{"product_id":"lea-cs1504d","title":"LEA CS1504D","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the CONNECT 1504 \u0026amp; CONNECT 3004 high power IoT-enabled amplifiers. The range includes four new four-channel models available in configurations ranging from 1,500 to 3,000 watts (into 2, 4, and 8 ohms as well as 70Vrms and 100Vrms). These new additions to the CONNECTSERIES amplifiers are available in NETWORK CONNECT and DANTE CONNECT versions, including both Dante and AES 67 connectivity options. All models provide three different methods of network connection: using the amplifier’s built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection. Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.\u003c\/p\u003e\r\n\u003ch4\u003eFeatures\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWeb Browser-based UI – works on any device with no software to download\u003c\/li\u003e\r\n\u003cli\u003eDirect LoZ and HiZ (70V or 100V) selectable per channel\u003c\/li\u003e\r\n\u003cli\u003eProprietary Smart Power Bridge allows user to bridge a channel to achieve double the power of that channel without sacrificing an amplifier channel\u003c\/li\u003e\r\n\u003cli\u003e3 Ways to Connect 1.) Built in WiFi Access Point 2.) Connects to existing WiFi network 3.) Local Area Network Ethernet connection\u003c\/li\u003e\r\n\u003cli\u003e96kHz Analog Devices DSP with Input Routing, multiple 48dB\/Oct crossover filters, 8 Parametric EQ filters, user configurable speaker limiters, and real time load monitoring\u003c\/li\u003e\r\n\u003cli\u003eUniversal Switch Mode Power Supply with PFC. Operation from 100VAC – 240VAC +\/-15%\u003c\/li\u003e\r\n\u003cli\u003eAnalog fully routable inputs\u003c\/li\u003e\r\n\u003cli\u003eExternal I\/O Port for Remote On\/Off and fault monitoring\u003c\/li\u003e\r\n\u003cli\u003eHighly Efficient Class D Output Stage for low AC Current draw\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAnalog: Balanced analog Inputs with user selectable 26 dB and 34 dB input sensitivity\u003cbr\u003eDante: 8 x 8 Dante at 96kHz or 48kHz, Multicast or Unicast\u003cbr\u003eAES 67: Configurable via the Dante Controller Software\u003c\/li\u003e\r\n\u003cli\u003eTHD+N: 0.1% (20Hz to 20kHz)\u003c\/li\u003e\r\n\u003cli\u003eFrequency Response: 20Hz to 20kHz, +\/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω\u003c\/li\u003e\r\n\u003cli\u003eSignal to Noise Level: 105dB (20Hz to 20kHz referenced to 8Ω)\u003c\/li\u003e\r\n\u003cli\u003eCrosstalk: 70dB (20Hz to 20kHz)\u003c\/li\u003e\r\n\u003cli\u003eAmplifier Output Classification: Class D with Proprietary Smart Power Bridge Technology allowing for bridged output functionality without sacrificing an amplifier channel. This model has two Smart Power Bridge channels.\u003c\/li\u003e\r\n\u003cli\u003eDSP Architecture: Analog Devices Sharc 96kHz DSP Processor with 32-bit floating point support and built in sample rate converters\u003c\/li\u003e\r\n\u003cli\u003eInput Matrix: Routable matrix; any input to any output with primary and secondary input priority\u003c\/li\u003e\r\n\u003cli\u003eCrossovers: Advanced DSP with Linear Phase FIR Crossovers and up to 48dB\/Octave IIR Filters (Linkwitz Riley and Butterworth)\u003c\/li\u003e\r\n\u003cli\u003eParametric EQ: 16 Band Parametric EQ per channel\u003c\/li\u003e\r\n\u003cli\u003eOutput Delay: 4 seconds per channel\u003c\/li\u003e\r\n\u003cli\u003eOutput Protection: DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection\u003c\/li\u003e\r\n\u003cli\u003eUser Adjustable Limiting: Peak Voltage and RMS Voltage\u003c\/li\u003e\r\n\u003cli\u003eLoad Monitoring: Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources\u003c\/li\u003e\r\n\u003cli\u003eUser Interface: Web Browser User Interface, 3rd Party API control, or CLOUD control\u003c\/li\u003e\r\n\u003cli\u003eExternal I\/O: In: Toggles Remote On\/Off\u003c\/li\u003e\r\n\u003cli\u003eExternal I\/O: Out: Indicates Amplifier Health\u003c\/li\u003e\r\n\u003cli\u003eAC Mains: 100VAC - 240VAC +\/- 15% 50Hz or 60Hz\u003c\/li\u003e\r\n\u003cli\u003ePower Supply: Universal Switch Mode Power Supply with Power Factor Correction\u003c\/li\u003e\r\n\u003cli\u003eDimensions: Product: 17.88” x 19” x 2U (454mm x 482mm x 2U)\u003c\/li\u003e\r\n\u003cli\u003eWeight: Shipping Weight 30 lbs \/ 13.6 kg\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eCooling:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFront to Rear Variable Fan Speed Cooling\u003c\/li\u003e\r\n\u003cli\u003eFan Noise at idle is 50dB @ 1m\u003c\/li\u003e\r\n\u003cli\u003eFan Noise at 50% is 57dB @1m\u003c\/li\u003e\r\n\u003cli\u003eFan Noise at full speed is 63dB @ 1m\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"LEA","offers":[{"title":"Default Title","offer_id":43893301248043,"sku":"LEA-CS1504D","price":3255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/1500-e1650305088719__01748.1761927861.1280.1280.png?v=1775701530","url":"https:\/\/www.empirepro.com\/products\/lea-cs1504d","provider":"Empire Pro","version":"1.0","type":"link"}