{"product_id":"neumann-kh-150-aes67","title":"Neumann KH 150 AES67","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeumann Accuracy, Serious Bass and Power to Spare\u003c\/p\u003e\n\u003cp\u003eThe KH 150 is a powerful bi-amplified studio monitor with reference-class performance. Its 6.5” woofer in a bass reflex cabinet provides stunning low end and high SPL capability with undiminished clarity. DSP controlled electronics ensure linear phase response and allow for room-adaptive calibration via Neumann’s revolutionary MA 1 Automatic Monitor Alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat You Hear Is What You Get\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe KH 150 follows the same philosophy as all Neumann studio monitors: highest linearity, lowest distortion, no coloration, and perfect adaptability to any acoustic environment. It allows you to hear every nuance of your tracks. Mixing becomes so much faster and easier, once the guesswork is over. And more creative, too: Sounds genius, but can I get away with that? Is that vocal bright or sibilant? Is it too much bass? The KH 150 will tell you. Honestly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne Bigger\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhat differentiates the KH 150 from its smaller siblings is its deeper bass response down to 39 Hz. That’s almost as low as the larger KH 310, thanks to the KH 150’s novel 6.5” high-precision woofer in a carefully designed bass reflex cabinet. The KH 150 is thus ideally suited to urban music, EDM, film scoring, and all styles that require extended low end and\/or elevated listening levels. Thanks to powerful amplifiers (145 W\/100 W) and sophisticated protection limiters, no clarity is lost even at high SPLs. But, being a true universalist, the KH 150 works just as well for everything from rock to classical music, broadcast applications and voice-over work.\u003c\/p\u003e\n\u003cp\u003eThe KH 150 has an exceptionally linear frequency response from 39 Hz to 21 kHz (±3 dB). Not only that: It also linearizes the phase response! Which translates to clear mids with astonishing transparency as well as extreme accuracy in the time domain: precise impulse reproduction and finely resolved reverbs. This is made possible by DSP controlled electronics which allow for sophisticated crossovers avoiding the phase distortion caused by analog filters. The internal DSP also realizes new standards in tonal consistency. The KH 150 is made to extremely low tolerances of no more than ± 0.8 dB! And you can hear it, too: Stereo imaging is razor-sharp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady for Your Room\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEven the best loudspeaker only sounds as good as the acoustic environment allows. Neumann’s Mathematically Modelled Dispersion™ (MMD™) waveguide guarantees a wide sweet spot and minimizes desk reflections. But the KH 150 goes much further: Its internal DSP allows for room calibration via Neumann’s revolutionary Automatic Monitor Alignment. MA 1 (sold separately) makes sure your DSP powered monitors are optimally adapted to the character of your room and perfectly calibrated for your listening position. Even in acoustically treated rooms, this results in a huge improvement.\u003c\/p\u003e\n\u003cp\u003eTonal compatibility with other KH line studio monitors makes it possible to use the KH 150 in mixed setups e.g. in surround\/immersive setups. For flexible connectivity the KH 150 features both analog and digital inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAES67 – Audio over IP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdditionally, the KH 150 AES67 model variant offers integrated redundant AES67 audio network ports that are fully compliant with broadcast standards such as ST 2110, ST 2022-7 redundancy, and RAVENNA. At the same time, the KH 150 AES67 is compatible with DANTE®-generated AES67 network streams.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnergy Efficient\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeumann engineers took great care to develop a patent pending amplifier technology which combines superior audio performance with the energy efficiency of Class D. Although the KH 150’s amplifiers deliver up to 145 W to the 6.5” woofer and 100 W to the 1” tweeter, they only consume 17 W at idle. Auto-standby reduces power consumption to 0.3 W when the KH 150 has not been used for a while, but can be deactivated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost of the KH 120 accessories also fit the KH 150, with the exception of the LH 65 table stand, which is available in a slightly larger version in the form of the new LH 66 (Cat. No. 700258). The LH 61 (L bracket) was updated, because the KH 150 is a bit heavier\/larger than the KH 120 and the LH 64 (VESA mount) was adjusted to allow access to the controls of the KH 150. The order numbers here are unchanged..\u003c\/p\u003e\n\u003cp\u003eAll mounting options can be found in our updated Monitor Mounting Matrix. At a later date we will also update the Monitor Accessory Finder.\u003c\/p\u003e\n\u003cp\u003eThe KH 150 is available in two color options, anthracite and white.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-precision drivers, Mathematically Modelled Dispersion™ (MMD™) waveguide\u003c\/li\u003e\n\u003cli\u003eLinear frequency response 39 Hz … 21 kHz (±3 dB)\u003c\/li\u003e\n\u003cli\u003eLinear phase response 105 Hz … 16 kHz (± 45°) with latency \u0026lt; 2,6 ms\u003c\/li\u003e\n\u003cli\u003eDSP engine allows for room adaptive calibration via Neumann’s MA 1\u003c\/li\u003e\n\u003cli\u003eRazor-sharp imaging due to extremely low tolerances (± 0.8 dB)\u003c\/li\u003e\n\u003cli\u003eMay be combined with other KH line speakers in immersive\/surround setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree field frequency response ±6 dB: 36 Hz ... 21 kHz\u003c\/li\u003e\n\u003cli\u003eFree field frequency response ±3 dB: 39 Hz ... 20.4 kHz\u003c\/li\u003e\n\u003cli\u003eFree field frequency linearity deviation between 100 Hz and 10 kHz: ±0.8 dB\u003c\/li\u003e\n\u003cli\u003eSelf-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu): \u0026lt;20 dB(A) SPL\u003c\/li\u003e\n\u003cli\u003eSine wave output with a THD \u0026lt; 0.5 % at 1 m in half space: 95 dB SPL (\u0026gt;75 Hz)\u003c\/li\u003e\n\u003cli\u003eMax. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 118.7 dB SPL\u003c\/li\u003e\n\u003cli\u003eMax. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 112.7 dB SPL\u003c\/li\u003e\n\u003cli\u003eBass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz): 107.5 dB SPL\u003c\/li\u003e\n\u003cli\u003eMax. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions: 108 dB(C) SPL\u003c\/li\u003e\n\u003cli\u003eMax. short term SPL with music material at 2.3 m in typical listening conditions (pair \/ full range): 100 dB(C) SPL\u003c\/li\u003e\n\u003cli\u003eMax. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer): 106 dB(C) SPL\u003c\/li\u003e\n\u003cli\u003eMax. long term SPL with pink noise at 2.3 m, in typical listening conditions (single \/ pair full range): 88 \/ 94 dB(C) SPL\u003c\/li\u003e\n\u003cli\u003eDolby D.A.R.D.T. Max SPL fullrange: 114 dB\u003c\/li\u003e\n\u003cli\u003eDolby D.A.R.D.T. Max SPL bass managed: 120 dB\u003c\/li\u003e\n\u003cli\u003eRecommended Listening Distance: 1.0 … 2.5 m; (3'… 8')\u003c\/li\u003e\n\u003cli\u003eFeasible Listening Distance: 0.75 … 6.0 m; (2'6\"… 18')\u003c\/li\u003e\n\u003cli\u003eAcoustic principle: Bassreflex, Ports at the front\u003c\/li\u003e\n\u003cli\u003eAnalog input(s): XLR: analog electronically balanced\u003c\/li\u003e\n\u003cli\u003eAnalog input impedance: 24 kOhms\u003c\/li\u003e\n\u003cli\u003eAnalog input(s): XLR: analog electronically balanced\u003c\/li\u003e\n\u003cli\u003eAnalog input impedance: 24 kOhms\u003c\/li\u003e\n\u003cli\u003eMax. input level: +24 dBu for 94 dB SPL setting; +14 dBu for 100 dB SPL setting; +9 dBu for 108 dB SPL setting; -1 dBu for 114 dB SPL setting\u003c\/li\u003e\n\u003cli\u003eCommon mode rejection ratio (CMRR): \u0026gt;56 dB @ 15kHz\u003c\/li\u003e\n\u003cli\u003eVolume control: via MA 1 software\u003c\/li\u003e\n\u003cli\u003eVolume control range; resolution: 0 … -8 dB; 0.1 dB\u003c\/li\u003e\n\u003cli\u003eAnalog dynamic range; THD+N: 118 dB, A-weighted, 90 dB\u003c\/li\u003e\n\u003cli\u003eSignal routing modes: analog, S\/PDIF L, S\/PDIF R, S\/PDIF mono\u003c\/li\u003e\n\u003cli\u003eDigital input(s): RCA (75 O): S\/PDIF\u003c\/li\u003e\n\u003cli\u003eDigital output(s): RCA (75 O): S\/PDIF\u003c\/li\u003e\n\u003cli\u003eMax. Input Level; pk-pk, unbalanced \/ balanced: 1.2 V\u003c\/li\u003e\n\u003cli\u003eDigital converter: resolution; design: 24 Bit\u003c\/li\u003e\n\u003cli\u003eDigital converter: sampling rate: 32 kHz..200 kHz\u003c\/li\u003e\n\u003cli\u003eDigital internal sampling rate: 48 kHz\u003c\/li\u003e\n\u003cli\u003eOutput sample rate: identical to input sample rate\u003c\/li\u003e\n\u003cli\u003eLatency ADA \/ DA: Analog Input: 2.6 ms; SPDIF Input: 2.1 ms\u003c\/li\u003e\n\u003cli\u003eDelay: User adjustable delay range: 0 … 120 ms\u003c\/li\u003e\n\u003cli\u003eDelay: Resolution: time; distance: 20.8 µs\u003c\/li\u003e\n\u003cli\u003eDelay: Max. frames Audio-video synchronisation (lip sync): 0 … 120 ms for TOF=0ms, depends on APP implementation\u003c\/li\u003e\n\u003cli\u003eDelay: Time-of-flight maximum distance: 0 … 120 ms for lipsync=0ms, depends on APP implmentation\u003c\/li\u003e\n\u003cli\u003eInput gain control (sensitivity): 0 dB ... -15 dB\u003c\/li\u003e\n\u003cli\u003eOutput level control (output level in 1 m based on 0 dBu input level): 94; 100; 108; 114 dB SPL\u003c\/li\u003e\n\u003cli\u003eEqualization: Bass: 0; -2; -4; -6 dB\u003c\/li\u003e\n\u003cli\u003eEqualization: Low-Mid: 0; -2; -4; -6 dB\u003c\/li\u003e\n\u003cli\u003eEqualization: Treble: +1; 0; -1; -2 dB\u003c\/li\u003e\n\u003cli\u003eInput selector: Analog; S\/PDIF L; S\/PDIF R; Mono\u003c\/li\u003e\n\u003cli\u003eGround Lift: Yes\u003c\/li\u003e\n\u003cli\u003eControl: Local; Network\u003c\/li\u003e\n\u003cli\u003eMains Switch: Yes\u003c\/li\u003e\n\u003cli\u003eMains Voltage Select: Universal Power Supply 100 V~ … 240 V~\u003c\/li\u003e\n\u003cli\u003eController design: Digital; active\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 1700 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover slope: 24 dB \/ octave\u003c\/li\u003e\n\u003cli\u003eEqualization: via Neumann.Control software: No\u003c\/li\u003e\n\u003cli\u003eAutomatic room calibration via MA 1: Yes\u003c\/li\u003e\n\u003cli\u003eFIR phase correction: Linear phase (105 Hz ... 16 kHz; +\/- 45°)\u003c\/li\u003e\n\u003cli\u003eProtection circuitry: Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer excursion limiter; thermo limiter for the electronics and amplifiers\u003c\/li\u003e\n\u003cli\u003eInfrasonic filter: frequency; slope: 38 Hz; 12 dB \/ octave\u003c\/li\u003e\n\u003cli\u003eRemote control: MA 1 software via an RJ45 connector carrying standard IP data\u003c\/li\u003e\n\u003cli\u003eDisplay: On; Normal Operation: Neumann logo “White”\u003c\/li\u003e\n\u003cli\u003eDisplay: Identification: Neumann logo “Rosé”\u003c\/li\u003e\n\u003cli\u003eDisplay: Limit \/ Clip \/ Errors \/ Protection \/Boot Mute \/ Shut Down Mute: Neumann logo “Red”\u003c\/li\u003e\n\u003cli\u003eLogo Brightness: via MA 1 software\u003c\/li\u003e\n\u003cli\u003eOutput power woofer amplifier (THD+N with limiter deactivated: 10%): 145 W\u003c\/li\u003e\n\u003cli\u003eOutput power tweeter amplifier (THD+N with limiter deactivated: 10%): 100 W\u003c\/li\u003e\n\u003cli\u003eOutput power woofer amplifier (THD+N with limiter deactivated: 0.1%): 120 W\u003c\/li\u003e\n\u003cli\u003eOutput power tweeter amplifier (THD+N with limiter deactivated: 0.1%): 80 W\u003c\/li\u003e\n\u003cli\u003eMains Power Supply: input voltage; frequency: 100-240 V; 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower consumption (230 V \/ 100 V): Standby: 0.3 W\u003c\/li\u003e\n\u003cli\u003ePower consumption (230 V \/ 100 V): Idle: 15 W\u003c\/li\u003e\n\u003cli\u003ePower consumption (230 V \/ 100 V): Full output: 320 W\u003c\/li\u003e\n\u003cli\u003eStandby: automatic, 90 mins (default); user defined in software\u003c\/li\u003e\n\u003cli\u003eCabinet material: Composite polycarbonate front and rear, wooden sleeve\u003c\/li\u003e\n\u003cli\u003eCabinet surface finish; color (front \/ back): Painted; metallic anthracite (RAL 7021) \/ Black (RAL 9005)\u003c\/li\u003e\n\u003cli\u003eOperating conditions: ° C (+50° F to +104° F); \u0026lt;75% RH, non-condensing\u003c\/li\u003e\n\u003cli\u003eTransport\/storage conditions: -25° C to +60° C (-13° F to 140° F); \u0026lt;90% RH; non-condensing\u003c\/li\u003e\n\u003cli\u003eWoofer: 165 mm; (6.5\") with protecting black metal grille\u003c\/li\u003e\n\u003cli\u003eTweeter: 25 mm; (1\") with protecting black metal grille\u003c\/li\u003e\n\u003cli\u003eMounting points: 2 x M6 threaded inserts with 70 mm spacing on back panel; thread depth 15 mm; (5\/8”)\u003c\/li\u003e\n\u003cli\u003eProduct dimensions (height x width x depth): 345 x 225 x 273 mm; (13.58\" x 8.86\" x 10.75\")\u003c\/li\u003e\n\u003cli\u003eInternal net volume: 12.6 l\u003c\/li\u003e\n\u003cli\u003eExternal net volume: 20.4 l\u003c\/li\u003e\n\u003cli\u003ePacked dimensions (height x width x depth), mm (inches): 480 x 303 x 403 mm; (18.9\" x 11.9\" x 15.9\")\u003c\/li\u003e\n\u003cli\u003eProduct weight: 8.0 kg; (17 lbs 10 oz)\u003c\/li\u003e\n\u003cli\u003ePacked weight: 9.4 kg; (20 lbs 12 oz)\u003c\/li\u003e\n\u003cli\u003ePackaging weight inc. Cables and manuals: 1.41 kg; (3 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Neumann","offers":[{"title":"Default Title","offer_id":43894133096491,"sku":"NEU-509132","price":1726.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/NEU-509132-2__07067.1697524477.1280.1280.jpg?v=1775682500","url":"https:\/\/www.empirepro.com\/products\/neumann-kh-150-aes67","provider":"Empire Pro","version":"1.0","type":"link"}