{"product_id":"dpa-st4011a","title":"DPA ST4011A","description":"\u003ch3\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDPA's 4011A cardioids are exceptionally linear in their frequency response – also off axis, giving you the natural experience. They handle extremely high SPL and will therefore allow for close placement and are often used for piano recordings with a placement closer to the hammers or as overheads for drums.\u003cbr\u003eThe DPA ST4011A is a complete DPA 4011A Stereo Pair with two carefully factory-matched first order cardioid microphones. Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer.\u003cbr\u003eThe specially selected DPA 4011A microphones are matched within ±1 dB on both frequency response and sensitivity.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorld-wide cardioid reference mic\u003c\/li\u003e\n\u003cli\u003eHandles very high sound pressure levels\u003c\/li\u003e\n\u003cli\u003eCarefully matched within ±1 dB\u003c\/li\u003e\n\u003cli\u003ePeli™Case transportation and protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirectional pattern: Cardioid\u003c\/li\u003e\n\u003cli\u003ePrinciple of operation: Pressure gradient\u003c\/li\u003e\n\u003cli\u003eCartridge type: Pre-polarized condenser\u003c\/li\u003e\n\u003cli\u003eFrequency range: 20 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency range, ± 2 dB, at 30 cm: 40 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity, nominal, ± 2 dB at 1 kHz: 10 mV\/Pa; -40 dB re. 1 V\/Pa\u003c\/li\u003e\n\u003cli\u003eEquivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max.20 dB(A))\u003c\/li\u003e\n\u003cli\u003eEquivalent noise level, ITU-R BS.468-4: Typ. 25 dB (correct with theattenuator in 0 dB or -20 dB setting)\u003c\/li\u003e\n\u003cli\u003eS\/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 76 dB(A)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion (THD): \u0026lt; 1 % up to 139 dB SPL peak\u003c\/li\u003e\n\u003cli\u003eDynamic range: Typ. 121 dB\u003c\/li\u003e\n\u003cli\u003eMax. SPL, peak before clipping: 159 dB\u003c\/li\u003e\n\u003cli\u003eSwitchable attenuator 0 dB \/ -20 dB\u003c\/li\u003e\n\u003cli\u003eOutput impedance: \u0026lt; 200 ohm\u003c\/li\u003e\n\u003cli\u003eMinimum load impedance: 2 kohm\u003c\/li\u003e\n\u003cli\u003eCable drive capability: 100 m (328 ft)\u003c\/li\u003e\n\u003cli\u003eOutput balance principle: Impedance balancing with Active Drive\u003c\/li\u003e\n\u003cli\u003eCommon Mode Rejection Ratio (CMRR): \u0026gt; 60 dB\u003c\/li\u003e\n\u003cli\u003ePower supply (for full specifications): 48 V Phantom power (± 4 V)\u003c\/li\u003e\n\u003cli\u003eCurrent consumption: 2.8 mA\u003c\/li\u003e\n\u003cli\u003eConnector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: -phase\u003c\/li\u003e\n\u003cli\u003eColor: Matte black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DPA","offers":[{"title":"Default Title","offer_id":43888504963115,"sku":"DPA-ST4011A","price":4020.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/dpa_microphones_st4011a_matched_stereo_pair_1353667543_901530__65050.1682441433.1280.1280.jpg?v=1775676644","url":"https:\/\/www.empirepro.com\/products\/dpa-st4011a","provider":"Empire Pro","version":"1.0","type":"link"}