{"product_id":"lea-cs1504d-g","title":"LEA CS1504D-G","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing the CONNECTSERIES 1504D-G high-power IoT-enabled smart amp. This four-channel model drives 1,500 watts per channel (into 2, 4, and 8 ohms as well as 70Vrms and 100Vrms). Available in both Network and Dante, it’s important to note that the CONNECTSERIES 1504D-G is designed exclusively for wired LAN connections and does not support Wi-Fi connectivity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAudio\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutput Power 4 x 1500 WRMS Per Channel @ 2Ω, 4Ω, 8Ω, 70V, 100V | 750 Watts @ 25V\u003c\/li\u003e\n\u003cli\u003eInputs 4 Analog: Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity Dante: 8 x 8 Dante at 96kHz or 48kHz, Multicast or Unicast AES 67: Configurable via the Dante Controller Software\u003c\/li\u003e\n\u003cli\u003eTHD+N 0.1% (20Hz to 20kHz)\u003c\/li\u003e\n\u003cli\u003eFrequency Response +\/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Level 105dB (20Hz to 20kHz referenced to 8Ω)\u003c\/li\u003e\n\u003cli\u003eCrosstalk 70dB (20Hz to 20kHz)\u003c\/li\u003e\n\u003cli\u003eI\/O Latency 3.2ms DSP latency with no FIR Coefficients loaded\u003c\/li\u003e\n\u003cli\u003eLoad Impedance LowZ down to 2 ohms, 70V direct, and 100V Direct per channel\u003c\/li\u003e\n\u003cli\u003eOutput Classification Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality on 2 channels without sacrificing an amplifier channel\u003c\/li\u003e\n\u003cli\u003eDC Offset +\/- 3mV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDSP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDSP Architecture Analog Devices Sharc 96kHz DSP Processor with 32-bit Core with Sample Rate Converters\u003c\/li\u003e\n\u003cli\u003eInput Matrix Routable matrix; any input to any output with primary and secondary input priority\u003c\/li\u003e\n\u003cli\u003eCrossovers Up to 48 dB\/Octave IIR Filters (Linkwitz Riley and Butterworth and Bessel). FIR filters (24db\/oct \u0026amp; 48db\/oct Linkwitz Riley, Linear Phase Brickwell, and ability to load FIR Coefficients – 2048 taps per channel @96 KHZ)\u003c\/li\u003e\n\u003cli\u003eParametric EQ 8 Band Parametric EQ per channel\u003c\/li\u003e\n\u003cli\u003eOutput Delay 4 Seconds per channel\u003c\/li\u003e\n\u003cli\u003eOutput Protection DC, VHF, and AC Mains Protection, Over-temp and Current Limiter, fan fault detection\u003c\/li\u003e\n\u003cli\u003eLimiting Peak Voltage and RMS Voltage\u003c\/li\u003e\n\u003cli\u003eLoad Monitoring Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCONTROL, MONITORING, NETWORK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNetwork Connectivity Wi-Fi or 100MB Ethernet with PoE or Built in Wi-Fi Access Point (IEEE 802.11 b\/g\/n WPA, WPA2, WEP)\u003c\/li\u003e\n\u003cli\u003eUser Interface Web Browser User Interface, 3rd Party API Control, LEA Cloud or SharkWare\u003c\/li\u003e\n\u003cli\u003eOperating Systems Web UI - (MAC, IOS, PC, Android, Linux), SharkWare – MAC \u0026amp; PC\u003c\/li\u003e\n\u003cli\u003eEvent Reporting User Downloadable and Viewable Event and Fault log - POE allows for enhanced error monitoring\u003c\/li\u003e\n\u003cli\u003eExternal I\/O External I\/O In: Toggles Remote On\/Off | External I\/O Out: Indicates Amplifier Health\u003c\/li\u003e\n\u003cli\u003eCloud IoT AWS Cloud based IoT functionality via LEA Professional Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOPS DATA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAC Mains 100VAC - 240VAC +\/- 15% 50Hz or 60Hz\u003c\/li\u003e\n\u003cli\u003eTemperature Storage: -20°C to 90° C - Operating: 0°C to 60° C\u003c\/li\u003e\n\u003cli\u003ePower Supply Universal Switch Mode Power Supply\u003c\/li\u003e\n\u003cli\u003eEN54-16 Output Power 1218 Watts @ 9.6Ω (40° C ambient temp for 1 minute) Smart Power Bridge: 1884 Watts @ 9.6Ω (40° C ambient temp for 1 minute)\u003c\/li\u003e\n\u003cli\u003eSafety Approvals UL, CSA,CE, ETL, FCC, CCC, KETI, NOM , ROHS, PSE, EN54-16\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (L x W x H) Product: 17.25” x 19” x 2U (438mm x 482mm x 2U) Shipping: 22” x 22.75” x 8” (578mm x 203mm x 559mm)\u003c\/li\u003e\n\u003cli\u003eWeight 28lbs \/ 12.7kg | Shipping: 30lbs \/ 13.6kg\u003c\/li\u003e\n\u003cli\u003eCooling Front to Rear Variable Fan Speed Cooling | Fan Noise at idle is 50dB @ 1m | Fan Noise at 50% is 57dB @1m Fan Noise at full speed is 63dB @1m\u003c\/li\u003e\n\u003cli\u003eConnectors Analog Input: 3 pin Amphenol Anytek, Output: 2 pin Amphenol Anytek, External IO: 8 pin Amphenol Anytek, power cord (32A Neutrik Powercon to L6-30p), Ethernet RJ45 In for Control, Primary and Secondary RJ45 in for Dante\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LEA","offers":[{"title":"Default Title","offer_id":43893301280811,"sku":"LEA-CS1504D-G","price":3515.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/1500-e1650305088719__82681.1761927411.1280.1280.png?v=1775701530","url":"https:\/\/www.empirepro.com\/products\/lea-cs1504d-g","provider":"Empire Pro","version":"1.0","type":"link"}