120","provider":"Empire Pro","version":"1.0","type":"link"}