{"product_id":"focusrite-ams-rednet-d16r-mkii","title":"Focusrite AMS-REDNET-D16R-MKII","description":"\u003cp\u003e\u003cstrong\u003eOverveiw\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRedNet D16R MkII is a 16-channel bi-directional digital interface for Dante networks. The 1U rackmount device features individual input and output channel level controls, allowing for precise calibration and control of all input and output levels using RedNet Control. RedNet D16R MK2 features power supply and Ethernet redundancy with auto switchover in case of failure.\u003c\/p\u003e\n\u003cp\u003eVarious connection options make RedNet D16R MK2 a flexible addition to any Audio-over-IP system. A pair of DB25 multipin connectors each connect eight channels of AES3 I\/O into and out of the interface, while XLR and RCA ports enable two-channel AES3 and S\/PDIF connections, respectively, to be made. Sample rate conversion on every input enables external equipment to operate at different sample rates, and DARS signals are accepted on the XLR connector. Word Clock I\/O on BNC connectors allows synchronisation to house clock, or syncing external equipment to the Dante network.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e16-channel bi-directional digital interface for Dante networks.\u003c\/li\u003e\n\u003cli\u003eIndividual input and output channel level control using RedNet Control software.\u003c\/li\u003e\n\u003cli\u003eDual PSUs with locking IEC inlets.\u003c\/li\u003e\n\u003cli\u003eDual locking etherCON connectors for Primary and Secondary network connections.\u003c\/li\u003e\n\u003cli\u003ePower supply and ethernet redundancy with auto switchover in case of failure.\u003c\/li\u003e\n\u003cli\u003eFront-panel LED indicators for PSU, network, sample rate, signal present and clock source status.\u003c\/li\u003e\n\u003cli\u003eSample rate conversion on all input channels.\u003c\/li\u003e\n\u003cli\u003eTwo DB25 connectors with AES59 standard configuration; each carries eight channels of AES3 I\/O.\u003c\/li\u003e\n\u003cli\u003eRCA connectors for two-channel S\/PDIF input and output.\u003c\/li\u003e\n\u003cli\u003eXLR connections for alternate AES3 I\/O and DARS input.\u003c\/li\u003e\n\u003cli\u003eBNC connectors for Word Clock input and output.\u003c\/li\u003e\n\u003cli\u003eCompact 1U chassis allows maximum functionality in minimum rack space.\u003c\/li\u003e\n\u003cli\u003eFull operability with Focusrite RedNet and Red interfaces, plus all Dante devices from hundreds of manufacturers.\u003c\/li\u003e\n\u003cli\u003eRemote routing and control using RedNet Control and Dante Controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e16x16 AES3 I\/O with independent level control\u003c\/h2\u003e\n\u003cp\u003eThe RedNet D16R MkII is a 16-channel bi-directional AES3 interface for Dante® networks. The 1U rackmount device features individual input and output channel level controls, allowing for precise calibration and control of all input and output levels using RedNet Control. RedNet D16R MkII features power supply and Ethernet redundancy with auto switchover in case of failure.\u003c\/p\u003e\n\u003cp\u003eVarious connection options make RedNet D16R MkII a flexible addition to any Audio-over-IP system. A pair of DB25 multipin connectors each connect eight channels of AES3 I\/O into and out of the interface, while XLR and RCA ports enable two-channel AES3 and S\/PDIF connections, respectively, to be made.\u003c\/p\u003e\n\u003cp\u003eSample rate conversion on every input enables external equipment to operate at different sample rates, and DARS signals are accepted on the XLR connector. Word Clock I\/O on BNC connectors allows synchronisation to house clock, or syncing external equipment to the Dante network.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput \/ output trim\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Trim-78 to 0dB in 1dB steps (per channel)\u003c\/li\u003e\n\u003cli\u003eOutput Trim-78 to 0dB in 1dB steps (per channel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInput sample rate converters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSample Rate Range32Hz to 214kHz\u003c\/li\u003e\n\u003cli\u003eGain Error-0.3dB\u003c\/li\u003e\n\u003cli\u003eDynamic RangeGreater than 138dB (-60 dBFS method)\u003c\/li\u003e\n\u003cli\u003eTHD + NLess than -130dB (0.00003%); 0 dBFS input\u003c\/li\u003e\n\u003cli\u003eLatency11 to 45 samples (network and input sample rate dependent)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDigital performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupported Sample Rates44.1 \/ 48 \/ 88.2 \/ 96 \/ 176.4 \/ 192 kHz (-4% \/ -0.1% \/ +0.1% \/ +4.167%) at 24 bit\u003c\/li\u003e\n\u003cli\u003eClock SourcesInternal, Word Clock, DARS, AES input 1-2, AES input 9-10 or from Dante Network Master\u003c\/li\u003e\n\u003cli\u003eExternal Word Clock RangeNominal sample rate ±7.5%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAES \/ EBU\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChannel Count2 x 2 S\/PDIF Channels (reduces AES\/EBU input channels)\u003c\/li\u003e\n\u003cli\u003eInput And Output2 x DB25 connectors (AES59 Combined I\/O \/ Tascam Digital)\u003c\/li\u003e\n\u003cli\u003eAlternate Input (Optional DARS)1 x Female XLR (replaces DB25 channels 1-2)\u003c\/li\u003e\n\u003cli\u003eAlternate Output1 x Male XLR (duplicates DB25 channels 1-2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eS\/PDIF\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChannel Count2 x 2 S\/PDIF Channels (reduces AES\/EBU input channels)\u003c\/li\u003e\n\u003cli\u003eInput1 x RCA phono socket (replaces DB25 channels 3-4)\u003c\/li\u003e\n\u003cli\u003eOutput1 x RCA phono socket (switchable, duplicates any DB25 channel pair)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWord clock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput1 x BNC 75Ω port (switchable termination)\u003c\/li\u003e\n\u003cli\u003eOutput1 x BNC 75Ω port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePSU \u0026amp; network connections\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePSU2 x Internal, 100-240V, 50\/60Hz, consumption 30VA\u003c\/li\u003e\n\u003cli\u003eNetwork2 x EtherCON NE8FBH-S, also compatible with standard RJ45 connectors (Accomodates rugged EtherCON NE8MC*. Does not intermate with Cat 6 cable connector NE8MC6-MO and NKE65* cable)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Focusrite","offers":[{"title":"Default Title","offer_id":43892505641003,"sku":"FOC-AMS-REDNET-D16R-MKII","price":2470.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/D16R_MKIII-Front-2400_x_2400__55343.1677773094__97975.1726221959.1280.1280.png?v=1775678409","url":"https:\/\/www.empirepro.com\/products\/focusrite-ams-rednet-d16r-mkii","provider":"Empire Pro","version":"1.0","type":"link"}