{"product_id":"ferrofish-verto-64","title":"Ferrofish VERTO 32","description":"\u003cp\u003e\u003cstrong\u003eOverveiw\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDante is the de facto standard for networking audio equipment. With the Verto 32 it’s now possible to easily integrate up to 32 x 32 channels via ADAT into a Dante network. No matter which ADAT device you use – the Verto 32 makes all channels immediately avalilable in the network: “plug and play”.\u003c\/p\u003e\n\u003cp\u003eThe ultra compact device has 8 ADAT connectors: 4 for transmitting, and 4 for receiving digital data (8 channels each).\u003c\/p\u003e\n\u003cp\u003eOn the Dante side there are two RJ45 sockets, also prepared for redundant operation. The Verto 32 supports up to 96kHz sample rate, MIDI jacks for control, and BNC wordclock jacks for external synchronization.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWant your beloved equipment to survive? Add Verto. Done. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDante Plug \u0026amp; Play\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntegrate the Verto 32 seamlessly into your Dante network. Just plug it in and the device is visible on the network and ready to be routed freely using the Dante Controller software. Together with the Dante Virtual Soundcard, also from Audinate, the Verto 32 turns into a high channel ADAT audio interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe VERTO 32 is equipped with a MIDI port and two BNC wordclock connectors. This way an external Wordclock can be fed to the Dante network, or the Dante wordclock can be used for external devices.\u003c\/p\u003e\n\u003ch4\u003eVERTO 32 INPUTS \u0026amp; OUTPUTS\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e4 x ADAT I\/O (TOSLINK)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach ADAT port can transfer eight channels at a sample rate of 48 kHz (= 32 In + 32 Out channels). With 96 kHz it is possible to convert 16 Dante I\/O to ADAT (S\/MUX2).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIDI I\/O\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMADI and Dante data streams can be used to send and receive embedded MIDI messages. A very useful feature, to remotely control MIDI equipment in the studio rack or on stage from the FOH.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWord Clock I\/O\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBNC with 75 Ohm termination. Set to on by default – can be changed with the remote software via the network connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDante Network I\/O (redundant)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo RJ-45 ports connect to any Dante audio network. Simply connect a LAN Ethernet cable (CAT5\/CAT6) to the primary port. The secondary port takes automatically over in case of a network error (Dante Port Redundancy).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADAT I\/O\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVERTO 32: 4x ADAT Input + 4x ADAT Output, optical TOSLINK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChannel count:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32×32 channels at 48kHz,\u003c\/li\u003e\n\u003cli\u003e16×16 channels at 96kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVERTO 64: 8x ADAT Input + 8x ADAT Output, optical TOSLINK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChannel count:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32×32 channels at 48kHz\u003c\/li\u003e\n\u003cli\u003e16×16 channels at 96kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMIDI I\/O\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x DIN5 connector for MIDI embedding\/de-embedding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWordclock I\/O\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBNC: 1 x input, 1 x output\u003c\/li\u003e\n\u003cli\u003e75 Ohm Termination set by default (switchable via Dante)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower Supply\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e14.4VA (1.2A at 12V)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolyfuse internal, self-resetting\u003c\/li\u003e\n\u003cli\u003e1 x power supply included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOperation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature range: 41°F up to 113°F (+5°C up to +45°C)\u003c\/li\u003e\n\u003cli\u003eHumidity: \u0026lt;75%, non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\/Size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 0,9 kg\u003c\/li\u003e\n\u003cli\u003eDimensions: 22 x 9 x 4,5 mm (without rack ears)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOptional accessories\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e19“ Rack mountain kit, metal (for mounting 1 x Verto in a 19” rack-space)\u003c\/li\u003e\n\u003cli\u003eMulti-range Power Supply 12V (EU)\u003c\/li\u003e\n\u003cli\u003eADAT Cable Locking Plate (Part. No. 7027)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ferrofish","offers":[{"title":"Default Title","offer_id":43892504592427,"sku":"FER-Verto 32","price":1104.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/verto-32-fl-front__58306.1726211704.1280.1280.png?v=1775678400","url":"https:\/\/www.empirepro.com\/products\/ferrofish-verto-64","provider":"Empire Pro","version":"1.0","type":"link"}