{"product_id":"jbl-cbt-1000e","title":"JBL CBT 1000E","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\r\n\u003cp\u003eWhen connected to a CBT1000 line array column speaker, the CBT1000E Extension provides extended bass response, extended pattern control, and increased sound output levels. The combined array system provides Constant Beamwidth Technology™, which represents a breakthrough in pattern control consistency, utilizing complex analog beamforming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of passive column speakers.\u003c\/p\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e Components: Six (6) 165 mm (6.5 in) high-excursion LF drivers (CBT1000E)\u003c\/li\u003e\r\n\u003cli\u003e1500 Watt power handling (CBT1000E)\u003c\/li\u003e\r\n\u003cli\u003eBuilt-in purpose-designed crossover network, for combining with CBT1000 (CBT1000E)\u003c\/li\u003e\r\n\u003cli\u003eCoupler plate included (CBT1000E)\u003c\/li\u003e\r\n\u003cli\u003eExtended pattern control\u003c\/li\u003e\r\n\u003cli\u003eComponents: Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and Twelve (12) 165 mm (6.5 in) high-excursion LF drivers (CBT1000+1000E)\u003c\/li\u003e\r\n\u003cli\u003e3000 watt power handling (CBT1000+1000E)\u003c\/li\u003e\r\n\u003cli\u003ePatent-pending Constant Beamwidth Technology ™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.\u003c\/li\u003e\r\n\u003cli\u003eVertical pattern coverage is individually adjustable through a range of four (4) “Pattern Up” angles and four (4) “Pattern Down” coverage angles for a total of sixteen (16) different coverage combinations, all without the use of external DSP processing (CBT1000)\u003c\/li\u003e\r\n\u003cli\u003ePatent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw, narrower for long-throw) delivering superior coverage in both the front and rear corners of a room (CBT1000)\u003c\/li\u003e\r\n\u003cli\u003eSingle-speaker system room coverage at high SPL, with little over-splash and strong bass response down to below 38 Hz (CBT1000+1000E)\u003c\/li\u003e\r\n\u003cli\u003eSwitchable voicing provides flat response in music mode or mid-range presence peak in speech mode (CBT1000)\u003c\/li\u003e\r\n\u003cli\u003eSwivel (pan)\/tilt wall bracket and coupler plate included.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003ctable class=\"table1\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003e1COMPONENTS\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003eTwenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and Twelve (12) 165 mm (6.5 in) high-excursion LF drivers (CBT1000+1000E)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eFREQUENCY RANGE (-10 DB)\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e38 Hz - 20 kHz\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003eVertical (selectable via switch)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eSensitivity (2.83V@ 1m)\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e102 dB (at highest sensitivity setting: “Point” pattern up, “Point” pattern down, “Speech” voicing, in free space)\u003cbr\u003e95 dB (at lowest sensitivity setting: “Medium” pattern up, “Downfill” pattern down, “Music” voicing in free space)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eNominal Impedance\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e4 ohms\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003ePower Capacity\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e3000 W (12000 W peak), 2 hrs\u003cbr\u003e2000 W (8000 W peak), 100 hrs\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eMax SPL\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003eHighest directivity setting: (“Point” pattern up, “Point” pattern down) with “Speech” voicing:\u003cbr\u003e      131 dB continuous average pink noise \u003cbr\u003e      134 dB continuous program \u003cbr\u003e      137 dB Peak \u003cbr\u003e Highest directivity setting: (“Point” pattern up, “Point” pattern down) with “Music” voicing:\u003cbr\u003e      127 dB continuous average pink noise \u003cbr\u003e      130 dB continuous program \u003cbr\u003e      133 dB peak \u003cbr\u003e Lowest directivity setting: (“Medium” pattern up, “Downfill” pattern down) with “Speech” voicing:\u003cbr\u003e      128 dB continuous average pink noise \u003cbr\u003e      131 dB continuous program \u003cbr\u003e      134 dB peak \u003cbr\u003e Lowest directivity setting: (“Medium” pattern up, “Downfill” pattern down) with “Music” voicing:\u003cbr\u003e      124\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eVertical Coverage Settings\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003eCoverage is effective (frequency response similar) beyond the traditional -6 dB coverage angles. This is especially useful in compensating for differences in listening distances. Figures show both the -6 dB and -12 dB coverage angles (at 3 kHz). Angles are in reference to cabinet aiming axis.\u003cbr\u003e      Pattern UP Settings: \u003cbr\u003e           “Point”: -6dB @ +7°, -12 dB @ +12°\u003cbr\u003e           “Tight”: -6dB @ +9°, -12 dB @ +15°\u003cbr\u003e           “Narrow”: -6dB @ +10°, -12 dB @ +20°\u003cbr\u003e           “Medium”: -6dB @ +13°, -12 dB @ +24°\u003cbr\u003e \u003cbr\u003e      Pattern DOWN Settings:\u003cbr\u003e           “Point”: -6dB @ -7°, -12 dB @ -12°\u003cbr\u003e          \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003ePatent-pending Tapered Horizontal Waveguide continuously variable.\u003cbr\u003e      Long-throw (top) section: 100°\u003cbr\u003e      Middle section: 130°\u003cbr\u003e      Short-throw (bottom) section: 160°\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eTransducers\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eLow Frequency Drivers\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e12 pcs, 165 mm (6.5 in) drivers, neodymium, 50 mm (2 in) voice coil, damped blended textile surround, coated diaphragm for moisture, UV, and salt resistance.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eHigh Frequency Drivers\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e24 pcs, 25 mm (1 in) drivers, neodymium, encased magnet and coated diaphragm for moisture, UV, and salt resistance.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003eFiberglass reinforced ABS cabinet, powder coated 1050 aluminum grille\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eOutdoor Capability\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003eIP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. Exceeds Mil Spec 810 for humidity, temperature \u0026amp; UV, ASTM G85 for acid-air\/salt-spray (200 hrs).\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eColors\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003eBlack (RAL9004) or White (-WH) (RAL9016)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eInsert Points\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003eCoupler plate utilizes the bottom two rows of the top speaker and the top two rows of the bottom speaker, leaving available: 20 individual M8 inserts on back panel (20 mm deep) for use with swivel (pan)\/tilt bracket(s), plus 4 individual M8 inserts on top and 4 on bottom of cabinet end-caps.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003eIncluded two-part swivel (pan)\/tilt wall bracket provides continuously variable +\/- 45 degree left-right swivel aiming (at no up\/down tilt – see Bracket Guide for maximum swivel range at various up\/down tilt angles), continuously variable +\/- 5.25 degree tilt, in the following increments: 5.25°, 5.0°, 4.5°, 4°, 3.75°, 3.5°, 3.0°, 2.75°, 2.5°, 2.0°, 1.75°, and 1.25°. Twenty (20) available threaded mounting points located on back panel of cabinet conform to industry standard rectangular 127 x 70 mm (5.0 x 2.75 in) pattern for legacy OmniMount® and other compatible third–party brackets. Four (4) threaded mount points on the top end-cap and four (4) on the bottom end-cap. Threaded mounting points can be utilized for suspension. (Always use multiple mounting points.)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eDimensions (H x W x D)\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e2040 mm x 250 mm x 345 mm (80.4 x 9.9 x 13.6 in)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e(cabinet): 47.2 kg (104 lbs)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eIncluded Accessories\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003eTwo-piece swivel (pan)\/tilt wall bracket Coupler Plate\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eOptional Accessories\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003eMTC-PC2 terminal panel cover MTC-CBT1K-ACC1 Accessory kit includes: 2 pcs MTC-CBT-FM3 flush-mount brackets 1 pc MTC-CBT-OS3 offset bracket (for CBT 1000+1000E array – works in conjunction with CBT 1000E’s included Coupler Plate for locating CBT 1000E extension cabinet above CBT 1000 instead of below it) MTC-CBT-SUS3 CBT Series suspension bracket kit (2 pcs included to provide top and bottom attachment points)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":43892920451115,"sku":"JBL-CBT 1000E","price":1400.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/JBL-CBT_1000E-1__13442.1699470308.1280.1280.jpg?v=1775679457","url":"https:\/\/www.empirepro.com\/products\/jbl-cbt-1000e","provider":"Empire Pro","version":"1.0","type":"link"}