Overview:
Ideal for live sound IEM crowd noise, on-set dialogue capture, broadcasting in noise spaces, and spot miking orchestras, the sE Electronics sE6160 is a shotgun mic with handcrafted, gold-sputtered true condenser capsule and a tight supercardioid/lobar pickup pattern. With switchable -10 or -20 dB pad and 80 or 160 Hz low-cut filter, you can handle nearly any audio source.
Presented here in a factory-matched pair, these condenser mics are ideal for stereo recording applications, especially in live scenarios and video shoots. The extremely tight and specially tuned pickup pattern helps to not only cut out unwanted environmental off-axis noise, it also ensures a high gain before feedback without colorization of signals. The housing is constructed from die-cast metal for durability and sports a 3-pin XLR output. As a true condenser mic, the sE6160 takes common 48V phantom power. The sE6160 matched pair includes two mic clips with thread adapters, two foam windscreens, and a hard carrying case.
Factory-Matched Pair
Available here in a factory-matched pair, this version of the sE6160 is ideal for orchestral miking, drum overheads, percussion, wider crowd coverage during video or audio recordings, multicamera setups with the need to cover large sets, and much more. Having two perfectly matched condenser mics is the way to go when engaging in any form of stereo recording.
Custom-Made Shotgun Capsule
The handcrafted, in-house designed true condenser capsule with a gold-sputtered diaphragm ensures crystal clarity and uncolored sound.
Attenuation Pad
The attenuation switch allows you to reduce the microphone’s signal by 10 or 20 dB. This can be helpful for loud sources, preventing overload on your audio interface. When this switch is in its center position, it has no effect on the microphone output.
Low-Cut Filter
The low-cut switch allows you to adjust the bass response of your source. When engaged, the microphone's low-frequency response is rolled off at 80 or 160 Hz. When this switch is in its center position, it has no effect on the microphone output.
Specs:
Microphone Type
Shotgun
Polar Pattern
Supercardioid / Lobar
Element Type
Condenser
Controls
Low Cut/HPF, Pad
Frequency Response
20 Hz to 20 kHz
Maximum SPL
137 dB (Pad Disengaged)
Analog Output
1x XLR 3-Pin Male (Locking)
Power Sources
Phantom Power
Microphone
Microphone Type
Shotgun
Polar Pattern
Supercardioid / Lobar
Element Type
Condenser
Sound Field
Mono
Orientation
End Address
Controls
Low Cut/HPF, Pad
Pad
-10 / -20 dB
Filter & EQ
Low-Cut Filter: 80 Hz / 160 Hz
Circuitry
Solid-State
Performance
Frequency Response
20 Hz to 20 kHz
Maximum SPL
137 dB (Pad Disengaged)
Sensitivity
25 mV/Pa
Dynamic Range
124 dB (Pad Disengaged)
134 dB (-10 dB Pad Engaged)
144 dB (-20 dB Pad Engaged)
Equivalent Noise Level
13 dB (A-Weighted)
Connectivity
Analog Output Connector
1x XLR 3-Pin Male (Locking)
Power
Power Sources
Phantom Power
Operating Voltage
48 V
Physical
Color
Black
Mounting Thread Size
5/8"-27 Female
Dimensions
ø: 0.77 x L: 9.84" / 1.96 x L: 24.99 cm
Weight
3.88 oz / 110 g
Packaging Info
Package Weight
2.865 lb
Box Dimensions (LxWxH)
14.4 x 10.5 x 3.6"