{"product_id":"rdl-ru-fnp","title":"RDL RU-FNP","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThe RU-FN modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial\/industrial installations.\u003c\/p\u003e\u003cp\u003eAPPLICATION: The RU-FN is an RDL Format-A receiver that connects to a Dante-enabled network. It converts the three Format-A audio pairs to Dante networked digital audio channels. Each network channel corresponds to Pair A, B or C of the Format-A input. The unit converts a fourth input, balanced or unbalanced line-level AUX, to Dante.\u003c\/p\u003e\u003cp\u003eOne front-panel green signal LED corresponds to each of the three Format-A input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module’s location. A Dual-LED VU meter facilitates adjustment of the front-panel AUX input gain control. The AUX input supports the complete range of normal unbalanced and balanced line-level sources.\u003c\/p\u003e\u003cp\u003eThe Format-A input jack provides up to 200 mA of power to connected Format-A senders. Multiple senders may be daisy chained from the Format-A input jack.\u003c\/p\u003e\u003cp\u003eThe RU-FN Format-A input supports the entire range of Format-A senders, making each input pair available for end-user connection on various wall plates, or receiving signals from other equipment using rack-mounted, shelf-mounted or utility Format-A senders. The wide array of Format-A senders provides compatibility with commercial audio equipment operating at standard professional levels. High resolution digital audio converters coupled with RDL’s renowned analog filters provide superior fidelity with a very low noise floor. Each Format-A sender may be connected near the RU-FN or up to several thousand feet distant.\u003c\/p\u003e\u003cp\u003eThe RU-FN is powered from an external 24 Vdc power supply, available separately. The external supply powers the RU-FN and Format-A senders connected to the Format-A input. The RU-FNP is equipped for PoE which powers the RU-FN and the connected Format-A senders. If PoE power and an external 24 Vdc supply are both feeding an RU-FNP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external 24 V supply. The power feeding the Format-A RJ45 connector is separately protected by an automatically resetting fuse. A power LED is associated with the connector, facilitating identification of wiring faults.\u003c\/p\u003e\u003cp\u003ePoE relies on the use of a PoE enabled network switch. The RU-FNP will reserve power from the switch even while being powered from an external 24 Vdc supply.\u003c\/p\u003e\u003cp\u003eThe RU-FN is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConverts RDL Format-A and Aux Source to Four Dante Network Channels\u003c\/li\u003e\n\u003cli\u003eEasy Installation with Format-A Connections on RJ45 through CATx Cable\u003c\/li\u003e\n\u003cli\u003eFormat-A Audio Sources from Pairs A, B and C Converted to Dante\u003c\/li\u003e\n\u003cli\u003eFourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input\u003c\/li\u003e\n\u003cli\u003eFront-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input\u003c\/li\u003e\n\u003cli\u003eSignal LEDs Indicate Audio for Each of the Three Format-A Pairs\u003c\/li\u003e\n\u003cli\u003eHigh Resolution 24 Bit Analog to Digital Conversion\u003c\/li\u003e\n\u003cli\u003eLegendary RDL Analog Filtering Enhances Superb Audio Performance\u003c\/li\u003e\n\u003cli\u003ePowers Remote Format-A Senders through Format-A Input Jack\u003c\/li\u003e\n\u003cli\u003eLED Indicators Show Network Sync Status\u003c\/li\u003e\n\u003cli\u003eNormal or Hot-Standby Operation from PoE (Model RU-FNP)\u003c\/li\u003e\n\u003cli\u003eCompatible with Wide Array of RDL Format-A Active and Passive Senders\u003c\/li\u003e\n\u003cli\u003eEquipped for Rack Mounting or Surface Mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"table1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Connector\u003c\/td\u003e\n\u003ctd\u003eRJ45 with Link and Speed indicators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital Audio Ethernet Protocol\u003c\/td\u003e\n\u003ctd\u003eDante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Rate\u003c\/td\u003e\n\u003ctd\u003e100 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSample Rates Supported\u003c\/td\u003e\n\u003ctd\u003e44.1 kHz, 48 kHz (default)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBit Depth Supported\u003c\/td\u003e\n\u003ctd\u003e24 bits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Operating Levels\u003c\/td\u003e\n\u003ctd\u003e-18 dBFS = +4 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFormat-A Input\u003c\/td\u003e\n\u003ctd\u003eRDL Format-A RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFormat-A Signal Pairs Used (3)\u003c\/td\u003e\n\u003ctd\u003eA, B, C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz (± 0.5 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise below +4 dBu\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; -75 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMRR\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 90 dB (50 Hz to 120 Hz, any input pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrosstalk\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 80 dB (20 Hz to 20 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadroom above +4 dBu\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 18 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e\n\u003cbr\u003e\u003cb\u003eAUX Input\u003c\/b\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003eBalanced, detachable terminal block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 20 k?\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Level for +4 dBu\u003c\/td\u003e\n\u003ctd\u003e-16 dBu to +12 dBu, +22 dBu maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz (± 0.75 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise below +4 dBu\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; -75 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMRR\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 60 dB (50 Hz to 120 Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrosstalk\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 80 dB (20 Hz to 20 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadroom above +4 dBu\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 18 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndicators (11)\u003c\/td\u003e\n\u003ctd\u003ePower In (1); Power Out (1); Audio Signal LEDs (3), AUX Dual-LED VU Meter (2), Network Sys and Sync (2), Ethernet Link and Speed (2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Connections (2)\u003c\/td\u003e\n\u003ctd\u003ePower Jack; Detachable Terminal Block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Environment\u003c\/td\u003e\n\u003ctd\u003e0° C to 40° C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirement\u003c\/td\u003e\n\u003ctd\u003e24 Vdc @ 100 mA plus connected loads, or PoE (RU-FNP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE (RU-FNP)\u003c\/td\u003e\n\u003ctd\u003eClass 0, IEEE 802.3af\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e5.8\" (15 cm) W; 1.7\" (4.3 cm) H; 5.2\" (13.2 cm) D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Type\u003c\/td\u003e\n\u003ctd\u003eCardboard Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Dimensions\u003c\/td\u003e\n\u003ctd\u003e6 x 6 x 2.625 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1.61 lbs. (RU-FN); 1.61 lbs. (RU-FNP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWEEE weight\u003c\/td\u003e\n\u003ctd\u003e1.35 lbs. (RU-FN); 1.35 lbs. (RU-FNP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTariff code\u003c\/td\u003e\n\u003ctd\u003e8517.18.0050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":43895096311851,"sku":"RDL-RU-FNP","price":748.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/3019\/5243\/files\/rdl-ru-fnp-2__96394.1682443508.1280.1280.jpg?v=1775683984","url":"https:\/\/www.empirepro.com\/products\/rdl-ru-fnp","provider":"Empire Pro","version":"1.0","type":"link"}