{"product_id":"ferrofish-verto-mx","title":"Ferrofish VERTO 64","description":"\u003cp\u003e\u003cstrong\u003eOverveiw\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e64 x 64 ADAT channels to Dante: Makeable.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDante is the de facto standard for networking audio equipment. With the \u003cstrong\u003eVerto 64\u003c\/strong\u003e it’s now possible to easily integrate up to 64 x 64 channels via ADAT into a Dante network. No matter which ADAT device you use – the Verto 64 makes all channels immediately avalilable in the network: “plug and play”.\u003c\/p\u003e\n\u003cp\u003eThe ultra compact device has 16 ADAT connectors: 8 for transmitting, and 8 for receiving digital data (8 channels each).\u003c\/p\u003e\n\u003cp\u003eOn the Dante side there are two RJ45 sockets, also prepared for redundant operation. The Verto 64 supports up to 96kHz sample rate, MIDI jacks for firmware update and BNC wordclock jacks for external synchronization.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour ADAT equipment deserves to be Dante Verto‘d. All of it. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDante Plug \u0026amp; Play \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntegrate the Verto 64 seamlessly into your Dante network. Just plug it in and the device is visible on the network and ready to be routed freely using the Dante Controller software. Together with the Dante Virtual Soundcard, also from Audinate, the Verto 64 turns into a high channel count ADAT audio interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional features \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe VERTO 64 is equipped with a MIDI port for update devices and two BNC wordclock connectors. This way an external Wordclock can be fed to the Dante network, or the Dante wordclock can be used for external devices.\u003c\/p\u003e\n\u003ch4\u003eVERTO 64 INPUTS \u0026amp; OUTPUTS\u003c\/h4\u003e\n\u003ch5\u003e8 x ADAT I\/O (TOSLINK)\u003c\/h5\u003e\n\u003cp\u003eEach ADAT port can transfer eight channels at a sample rate of 48 kHz (= 64 In + 64 Out channels). With 96 kHz it is possible to convert 32 Dante I\/O to ADAT (S\/MUX2).\u003c\/p\u003e\n\u003ch5\u003eMIDI I\/O\u003c\/h5\u003e\n\u003cp\u003eA MIDI I\/O Interface in 5Pin DIN configuration is also included to update the unit using a simple USB-MIDI Interface.\u003c\/p\u003e\n\u003ch5\u003eWord Clock I\/O\u003c\/h5\u003e\n\u003cp\u003eBNC with 75 Ohm termination. Set to on by default – can be changed with the remote software via the network connection.\u003c\/p\u003e\n\u003ch5\u003eDante Network I\/O (redundant)\u003c\/h5\u003e\n\u003cp\u003eTwo RJ-45 ports connect to any Dante audio network. Simply connect a LAN Ethernet cable (CAT5\/CAT6) to the primary port. The secondary port takes automatically over in case of a network error (Dante Port Redundancy).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e64 channel I\/O (Dante Brooklyn II board built-in)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADAT I\/O\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVERTO 32: 4x ADAT Input + 4x ADAT Output, optical TOSLINK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChannel count:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32×32 channels at 48kHz,\u003c\/li\u003e\n\u003cli\u003e16×16 channels at 96kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVERTO 64: 8x ADAT Input + 8x ADAT Output, optical TOSLINK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChannel count:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e64×64 channels at 48kHz\u003c\/li\u003e\n\u003cli\u003e16×16 channels at 96kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMIDI I\/O\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x DIN5 connector for MIDI connection and firmware updates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWordclock I\/O\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBNC: 1 x input, 1 x output\u003c\/li\u003e\n\u003cli\u003e75 Ohm Termination set by default (switchable via Dante)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower Supply\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e14.4VA (1.2A at 12V)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolyfuse internal, self-resetting\u003c\/li\u003e\n\u003cli\u003e1 x power supply included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOperation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature range: 41°F up to 113°F (+5°C up to +45°C)\u003c\/li\u003e\n\u003cli\u003eHumidity: \u0026lt;75%, non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\/Size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 0,9 kg\u003c\/li\u003e\n\u003cli\u003eDimensions: 22 x 9 x 4,5 mm (without rack ears)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOptional accessories\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e19“ Rack mountain kit, metal (for mounting 1 x Verto in a 19” rack-space)\u003c\/li\u003e\n\u003cli\u003eMulti-range Power Supply 12V (EU)\u003c\/li\u003e\n\u003cli\u003eADAT Cable Locking Plate (Part. No. 7027)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ferrofish","offers":[{"title":"Default Title","offer_id":43892504625195,"sku":"FER-Verto 64","price":1322.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/verto-64-fl-front__34653.1726212050.1280.1280.png?v=1775678401","url":"https:\/\/www.empirepro.com\/products\/ferrofish-verto-mx","provider":"Empire Pro","version":"1.0","type":"link"}